PROLED L5202410LD2 Linear Switching Power Supply Dali CV PWM Instruction Manual
- June 12, 2024
- PROLED
Table of Contents
- PROLED L5202410LD2 Linear Switching Power Supply Dali CV PWM
- Product Information
- Specifications
- Product Usage Instructions
- PRODUCT SPECIFICATION
- SPECIFICATIONS
- TECHNICAL DATA DIMENSIONS
- DIMENSIONS
- TYPICAL WIRING DIAGRAM
- USAGE
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
PROLED L5202410LD2 Linear Switching Power Supply Dali CV PWM
Product Information
- Product Name: PROLED LINEAR SWITCHING POWER SUPPLY DALI CV PWM
- Manufacturer: MBN GmbH
- Address: Balthasar-Schaller-Str. 3, 86316 Friedberg, Germany
- Website: www.proled.com
Overview
Thank you for choosing PROLED LINEAR SWITCHING POWER SUPPLY DALI CV PWM.
This product allows you to control constant voltage luminaires with DALI /
DALI2 or PUSH-DIM signal input.
Specifications
- Power supply: Linear switching
- Voltage output: Constant voltage
- Power output: Not specified
- Signal input: DALI / DALI2 or PUSH-DIM
- Ambient temperature: Not specified
- Size: Not specified
- Net weight: Not specified
Typical Wiring Diagram
Please make sure that the correct voltage is used before connecting the
power supply to the luminaire. The product supports both DALI and PUSH-DIM
connections.
Product Usage Instructions
To use the PROLED LINEAR SWITCHING POWER SUPPLY DALI CV PWM, follow these steps:
- Ensure that the power supply is disconnected from the luminaire.
- Verify that the correct voltage is being used for the power supply.
- Choose either the DALI or PUSH-DIM connection method based on your luminaire’s signal input requirements.
- Connect the power supply to the luminaire using the appropriate wiring method based on the chosen connection type.
- Once the connection is established, you can control the luminaires using a switch or other compatible control device.
- The product allows for blackout functionality. Refer to the user manual for specific instructions on how to activate this feature.
Please note that technical amendments may be reserved. For further information or assistance, please refer to the user manual or contact MBN GmbH directly.
PRODUCT SPECIFICATION
OVERVIEW
Thank you for choosing PROLED LINEAR SWITCHING POWER SUPPLY DALI CV PWM.
LINEAR SWITCHING POWER SUPPLY DALI CV PWM allows to control constant voltage
luminaires with DALI / DALI2 or PUSH-DIM signal input.
SPECIFICATIONS
- DALI-Control
- PUSH-DIM-Function trough a switch, which is connected between L- and Switch-connector (see wiring diagram)
- Compatibility with DC-Input 176 – 280 VDC
- Dimming with PWM frequency 20 kHz
TECHNICAL DATA DIMENSIONS
- Power supply: 220-240 VAC, 50/60 Hz
- Voltage output: 24 VDC
- Power output: max. 100 W – 240 W, depending on item
- Signal input: PUSH-DIM, DALI IEC 62386-101 / 102 / 207
- Ambient temperature: -10°~45 °C
- Size: 400 x 33 x 23 (mm) to 450 x 33 x 24 (mm)
- Net weight: 220 gr to 450 gr
DIMENSIONS
TYPICAL WIRING DIAGRAM
Please make sure that correct voltage is used, before power supply is connected to the luminaire. DALI CONNECTION
PUSH-DIM CONNECTION
USAGE
Switch
PUSH-DIM:
- ON/OFF: short press
- Continuously dimming: long press
- With every new long press dimming continue in the opposite direction
- With switching ON and OFF the last value is kept, even in case of power blackout.