V-TAC VT-1159 Pole Lamp Instruction Manual
- June 12, 2024
- V TAC
Table of Contents
V-TAC VT-1159 Pole Lamp
Product Information
- Product Name: Pole Lamp
- Model: VT-1159
- SKU: 10423
- Watts: 60W
- Input Power: AC 220-240V, 50/60Hz
- IP Rating: IP44
- Holder: E27 (Bulb not included)
- Unit Color: Matte Black
- Material: Aluminium+Iron+Glass
- Dimension: 250x250x975mm
Product Usage Instructions
- Turn off the power.
- Mark drilling area with a 135mm gap.
- Drill the holes in the ground.
- Dig the plastic into the hole.
- Fix the screws in the holes.
- Tighten the stand parts.
- Open the lamp to install the bulb.
- Install the bulb on the holder.
- Connect supply leads with terminal brown (L) to brown, blue (N) to blue, and greenish-yellow ( ) to greenish-yellow.
- Tighten the screws to fix the wires.
- Tighten the nuts to fix down the stand.
- Check the whole fitting is correct.
- Turn on the power.
If you have any queries or issues with the product, please reach out to us at SUPPORT@V-TAC.EU. For a wider range of products and inquiries, please contact our distributor or nearest dealers.
V-TAC EUROPE LTD.
Bulgaria, Plovdiv 4000 BUL.L.Karavelow 9B
TECHNICAL DATA
- MODEL: VT-1159
- SKU: 10423
- WATTS: 60W
- INPUT POWER: AC:220-240V,50/60Hz
- IP RATING: IP44
- HOLDER: E27 [Bulb not included]
- UNIT COLOR: Matte Black
- MATERIAL: Aluminium+Iron+Glass
- DIMENSION: 250x250x975mm
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 3 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.!
WARNING
- Ensure Electricity is switched off before installation
- Please read through all following instruction before installing the unit.
- User should prepare necessary accessories and spare parts (Not Provided)
- Installation must be performed by a qualified electrician
- Proper grounding should be ensured throughout the installation.
MULTI-LANGUAGE MANUAL QR CODE
Please scan the QR code to access the manual in multiple languages.
This marking indicates that this product should not be disposed of with other household wastes.
Caution, risk of electric shock.
INSTALLATION INSTRUCTION
- Turn off the power.
- Mark drilling area with 135mm gap.
- Drill the holes in the ground.
- Dig the plastic into the hole.
- Fix the screws in the holes.
- Tighten the stand parts
- Open the lamp to install the bulb.
- Install the bulb on the holder.
- Connect supply leads with terminal brown (L) to brown, blue (N) blue and greenish-yellow ( ) to greenish-yellow.
- Tighten the srews to fix the wires.
- Tighten the nuts to fix down the stand.
- Check whole fitting is correct.
- Turn on the Power
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>