Happy Plugs Hope User Manual
- June 12, 2024
- HAPPY PLUGS
Table of Contents
- Happy Plugs Hope
- What’s in the Box
- Quick Start
- CONNECT AND USE
- PAIR TO ADDITIONAL DEVICES
- CALLS
- BUTTON CONTROLS
- CHARGE CASE BUTTON
- How to Reset
- Remote & Media Control
- Multiple Devices
- Supported Devices
- Technical Specifications
- DOWNLOAD
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Happy Plugs Hope
USER MANUAL
What’s in the Box
- 2 x Hope Earphones
- Charge & Storage Case
- Silicone Ear Buds
- USB-C Charging Cable
- Manual & Warranty Information
Quick Start
1. Charge
Before pairing Happy Plugs Hope to your bluetooth enabled device, make sure the Hope charging case has been charged for a couple of minutes.
2. Pair the Earbuds
Open the charge case and keep the earbuds in place to enter pairing mode.
Happy Plugs Hope is now ready to be connected to your bluetooth device.
3. Activate Bluetooth
Go into your device settings and enable Bluetooth. You should find “Happy Plugs – Hope” in the list of available devices.
Pro tip: If your device cannot find your Hope headphones, try repeating the steps above. If still not working, you might need to perform a factory reset. Please refer to How to Reset – Hope on how to reset.
CONNECT AND USE
1. Charge your HOPE for a least 3 minutes before use.
2. Open the charge case and keep the earbuds in place to enter pairing mode.
3. Select “Happy Plugs – Hope” on your phone/device to pair. Your earbuds are
now ready to use.
PAIR TO ADDITIONAL DEVICES
1. With the lid of the charge case open, press the button on the bottom of
the charge case for 5 seconds until the LEDs light up in a rolling motion.
2. Select “Happy Plugs – Hope” on your phone/device to pair. Your earbuds are
now ready to use.
**When you remove your earbuds from the charge case they will automatically connect to the last device you were connected to.
CALLS
When using the HOPE for phone calls, both earbuds are active.
If you wish to use only one earbud during a phone call, please put the other earbud into the charge case and close the lid.
BUTTON CONTROLS
R:
× 1 Play / Pause
× 2 Next Track
× 3 Previous Track
× 1 Call Answer / Call End
× 2 Reject Call
× 3 Accept Call and Hold First Call
2 s Siri / Google Assistant
L:
× 1 Volume Up
× 2 Volume Down
2 s Siri / Google Assistant
CHARGE CASE BUTTON
5 s Earphone Pairing Mode
10 s Reset Earphones
How to Reset
1. Prepare
If you have connected Happy Plugs Hope to your phone or tablet before, go ahead and delete them now from the Bluetooth Settings. Also make sure the Hope charging case has been charged for a couple of minutes.
2. Perform Factory Reset
Place the earbuds in the charging case. With the lid of the charge case open, press and hold the button on the bottom of the charge case for ten (10) seconds until all four (4) LEDs flash five (5) times.
**Happy Plugs Hope is now reset.
3. Pair the Earbuds
Open the charge case and keep the earbuds in place to enter pairing mode.
** Happy Plugs Hope is now ready to be connected to your bluetooth device.
Remote & Media Control
Happy Plugs Hope features full media controls for music, calls and more. For the full overview of commands, see the list below:
Right Earbud
2s Siri / Google Assistant
×1 Play / Pause
×2 Next Track
×3 Previous Track
×1 Call Answer / Call End
×2 Reject Call
×3 Accept Call and Hold First Call
Left Earbud
×1 Volume Up
×2 Volume Down
2s Siri / Google Assistant
Charge Case
5s Earphone Pairing Mode
10s Reset Earphones
Multiple Devices
You can pair the Happy Plugs Hope with up to eight different Bluetooth devices. The earphones stores and remembers these pairings. However, you can only be connected to one device at a time, e.g. play music from one Bluetooth device.
To change from one Bluetooth device to another, disconnect the current Bluetooth connection by switching off Bluetooth at the current device and connect to your second Bluetooth device by selecting the “Happy Plugs – Hope” product entry in the Bluetooth menu.
When you remove your Happy Plugs Hope from the charge case it will automatically connect to the last device you were connected to.
Supported Devices
Identify your Product
Happy Plugs Hope True Wireless Headphones are compatible with any device equipped with Bluetooth – that includes Apple products, as well as Android based devices.
Hope supports Bluetooth 5.0 connection and below.
Don’t forget to activate Bluetooth on your device.
Technical Specifications
CONNECTIVITY
Bluetooth Version: 5.2
BATTERY
Total Playtime: 30h
Standby Time: 80h
Battery for headphones: 45mAh
Battery for Charge Case: 600mAh
Full charge time: 1.5h
AUDIO
Driver Unit: 13mm
Supported Codecs: AAC, SBC
Sensitivity: 119+/- dB
Frequency Response: 20-20k Hz
Impedance: 32Ω
DIMENSIONS & WEIGHT
Size for Charge Case: 65x49x26mm
Weight for Headphones: 3.9 grams
Weight for Charge Case: 46 grams
DOWNLOAD
Happy Plugs Hope User Manual – [Download PDF]
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>