Pyle PIC8E In-Wall In-Ceiling Speaker System User Manual

Pyle PIC8E In-Wall In-Ceiling Speaker System

Introduction

Welcome to the world of immersive audio with the Pyle PIC8E In-Wall In-Ceiling Speaker System. Designed to bring the cinema and concert experience right into your living room, these speakers are a game-changer for audiophiles and casual listeners alike.

Gone are the days of bulky speakers taking up valuable floor space. With Pyle’s ingeniously designed in-wall/in-ceiling speakers, you can enjoy high- quality sound without the clutter, all while adding a touch of elegance to your décor. Engineered to deliver unmatched sonic performance, these speakers boast a range of features that will elevate your audio listening experience to new heights.

8’’ High Performance In-Wall / In-Ceiling Speakers Dual 2-Way Stereo Speaker System, (300 Watt) (Pair)

Features

• Dual High-Performance Speakers
• In-Wall / In-Ceiling System
• 2-Way Full Range Stereo Sound
• Mounts Flush on Walls or Ceilings
• Poly Cone Full Range Mid-Bass Type
• Pivoting Voice Coil Tweeters
• Adjustable Treble Control Switch
• Integrated Mounting Hardware
• Environmentally Friendly ABS Construction
• Perfect for Custom Installations & Applications

What’s in the Box

• (2) 8’’ -inch Speakers
• Mounting Cut-Out Template

Sizes / Dimensions

• Total Speaker Diameter: 10.6’’ -inches
• Cut-Out Diameter: 9.4’’ inches
• Total Speaker Depth: 3.9’’ -inches
• Mounting Depth: 3.7’’ inches

Technical Specifications

• Power Output: 300 Watt MAX (150 Watt RMS)
• Speaker Type: 8’’ -inch Poly Cone, Mid-Bass
• Tweeter Type: 1’’ -inch Silk Dome, Pivoting
• Adjustable Treble Control (+3dB, 0, -3dB)
• Frequency Response: 35Hz-20kHz
• Sensitivity: 88dB
• Impedance: 8Ohm
• Materials: Engineered ABS, UFLC (Urethane Film Laminated Cloth)
• Single Speaker Weight: 3.3 lbs (-Each)
• Sold as: Pair

Installations Instructions

1. Cut the drywall.
   Note: Always allow at least one-half inch between a wall stud and the speaker cutout or the locking tabs will not be able to swivel into place.

2. Connect the speaker wires to the speaker.

3. Screw down each of the four Phillips head screws.The locking tabs will swivel into place and secure the unit to the rear surface of the drywall. Put in the strips of adhesive to secure the grille.

4. Replace the metal grille.

Specifications

• Speaker Type: 8-inch Poly Cone, Mid-Bass
• Connectivity: Coaxial
• Power Rating: 300-Watt Peak Power
• Frequency Response: 35Hz-20KHz
• Sensitivity: 88Db
• Impedance: 4-8 Ohms
• Product Dimensions: 22.8 x 5 x 11.8 inches
• Item Weight: 3.3 pounds

How To Use

1. Installation: Use the mounting cut-out template provided to mark the spots on the wall or ceiling where you wish to install the speakers.
2. Wiring: Once the holes are cut out, run your speaker wires and connect them to the speaker terminals.
3. Mount the Speakers: Secure the speakers in the cut-out holes using the integrated mounting hardware.
4. Adjust Settings: Use the adjustable treble control to fine-tune your audio output.
5. Test: Turn on the connected audio source to test the speakers.

Care and Maintenance

Cleaning

1. Dusting : Use a soft, dry microfiber cloth to dust off the speakers.
2. Deep Cleaning : For stubborn dirt and stains, use a lightly dampened cloth, but make sure no water seeps into any openings.

Speaker Positioning

1. Ventilation : Ensure that the area around the speaker is well-ventilated to prevent overheating.
2. Weather Protection : These are indoor speakers, so avoid exposing them to extreme temperatures or humidity.

Wiring and Connections

1. Regular Checks : Periodically check for frayed wires or loose connections and address these issues promptly.
2. Cable Management : Keep the cables neatly arranged to prevent tripping and yanking, which could lead to damaged connections.

Firmware Updates

1. Keep the speaker system updated with the latest firmware, if applicable, for optimum performance.

Safety Precaution

Electrical Safety

1. Power Off : Always turn off and unplug the speaker system from the electrical outlet before cleaning or performing maintenance.
2. Short Circuit : Ensure that the speaker wires do not touch each other when the system is powered to avoid short circuits.

Installation

1. Professional Help : For in-wall or in-ceiling installations, it’s highly recommended to get professional assistance to avoid any structural or electrical issues.
2. Tool Safety : If you’re installing the speakers yourself, always follow proper tool safety guidelines.

Children and Pets

1. Choking Hazards : Keep small parts, like screws, out of reach of children and pets.
2. Curiosity Factor : Make sure the speaker system’s wires and components are not easily accessible to children and pets to avoid accidents or damage.

Audio Levels

1. Safe Listening : Avoid exposing yourself to high volume levels for extended periods to prevent hearing damage.
2. Start Low : Always start with the volume low and gradually increase it to a comfortable listening level.

Trubleshooting

No Sound or Low Volume

1. Check the Connections : Make sure all wires and cables are securely connected to the appropriate terminals.
2. Volume Control : Verify that the volume on the connected device (e.g., amplifier, receiver) is set at an audible level.
3. Source Material : Make sure the audio source is working properly. Test with another source if possible.

Distorted Sound

1. Volume Levels : If the volume is too high, it may cause the sound to distort. Try lowering the volume.
2. Check for Obstructions : Make sure there’s nothing obstructing the speaker cones.
3. Audio Format : Make sure the audio format of your source material is compatible with your speaker system.

Speaker Buzzing or Humming

1. Electrical Interference : Ensure the speakers are not close to other electrical devices that could cause interference.
2. Grounding : Make sure all components are properly grounded.

Bluetooth or Connectivity Issues (if applicable)

1. Pairing : Ensure the speaker is in pairing mode and within range of your Bluetooth device.
2. Interference : Other electronic devices can interfere with Bluetooth signals. Move them away and try again.
3. Software Update : Make sure both the speaker and the Bluetooth device have the latest software/firmware.

Radio Reception Problems

1. Antenna : Make sure the antenna (if applicable) is fully extended or properly connected.
2. Location : Try moving the speaker system to different locations to get better reception.
3. Interference : Keep away from other electronic devices that could cause interference.

Remote Control Not Working

1. Battery : Make sure the batteries are fresh and properly inserted.
2. Line of Sight : Ensure there is nothing obstructing the path between the remote and the speaker’s IR sensor.

Speaker Will Not Turn On

1. Power Supply : Make sure the speaker system is plugged into a working electrical outlet.
2. Power Button : Verify that you’ve pressed the power button and any required switches are set to the ‘On’ position.
3. Fuse : Check if your speaker has a user-replaceable fuse that might have blown. If so, replace it with an appropriate fuse as stated in the manual.

If you’re still experiencing issues after attempting these troubleshooting steps, it may be time to consult the user manual for further instructions or contact Pyle customer service for more advanced assistance.

About Pyle

Since the late 20th century, Pyle has been a recognized name in the audio industry, initially specializing in car audio. Over the years, the company has diversified into various sectors, including home audio, professional audio, and marine audio, offering an impressive range of speakers, amplifiers, PA systems, and more. Whether you’re in your car, home, or studio, Pyle aims to provide you with high-quality sound that enriches your audio experience.

VISIT US ONLINE

Have a question? Need service or repair? Want to leave a comment? PyleUSA.com/ContactUs

FAQs

Can I use these speakers for outdoor installations?

The Pyle PIC8E is designed for indoor use. They are not weather-resistant and should not be used outdoors.

Is this a Bluetooth speaker?

No, the Pyle PIC8E is a wired in-wall/in-ceiling speaker system.

Are the speakers sold individually or in pairs?

The Pyle PIC8E is sold in pairs.

Is professional installation required?

While it's possible to install these speakers yourself if you're handy, professional installation is recommended to ensure optimal sound quality and safety.

What's the cut-out dimension for installation?

The cut-out dimensions are 4.13 inches x 11.02 inches.

What is the frequency response range?

The frequency response range is 35Hz-20KHz.

What's the maximum output power?

The maximum output power is 300 watts.

What should I do if there's no sound?

First, check all the wire connections and make sure the amplifier/receiver is turned on and properly set up. Second, ensure that the volume is set at an audible level.

What to do if the sound is distorted?

Check to see if the volume is too high and causing distortion. Also, verify that all the connections are secure.

How do I clean the speaker grilles?

You can gently vacuum the speaker grilles to remove dust or lightly wipe them with a dry cloth.

Are there any special safety precautions?

Make sure to turn off all connected devices and unplug them from the electrical outlet during installation or when making wire connections.

Can the treble control be adjusted?

Yes, the speakers feature adjustable treble control to help deliver a more full, rich sound.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>