Kooduu 082 Loome LED Battery Light User Guide
- June 16, 2024
- Kooduu
Table of Contents
Kooduu 082 Loome LED Battery Light
Specifications
| Document Title | Loome Quick Start Guide |
|---|---|
| Version | 1.0 2023 |
Setup Instructions
- Unpack the device and remove the charging base. The illustration shows the device being lifted from its charging base.
- Connect the charging base to a power source. The diagram depicts the charging base connected to a cable, which should be plugged into a power outlet. Red and green indicators, as well as a battery icon, suggest charging status.
- Power on the device. A top-down view of the device shows the power button location, indicated by a red dot.
- Adjust volume or brightness. Side view of the device highlights a sliding control, ranging from ‘OFF’ to ‘100%’, to adjust the volume or brightness levels.
FAQ
How do I charge my Kooduu Loome device?
Place the device on the charging base and connect the base to a power source. Indicator lights will show the charging status.
Where is the power button located?
The power button is located on the top of the device, marked with a red dot.
How can I adjust the volume or brightness on the device?
Use the sliding control on the side of the device to adjust the volume or brightness. Slide from 'OFF' to increase up to '100%'.
What should I do if the device is not charging?
Ensure that the charging base is properly connected to a power source and that the device is correctly positioned on the base. If issues persist, refer to the full user manual or contact support.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>