V-TAC VT-15111ST LED Solar Street Light Instruction Manual

: June 12, 2024
: V TAC

Table of Contents

TECHNICAL DATA
INTRODUCTION & WARRANTY
PARTS INCLUDED
REMOTE CONTROL
INSTALLATION GUIDE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

INSTRUCTION MANUAL
LED SOLAR STREET LIGHT V-TAC VT-15111ST LED Solar Street
Light

TECHNICAL DATA

MODEL	VT-15111ST	VT-15200ST	VT-15300ST
SKU	10224
10225	10226
10227	10228

INTRODUCTION & WARRANTY

Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. This product is warranted for manufacturing defects only.

V-TAC VT-15111ST LED Solar Street Light - qr code http://vtac.store/vt-15111st

WARNING

Installation must be performed by a qualiﬁed electrician
Replace any cracked protective shield.
Keep away from the ﬁre.
Don’t immerse in the water
Luminaire cannot be installed in low-lying areas, so as not to soak.

This marking indicates that this product should not be disposed of with other household wastes.

PARTS INCLUDED

V-TAC VT-15111ST LED Solar Street Light - PARTS

REMOTE CONTROL

V-TAC VT-15111ST LED Solar Street Light - CONTROL

INSTALLATION GUIDE

Before installing please remove all the parts to check if all are in good condition or not.
Install the Protruding Pole on a wall or on a Lamp Pole with the Expansion Screws
Fix the Solar Panel on the Bracket. Fix them on the Mounting Arm and tighten the screws.
Place the Mounting Arm on the top pole part of the Protruding Pole
Fix the Luminaire on the front portion of the Protruding Pole
Make sure that the connection Plug on the luminaire is carefully stretched out from the hole beneath the Protruding Pole
Now Connect the plugs and tighten the Waterproof Cap.
The luminaire should be connected to the solar panel against the sun light. Please makes sure the solar panel is adjusted in correct angle in order to receive sunlight.
After installation test the light using the remote control.
The remote control is designed with an operation distance of 8-10m

MAINTENANCE

Clean the light with a dry, lint-free cloth.
Check the solar panel for dirt regularly. If dirt or is present remove it to guarantee ﬂawless function of the product.
Especially during the winter, keep the product free from snow and ice.
Conﬁrm installation direction is correct (solar panel should be at top)
Conﬁrm no objects blocking the solar panel to receive sunlight

IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS.
V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B