lorelli LYNX Isofix Car Seat Instruction Manual
- June 12, 2024
- lorelli
Table of Contents
Safe Travel
car seat
LYNX Isofix
group: 0+ / 1 / 2 / 3
0-36 kg
from birth up to 12 years
MANUAL INSTRUCTION
designed in EU
V 1.4
www.lorelli.eu
find us
on
Scan the QR code to get more product information and manual instruction in more languages. Download QR Scanner App onto your device.
https://lorelli.eu/media/documents/products/Car%20Seats/LYNX%20Isofix_Manual%20Instruction.pdf
FEATURES
| 
---|---
| 
| 
IMPORTANT! KEEP FOR FUTURE REFERENCE! READ CAREFULLY!
NOTICE
When using as Universal category (Group 0+;1;2;3) please notice below
information:
- This is a ‘Universal’ child restraint. It is approved to Regulation No 44, 04 series of amendments, for general use in vehicles and it will fit most, but not all, car seats.
- A correct fit is likely if the vehicle manufacturer has declared in the vehicle handbook that the vehicle is capable of accepting a ‘Universal’ child restraint for this age group.
- This child restraint has been classified as ‘Universal’ under more stringent conditions than those which applied to earlier designs which do not carry this notice.
- If in doubt, consult either the child restraint manufacturer or the retailer.
- Only suitable if the approved vehicles are fitted with lap/3 point/static/with retractor safety belts, approved to UN/ECE Regulation No 16 or other equivalent standards.’
Please read the instructions carefully, because improper installation may
cause serious injury, in this case, the manufacturer is not responsible.
This car seat is approved for use with the following types of installation
methods:
-
UNIVERSAL: Group 0+ (0-13kg) Installation with : Three-point car seat belts + 5-point harness (rearfacing installation)
-
ISOFIX SEMI-UNIVERSAL: Group 0+ (0-13kg) Installation with : ISOFIX + top tether + harness (rear-facing installation)
2.1.This is an ISOFIX CHILD RESTRANINT SYSTEM. It is approved to Regulation No.44,04 series of amendments for general use in vehicles fitted with ISOFIX anchorages systems
2.2. It will fit vehicles with positions approved as ISOFIX positons (as detailed in the vehicle handbook),depending on the category of the child seat and of the fixture
2.3. The mass group and the ISOFIX size class for which this device is intended is: Class “D ” for Group 0+(0-13 kg); -
UNIVERSAL: Group I (9-18kg) Installation with : Three-point car seat belts + 5-point harness((forward installation)
-
SEMI-UNIVERSAL: Group I (9-18kg) Installation with : 3-point seat belt + additional attachment (FIT) + 5-point harness (forward installation)
-
UNIVERSAL: Group II (15-25kg) Group III (22-36kg) Installation with : Three-point car seat belts(forward installation)
-
SEMI-UNIVERSAL: Group II (15-25kg), Group III (22-36kg) Installation with :
3-point seat belt + additional attachment (FIT). (forward installation)
When using as Semi – Universal category ( Group 0+;1;2;3) please notice below
information:
This child restraint is classified for “Semi – universal “use and it is
suitable for fixing into the seat positions of the following cars:
Please check
Appendix 1 with list of car suitable for Semi-universal fixing at the end of
the instruction.
Important safety instructions!
- WARNING! Keep the child restraint system rear-facing until the child’s mass is greater than 9 kg!
- WARNING! The rigid items and plastic parts of a child restraint shall be so located and installed that they are not liable, during everyday use of the vehicle, to become trapped by a movable seat or in a door of the vehicle.
- WARNING! All straps holding the restraint to the vehicle should be tight, all straps restraining the child should be adjusted to the child’s body. The straps should not be twisted!
- WARNING! The device should be changed when it has been subject to violent stresses in an accident.
- WARNING! Important! Ensure that any lap strap is worn low down, so that the pelvis is firmly engaged.
- WARNING! It is dangerous to make any alterations or additions to the device without the approval of the Type Approval Authority. Your child is in danger if you don’t follow closely the installation instructions provided by the child restraint manufacturer.
| EXTREMELY DANGEROUS!
Do not place rear-facing child seat on front seat with airbag. Death or serious injury can occur.
---|--- - WARNING! Follow closely the instructions for installation. Failure can result in injury to the child!
- WARNING! Do not leave the child unattended in the safety device!
- WARNING! Any luggage or other objects liable to cause injuries in the event of a collision shall be properly secured.
- WARNING! Do not use the child restraint system without the cover.
- WARNING! Do not replace the seat cover with any other than the one recommended by the manufacturer, because the cover constitutes an integral part of the restraint performance.
- WARNING! Do not use any load bearing contact points other than those described in the instructions and marked in the child restraint. Ensure the vehicle seat buckle is not positioned in or in front of the specified (labelled) belt guide of the child restraint system.
- WARNING! If the child restraint offers an alternative load bearing contact point and you judge, that the use of this alternative route is unsatisfactory, please contact the child restraint manufacturer.
- WARNING! Install the child restraint in vehicle seating positions categorized as ‘Universal’ in the vehicle owner’s manual, by using the primary belt route.
- WARNING! Rearward child restraint systems should not be used in seats protected by an airbag.
- WARNING! If the chair is not provided with a textile cover, keep it away from sunlight, otherwise it may be too hot for the child’s skin.
- WARNING! Do not use the car seat in the house. It is not designed for home use and should only be used in the vehicle!
- WARNING! Before you adjust any movable or adjustable parts of your child seat, you must remove your baby from the child seat.
- WARNING! Periodically check the belts for wear, paying special attention to the points of attachment, protections and regulating devices.
- WARNING! Do not leave the buckle in a partially closed position and it must only lock when all parts are engaged. It must be possible to release the child from the restraint immediately in an emergency. Your child must be taught never to play with the buckle.
- WARNING! The baby seat must be secured with car safety belt, even when it is not in use. An unsecured seat may injure other passengers in the car in an urgent stop.
- WARNING! Store this child seat in a safe place when it is not being used. Avoid placing heavy objects on top of it. Do not allow your child seat to come into contact with corrosive substances e.g. battery acid.
- WARNING! Contact the child restraint manufacturer if you identify an unsatisfactory position of the adult safety belt buckle relative to the main load bearing contact points on the restraint.
- WARNING! In case of an ISOFIX child restraint system, please read the car manufacturer’s handbook.
- WARNING! Do not leave your child in this safety seat for a long period of time. By long trips make more breaks and take out the child from the safety seat.
ECE R44/04
TYPES OF APPROVED BELTS TO HAVE IN THE CAR
А – Car safety belt – Diagonal Belt
B – Car safety belt – Lap Belt
C – ISOFIX Attachments
Your child seat can be installed with the help of 3-point belts !!! In the
direction of movement of the vehicle for Group 1;2;3 ( 9-36kg.) !
Your child seat can be installed with ISOFIX anchorages and top tether,
rearward for Group 0+ ( 0-13 kg.) (rear-facing installation).
Possibility to install ONLY on seats with 3-point seat belts for Groups 1;2;3
( 9-36kg.) (forward installation)
CAN NOT BE USED FOR SEATS with 2-point belt!
WASHING INSTRUCTIONS
- The car seat can be cleaned using lukewarm water and soap. Do not use aggressive cleaners like abrasives or thinner.
- The cover should be washed by hand at a maximum temperature of 30 °C. Do not put in the dryer, just airing it.
- The plastic parts can be cleaned by using a wettish drapery. Please, do not use any solvate.
Features
Picture A
1. ISO FIX Guides
2. ISO FIX Connector
3. ISO FIX Release button
4. Base
5. Release handle for rotation of the seat
6. Recline Adjustment Handle
7. Harness Adjustment Strap
8. Adjustment Device
9. Buckle Pads
10. Harness Buckle
11. Harness Strap
12. Shoulder Pads| 13. Baby Insert
14. Head Pillow
15. Headrest
16. Headrest Handle
17. TT Release button
18. Top Tether Strap
19. Cover
20. Shoulder belt guide
21. Shell
22. Release button
23. Guide hook
24. Guide hole
---|---
-
Adjusting the tilt of the seat
The child seat can be adjusted in 4 positions. (Picture 1; 2) Recline position “4” for Group 0+; Position 1;2;3 for Group I; Position 1 for Group II;III . Pull the positioning handle in the front part under the seat and then push or pull the seat forward or bakward. Release the handle to the desired position and press down until you hear a “click”. Make sure the seat is locked. -
Adjusting the length of the belts
2.1. Slack the belts: Press the button for belts adjusting “8 ” (Picture 3) and at the same time pull both shoulder straps “ 11 “. (Picture 4) Note: Do not pull the shoulder pads .
2 .2. Tightening the belt: Place your child in the seat, fasten both belts in the buckle in the centre and pull the bar in the middle of the seat. (Picture 8;9 ) -
Fastening the seat belt
3 .1. Combine the two metal pieces at the end of the belt (Picture 5) and place them in the central buckle (Picture 6) until it clicks into place.
3.2. Make sure the belt is locked by pulling the shoulder straps up.
3.3. To release belt, press down the red button “ 22 “ on the central buckle. (Picture 7) -
Removing the upholstery
4.1. Remove the upholstery of the seat and backrest as shown in Fig.52;53 -
Adjustment of the height of headrest and shoulder belts :
The headrest can be set at 11 different heights .
Adjustment of the height of the shoulder belts is done simultaneously with the adjustment of the height of the headrest. Pull up the adjusting handle (16) Fig.10 move the headrest to the desired position up or down according to the height of your child. Release the handle and you must hear a clicking sound that is signal that the backrest is locked. It is important to make sure the headrest fit properly to head. Pic. 11 Group 0 +; I: The correct height of the shoulder belts is attained when the belt disappears into the shell slightly above the shoulder of the child. Make sure that the harness straps fit properly over the shoulders of the child. Group II; III The head rest of the safety seat should be adjusted to provide about two fingers between the child’s shoulder and the lower edge of safety seat head . Picture 12
For the protection of all passengers in the vehicle: In the case of an
emergency stop or an accident, unsecured persons or objects may cause injury
to other passengers. Please always check that :
– The backrests of the vehicle seats are locked. (i.e. that a foldable rear
seat bench latch is engaged)
– All heavy or sharp-edged objects in the vehicle ( e.g. on the parcel shelf)
are secured.
– All persons in the vehicle have their seat belts fastened.
– The child safety seat is always secured when it is in the vehicle , even
without transported child.
To protect your vehicle:
Some vehicle seat covers are from sensitive materials ( e.g. velour, leather,
etc.)and may develop wear marks when child seats are used. This can be
avoided, by placing a blanket or towel under the child safety seat.
INSTALLATION OF SEAT “Group 0+” / newborn and weighing up to 13 kg. /Attaching of the car seat with ISOFIX and Top tether.
IMPORTANT: First please check if there are 2 ISOFIX anchorings in the
perpendicular intersection of the vehicle seat back and seat cushion, and the
user-ready top tether anchoring behind the vehicle seat.
Tips: The user-ready tether anchorage usually permanently installed on the
inner rear luggage shelf or on the vehicle floor. For details you could read
your vehicle guidelines or contact the vehicle manufacturer.
NOTE: When using the ISOFIX system, the ISOFIX guide sleeves can be
inserted into the ISOFIX anchorages on the vehicle. ( Picture 13;17-1) The
ISOFIX anchorages on both ends are pushed inward along the guide sleeves.
Step 1. Group 0+: The child seat can be used only in the most backward
inclined position. (Picture 2 , Pos.4) Pull the positioning handle and place
the child seat in the most backward inclined position (Picture 1;2 )
Step 2. Press the Release button to release the ISOFIX connectors. Than you
can hear an audible sound “click” Picture 14 Slide the rails till the longest
position .
Step 3 . Pull and hold the release handle for rotation of the child seat “5 “
and rotate the seat at 180 º so that the marking of the seat to match with
position the blue position on the base. Picture 15 Release the handle and
ensure that the child seat is fixed.
WARNING ! DO NOT USE THE CHILD SAFETY SEAT ADJUSTED AT 90º OF THE SIDE OF
MOVEMENT OF THE CAR !!! THIS CHILD SEAT SHOULD BE USED ONLY AT FOREWARD OR
REARWARD SIDE OF THE MOVEMENT OF THE CAR !!!
Step 4 . Place the child seat on the seat of the car, it must be oriented in
the direction opposite to the movement! Picture 16 This is the safest position
for your child so it is advisable to use it as long as possible! If your car
has an air bag on the passenger seat, the child seat should be used only in
the rear of the car!
Step 5. Push the ISOFIX connectors directly into the anchorages until you hear
an audible sound “click”. Picture 16 Make sure that you have heared a “click ”
and the ISOFIX latching indication shows GREEN Picture 17.03
Step 6. Push firmly the child seat towards the car seat backrest. Picture 17
During this moving the ISOFIX system will tighten the child seat to the car
seat backrest and you will hear a “Click” sound . Ensure that the child seat
is firmly pressed to the car seat backrest. Check the ISOFIX release button
again and ensure the latching indication shows GREEN. Picture 17
Step 7. Grasp the seat body to check the seat if it is fastened tightly or
shakes. If the seat shakes and the ISOFIX connectors are pulled out, please
repeat the above steps and install it again. Picture 18
Step 8. Pull out the Top tether and press the Tether strap release button to
extend the strap until it is long enough to hook the User-ready tether
anchorage behind. Picture 19 Guide the top tether around the both sides of the
backrest of child seat and around the headrest of the car. Picture 20
Step 9. Hook the Tether strap hook onto the User-ready anchorages. Check there
maybe are 3 anchorages for the hook, please find one in your favor. Picture 21
Step 10. Pull the Tether strap on another end back to tighten the Top tether.
CAUTION: If the Top tether is tightened favorably and correctly, a green
mark will turn up on the other end of the Strap release button, please do
check it. Picture 22
Step 11. Place the child in the seat. Check the height of the shoulder belts.
Make sure the straps are not twisted or hanging somewhere. Fasten the seat
belts on the child, making sure that they are well placed and pull the strap
in the centre of the seat to tighten. Ensure five points buckle is locked (
Picture 4;5;6;7;8;9)
INSTALLATION OF SEAT “Group 0+” / newborn and weighing up to 13 kg. /With 3-point seat belt
Please use 3-point safety belts of the car to secure the child seat!
Step 1. Group 0 + The child seat can be used only in the most backward
inclined position. (Picture 24) Pull the positioning handle and place the
child seat in the most backward inclined position (Picture 1;2;23;24 ) This is
the safest position for your child so it is advisable to use it as long as
possible.
Step 2. Pull and hold the release handle for rotation of the child seat “5 “
and rotate the seat at 180 º so that the marking of the seat to match with the
blue position on the base. Picture 18;26
Step 3 . Place the child seat on the seat of the car, it must be oriented in
the direction opposite to the movement. ( Picture 25) If your car has an air
bag on the passenger seat, the child seat should be used only in the rear of
the car!
Step 4. Unlock the harness and lift up the inner cushion. Picture 26 Pull out
the entire car seat belt. Pass the lap part of the seat belt thought the guide
holes at the both sides of the safety seat (Picture A position 24) and fasten
the clip to the corresponding buckle till click is heard. Check that the belt
buckle is locked by pulling the belt. ( Picture 28)
Step 5. Pass the upper diagonal part of the belt in the belt guide behind the
seat back, and pull to fasten the belt. Picture 29;30 Put the inner cushion
back. (Picture 31)
Step 6. Make sure that the belt is not twisted and strongly tightened. Make
sure the seat is fixed firmly on the car seat. ( Picture 32)
Step 7. Place the child in the seat. Check the height of the shoulder belts.
Make sure the straps are not twisted or hanging somewhere. Fasten the seat
belts on the child, making sure that they are well placed and pull the strap
in the centre of the seat to tighten. ( Picture 4;5;6;7;8;9)
INSTALLATION OF SEAT
“Group I” / 9 to 18 kg. / With 3 – Point Belt
Please use 3-point safety belts of the car to ensure the safety of the child
and to secure the child seat!
Step 1. Place the child seat on the car seat forward-facing and make sure that
the back of the child seat is firmly pressed against the car seat backrest.
Picture 36 WARNING ! Make sure that the child seat is correctly adjusted for
installation at forward position . If it’s needed pull the adjusting handle “5
“ ( Picture A) and rotate the seat in forward position.
Step 2. Pull out the entire car seat belt. Picture 36 Pass the diagonal belt
between the backrest and headrest through the belt guide and lap belt through
the belt guides at the bottom of child’s seat as shown at Picture 37 Make sure
that the both parts of the car belt are under the harness of the child seat !
Step 3. Clip the lap belt and diagonal belt into the car buckle until hear a
“Click” and then pull them to tighten the child seat. ( Picture 38;39)
Step 4. Place the child in the seat. Check the height of the shoulder belts.
Make sure the straps are not twisted or hanging somewhere. Fasten the seat
belts on the child, making sure that they are well placed and pull the strap
in the centre of the seat to tighten. ( Picture 4;5;6;7;8;9)
INSTALLATION OF SEAT “Group I” / 9 to 18 kg./
With 3-point seat belt + additional attachment (FIT).
Step 1. IMPORTANT: First please check if there are 2 ISOFIX anchorings in the
perpendicular intersection of the vehicle seat back and seat cushion, and the
user-ready top tether anchoring behind the vehicle seat.
NOTE: When using the ISOFIT system, the ISOFIX guide sleeves can be inserted
into the ISOFIX anchorages on the vehicle. (Picture 13; 35.1) The ISOFIX
anchorages on both ends are pushed inward along the guide sleeves
Step 2. Press the Release button to release the ISOFIX connectors. (Picture
14) Than you can hear an audible sound “click” Slide the rails till the
longest position. WARNING ! Make sure that the child seat is correctly
adjusted for installation at forward position . If it’s needed pull the
adjusting handle “5 “ ( Picture A) and rotate the seat in forward position.
WARNING ! DO NOT USE THE CHILD SAFETY SEAT ADJUSTED AT 90º OF THE SIDE OF
MOVEMENT OF THE CAR !!! THIS CHILD SEAT SHOULD BE USED ONLY AT FOREWARD OR
REARWARD SIDE OF THE MOVEMENT OF THE CAR !!!
Step 3. Place the child seat on the seat of the car, it must be oriented in
the direction of movement. Picture 34;35 If your car has an air bag on the
passenger seat, the child seat should be used only in the rear of the car!
Step 4. Push the ISOFIX connectors directly into the anchorages until you hear
an audible sound “click”. Make sure that you have heard a “click ” and the
ISOFIX latching indication shows GREEN Picture 35
Step 5. Push firmly the child seat towards the car seat backrest. During this
moving the ISOFIT system will tighten the child seat to the car seat backrest
and you will hear a “Click” sound . Ensure that the child seat is firmly
pressed to the car seat backrest. Check the ISOFIX release button again and
ensure the latching indication shows GREEN.
Step 6. Grasp the seat body to check the seat if it is fastened tightly or
shakes. If the seat shakes and the ISOFIT connectors are pulled out, please
repeat the above steps and install it again.
Step 7. Please repeat the steps from 2 to 4 for installation on the car seat
described in Group I /9 to 18 kg. / with 3 – Point Belt
INSTALLATION OF SEAT “Group II;III” / 15 to 36 kg./ With 3-point seat belt + additional attachment (FIT).
IMPORTANT: When using the seat for group 2;3 15-36 kg. You should remove
the buckle pads and baby insert Picture A positions 9;13;14 and to hide the
buckle and shoulder belts under the upholstery.
Step 1. Release the 5 point harness of the child seat as pushing the red
button of the buckle. Picture 42
Step 2. Loose the harness straps by pressing the release button and pulling
the harness straps as far as you can. Picture 43 Note: Do not pull the
shoulder pads.
Step 3. Open the lid in the backrest of the upholstery ( Picture 44 ) and hide
the shoulder belts into the opening ( Picture 45;46) Close the lid. Hide the
buckle under the upholstery into the opening of the seat ( Picture 47 ) . Pull
the strap in the middle of the seat and hide it back through the opening under
the upholstery. The car seat must be looks like picture 48.
Step 4 . Please repeat the steps from 1 to 6 for installation on the car seat
described in Group I / 9 to 18 kg. / With 3-point seat belt + additional
attachment (FIT)
Step 5. Place the child into the safety seat. Position the shoulder belt
through the hook over the shoulder of the child and lap belt over the seat and
lap of the child. Picture 50 Pass the belt through the lower opening into the
seat of the safety seat and fasten the clip to corresponding buckle until
click is heard.
Picture 50 Check that the belt buckle is locked by pulling the belt. Picture
51
Step 6. Make sure the belt is properly positioned across all guides, not
twisted and does not interfere with the child.
INSTALLATION OF SEAT
“Group II; III / to 36 kg / With 3 – Point Belt” 15.
Press the Release buttons and retract the ISOFIX connectors into the seat
Picture 41 Please use 3-point safety belts of the car to ensure the safety of
the child and to secure the child seat!
Step 1. Group II ; III from 15 to 36 kg. Place the child seat on the seat of
the car, it must be oriented in the direction of movement in an upright
position. Picture 49B
Step 2. Place the child into the safety seat. Position the shoulder belt
through the hook over the shoulder of the child and lap belt over the seat and
lap of the child. Pass the belt through the lower opening into the seat of the
safety seat and fasten the clip to corresponding buckle until click is heard.
Check that the belt buckle is locked by pulling the belt. Picture 50;51
Appendix
1 – List of cars suitable for fixing semi-universal
| Trade name of vehicle| Vehicle model(s)
---|---|---
1| ALFA ROMEO| 156 Cross Wagon Q4, 156 Sportwaqon, MiTo
2| AUDI| Al, Al Sportsback, A2, A3 (5 doors), A3 (3 doors), A3 Sportsback, A3,
A3 (facelift), A4, S4, RS4, A5, AS Cabrio, S5 Cabrio, AS Cabrio, AS Sportback
(5 doors), A6, S6, A6 Allroad Quattro, A6 Avant, A7 Sportsback (4 seats), A7
Sportsback (5 seats), A8, S8, Q3, 05, Q7, TT, TT Roadster
3| BMW| 5 series, 5 GT, 5 Touring, 6 series, 6 Coupe, 6 GranCoupe, 7 series,
M5, Mini, Mini 2, Mini Club Man, Mini Countryman, X1, X3, X5, X6, Z4
4| CADILLAC| CTS
5| CHEVROLET| Aveo, Aveo Hatchback, Captiva, Cruze SW, Epica, HHR, Lacetti,
Matiz, Nubria, Orlando, Spark, Volt
6| CHRYSLER| Crossfire, 300 C, Grand Voyager, PT Cruser, Sebring, Voyager,
Voyager Shown Go
7| CHRYSLER DODGE| Caliber, Journey, Nitro, Ram (1500/5 doors)
8| CHRYSLER JEEP| Cherokee, Grand Cherokee, Commander, Wrangler
9| CITRO EN| Berlingo I, Berlingo II, Berlingo III, Berlingo Multi Space, Cl,
C2, C3 Pluriel, C3 Picasso, C3, C4 II, C4 Aircross, C4 Picasso, C4 Picasso, C4
Grand Picasso, C4 Grand Picasso, C5 Break, C5, C6, C8, C-Crosser, DS3, DS4,
DSS, Jumpy, Nemo
10| FIAT| Bravo (Typ 198), Croma, Doblo, Dublo II, Fiorino Qubo, Freemont,
Idea, Multipla, Panda, Punto (Typ 188), Punto (Typ 199), Punto EVO, Grande
Punto, Stilo, Stilo Multi Wagon. Scudo 2. Ulysse
11| FORD| C-MAX, Grande C-MAX, Fiesta (MK7/5 doors), Focus, Focus Tumier,
Focus Turnier, Galaxy, Kuga, Maverick, Mondeo, Mondeo Turnier, Mondeo Turnier,
S-MAX, Tourneo Connect, Transit/Transit Connect, Transit Kombi
12| HONDA| Accord (4+5 doors), Accord Tourer (5 doors), Accord Tourer, City (4
doors), Civic 9, CR-V, FR-V (6 seats), Jazz (5 doors), Pilot
13| HYUNDAI| Getz, H-1 Travel, i10, i20, i30+i30cw, i40, i40cw, ix20, ix35,
ix55, Matrix, Santa Fe, Sonata,Sonica, Sonata,i40, Terracan, Tucson
14| JAGUAR| S, XJ
15| JEEP| Grand Cherokee, Wrangler Unlimited
16| KIA| Carens, Carnival, Cee’d, Pro Cee’d, Cerato, Magentis, Opirus,
Picanto, Picanto, Picanto (3 doors), Rio, Rio (5 seats), Sedona, Sorento,
Soul, Sportage, Venga
17| LANDROVER| Discovery2, Discovery3, Discovery (facelift), Freelander 1,
Freelander 2, Range Rover, Range Rover Evoque, Range Rover Sport
18| LEXUS| CT 200h, iS, GS 450h, RX 300, RX 350, RX 400h
19| MAZDA| 2 series, 3 series, 5 series, 6/Atenza Kombi, 6 Sport Kombi, CXS,
CX7, MPV, MX5 (Typ NB/2 seats), Premacy
20| MERCEDES BENZ| A class, B class, C class, C(W2041S204), C Coupe, C (Model
T), CL class, CLS class, CLS(C218) class, E class, E(W211/S211),
E(C207/W212/S212), E(A207), E Cabrio(A207), G(W463), GL, GLK, M, ML,
R(W251N251), 5, Vaneo, Viano, Viano, Viano fun, Vito
21| MITSUBISHI| Colt(5 doors), Grandis, i-MiEV, Lancer Kombi, Lancer,
Outlander, Pajero V80, Shogun
22| NISSAN| Almera, Cuba(Z12), Juke, Maxima(A33), Micra(K11), Micra(K12),
Micra(K13), Micra Cabrio, Murano, Navara, Note, Pathfinder, Pathfinder(R51),
Pixo, Primera (P11) Traveller, Primera (P12), Qashqai, Qashqai+2, Tiida,
X-Trail
23| OPEL| Agila B, Ampera, Antara, Astra, Astra J, Astra J GTC, Astra J Sport
Tourer, Astra Twin Top, Combo C, Corsa C, Corsa D(5 doors), Corsa (4 doors),
Insignia, Insignia Sports Tourer, Meriva, Meriva B, Signum, Vectra, Zafira A,
Zafira B, Zafira B, Zafira C Tourer
24| PEUGEOT| 1007, 206cc, 206SW, 207CC, 208, 307, 307SW, 307 SW (5 doors),
308, 308 CC, 308 SW, 308 SW, 3008 Crossover, 4007, 4008, 508, 508 SW, 5008,
807, Expert, Partner (5 doors), Partner Tepee
25| PORSCHE| Cayenne, Panamera
26| RENAULT| Cilo III, Cilo Grandtour III, Espace, Grande Espace, Fluence,
Kangoo, Kangoo be bop, Koleos, Laguna III, Laguna Grandtour, Laguna Grandtour
III, Megane Cabrio, Megane, Megane II, Megane III, Megane III GrandtourModus,
Modus, Grand Modus, Scenic, Scenic II, Scenic III, Grand Scenic, Traffic,
Twinqo, Twinqo II, Vel Satis
27| SEAT| Alhambra, Allea FR/XL/Freetrack, Arosa, Exeo, Exeo Kombi, Exeo ST,
Ibiza(6J), Ibiza(6K), Leon, Mii, Toledo M1, Toledo
28| SKODA| Citigo, Fabia II, Felicia, Octavia, Octavia II, Octavia II, Octavia
II, Octavia Tour, DriveRoomster, Superb, Superb II, Superb Kombi. Yeti
29| SMART| Forfour, fortwo, fortwo II
30| SUBARU| Forester. Impreza. Legacy. Outback. Trezia. Tribeca
31| SUZUKI| Alto, Ignis, Jimmy, Kizashi, Splash, Swift, SX4, Vitara, Wagon R
32| TOYOTA| Auris, Auris Hybrid, Avensis, Avensis Verso, Avensis Combi, Aygo,
Corolla, Corolla Verso, iQ, Land Cruiser 120, Land Cruiser (J12), Land Cruiser
V8, Land Cruiser, Prius+, Prius 3, RAV 4, Urban Cruiser, Verso S, lads (5 doors),lads III
33| VOLVO| C70, S40, S60, S80, V50, V60, V70, XC70, XC80, XC90
34| VW| Amarok, Beattle, Bora, Caddy, CC, EOS, EOS, FOX, Golf IV, Golf IV,
Variant, Golf V, Golf V (R32), Golf V Variant, Golf Cabrio, Golf V Plus, Golf
VI, Golf VI Cabrio, Golf VI R, Golf VI Variant/Plus, Lupo, Passat, Passat B7
Altrack, Passat B7 Variant, Phaeton, Polo, Polo V, Cross Polo IV, Cross Polo
V, Scirocco III, Sharan, Sharan II, T4 Caravelle CUGL, T4 Multivan II, T5
Multivan, T5 Garay°Ile, T5 Caravelle (long version), T5 Kombi, T5 Kombi (long
version), Tiguan, Touareq, Touareq II, Touran, Touran Cross, Up
35| Tianjin Xiali| TJ7101AE3, TJ7101ALE3, TJ7101AUE3, TJ7101AULE3, TJ7101BE3,
TJ7101BLE3, TJ7101BUE3, TJ7101BULE3, TJ7141AE3, TJ7141ALE3, TJ7141AUE3,
TJ7141AULE3, TJ7141BE3, TJ7141BLE3, TJ7141BUE3
36| BYD| FO, F3, F3R, G3, G3R„G5, G6, S6, S7, F3DM, E6, L3, M6, F6, S8
37| Great Wall| C2OR, M2, C30, C50, M4, C70, Ml, H6, H8, H1, H2,
38| Geely| MR7131D, MR7150B4, MR7151B4, MR7151EA4, MR7152D, MR7180D, MR7181,
MR7181B1
39| Lifan| LF7130F, LF7131B, LF7132B, LF7152, LF7162B, LF7162E
40| Haima| 7161, 7162, 7163, 6480, Haima 3, M2, M3, M5, M8, M6, S6, S7
41| Beijing auto| BJ20, BJ80, S2, S3, S6, H3, H2, H6, D20, CC, D50, D60, D70,
D80, X25, X65, X55, M20, M30, T205-D
42| FODAY| F16, F22, F128
43| GAC| GA3, GA5, GA6, GS4, GS5, GX5, GX6, GL, GP150, G3, G5
44| LANDWIND| X5, X7, X8, X9, X6
45| CHERY| E3, E5, M7, A3, A5, X1, G2, M1, M5, G3, G5, G6
46| ZOTYE| Z700, SR7, E30, Z100, Z300, Z500, T200, X5, T600, V10, E20, E200,
T300, M300, Z200
Didis Ltd.
Bulgaria, Shumen, 6 Trakia-iztok Street
Phone: +359 54 850 830
e-mails: home.market@didis-ltd.com;
export@didis-ltd.com
References
- CoolBaby Çocuk Gereçleri – Çocuklar Bizimle Büyüyor
- Lorelli - Baby and children products with proven quality
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>