PROLED L1307 Wall Washer User Manual
- June 12, 2024
- PROLED
Table of Contents
PROLED L1307 Wall Washer
Product Information
The product is the PROLED WALLWASHER 6 RGBW & WALLWASHER 12 ARC RGB. It is manufactured by MBN GmbH and has the model numbers L1307 and L130900. The product is designed to be energy efficient and has light sources with an energy efficiency class of G. It is suitable for outdoor use with an IP65 safety class rating. The product can be purchased from the manufacturer’s website at www.proled.com.
Product Usage Instructions
- Ensure safety by following these guidelines:
- The product is rated as safety class IP65 and is suitable for standard outdoor environments, but it should not be placed near sea, salt, or acid surroundings.
- Dispose of the packaging in a safe manner.
- If the cable is defective, do not use the luminaire.
- It is recommended to hire a qualified electrician for the installation process.
- Avoid looking directly at the lighted lamp.
- Installation steps:
- Switch off the electricity at the mains before starting any work on the luminaire.
- Mount the luminaire on the wall using the correct dowel and screws.
- Connect the luminaire to a 24 VDC dimmer as per the provided wiring diagram.
- Switch on the main power supply and test the luminaire.
- If you are unsure about these instructions, consult a qualified electrician.
Please note that any modifications made to the luminaire after installation will make the person responsible for the modification liable for any damages caused. It is important to have a qualified electrician complete the installation to ensure compliance with European safety directives.
For further technical information or assistance, refer to the manufacturer’s website at www.proled.com.
Instruction
PROLED WALLWASHER 6 RGBW & WALLWASHER 12 ARC RGB L1307 / L130900
Characteristics:
- LED RGB (Wall washer 12) or RGBW (Wall washer 6)
- Power consumption 32 W (Wall washer 6) or 36 W (Wall washer 12)
- Powder coated aluminum in grey)
- Power supply 24 VDC
- Operating temperature range -10° C till +45° C
- CE compliant with applicable European directives
Warning:
- Safety class IP65 (outside) in standard ambient (not near see, salt or acid surrounding)
- Please ensure that the packaging is disposed of in a safe environment
- If cable is defected, do not use the luminaire
- We do recommend that a qualified electrician should be used to install the products
- Do not look at the lighted lamp directly
Safety indices
Be sure to have a qualified electrician complete installation. The customer is not entitled to claim for any lights installed without observing European safety directives. The manufacturer is then discharged from liability when damage is caused by improper use or installation. If any luminaire is subsequently modified, the person responsible for the modification shall be considered as manufacturer.
Installation
Please follow the sequence of installation step by step. Non-observance can lead to damage of LED.
- Switch off the electricity at the mains before commencing working at the luminaire.
- Mount the to the wall. Use the correct dowel and screws.
- Connect the luminaire to 24 VDC dimmer according to the wiring diagram.
- Switch on back the main power supply and test luminaire.
- If you are in any doubt regarding these instructions, consult a qualified electrician.
Technical details
- Temperated glass T = 7 mm
- IP-class IP65
- IK-rating IK09 620-630 nm
- Green 520-530 nm
- Blue 460-470 nm
- White 5700K – 7000 K
- Supply cable ca. 2m with IP68 4-Pin (RGB) or 7-Pin (RGBW) connector
Energy efficiency class of the light source:
Product listed in this manual contain a light source of energy efficiency
class G. This information relates only to the white light of L1307
Diagram
Connection diagram:
PROLED WALLWASHER 6 RGBW:
PROLED WALLWASHER 12 RGB:
ATTENTION:
- This product counts as „containing product“ according to directive (EU) 2019/2020 and (EU) 2019/2015.
- The light source is part of the containing product. A separation of the light source and the containing product using commonly available tools is possible with this product.
- Replacement of the light source using commonly available tools is possible with this product.
- The light source can be separated for testing purposes.
- Installation and commissioning may only be performed by qualifies persons.
- National installation regulations must be observed.
- Luminaires must be disconnected from mains before any work.
05.23 Technical amendments reserved
MBN GmbH
Balthasar-Schaller-Str. 3
86316 Friedberg
Germany www.proled.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>