CE LINK SWLCHG310BK 15W Sprout Magnetic Wireless Car Charger User Manual
- June 12, 2024
- CE-LINK
Table of Contents
CE LINK SWLCHG310BK 15W Sprout Magnetic Wireless Car Charger
DEAR CUSTOMER
Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or using this product. Please keep this manual for future reference.
INTRODUCTION
This product is a high-performance wireless charger. This product is suitable for mobile phones, and other productions based on wireless charging 5W /7.5W /10W/. Connect the wireless to a power charger, and then you can charge your device supported wireless charging (mobile phones, etc) by put it on the charger directly .It is helpful in long time journey and convenient for business!
FEATURES
- Transmitting terminal input: 5V3A 9V2A 12V1.67A
- Transmitting terminal output: 5W/7.5W/10W/15W
- Compliant with CE, FCC, standards
- It is light, smart and convenient to use
SPECIFICATIONS
| Input | 5V3A 9V2A 12V1.67A |
|---|---|
| Wireless charging output | 5W 7.5W 10W 15W |
| Switch Frequency | 110K-205K |
| Operating Temperature Range | 0~40°C |
| Storage Temperature Range | -20 ~ 70°C |
| Operation Humidity | 10% ~ 80% RH |
| Storage Humidity | 5% ~ 95% RH |
| Size | 9259.111.5mm |
| Weight | 80±10 g |
PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton:
- Main unit×1
- User Manual×1
OPERATION
Operation Procedures
- Connect the wireless charger with a powered adapter,
Operation Notes
- For optimum performance, please use the wireless charger according to this user manual.
- Please connect the wireless charger to a power adapter which output should be 5V3A or 9V2A or 12V1.67A
- Please unplug the wireless charger after using.
- Do not use the wireless charger with an electronic product which is not in conformity with the specifications, so as to avoid any problem caused by specification mismatching.
- It’s normal that wireless charger will be a little overheated in the use process.
- When the wireless charger stops working under some accidents occurs, you need to check whether the device is compatible with this charger.
- Do not let the wireless charger close to fire, such as stove, candles and etc.
- Do not let the wireless charger soak into liquid, such as swimming pool, bathtub, etc.
- Do not wash the wireless charger with corrosive cleaner.
- If the wireless charger cannot work properly, please contact the store or distributor in your area.
- This device complies with Part 15 of the FCC Rules
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
(2) This device must accept any interference received Including
interference that may cause undesired operation
FCC Warning
This device complies with Part 18 of the FCC Rules.
NOTE: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Refer to FCC Part 18.213(c) and KDB 784748 Anner A section A.5:
(a) Max. Electric Field Emissions: 6.06V/m Max. Magnetic Field Emissions:
0.54A/m
(b) The maintenance of the system is the responsibility of the
manufacturer.
(c) To prevent interference, the product should be as far away from
devices operating at the same frequency as possible.
12. FCC ID : A4X-SWLCHG310BK
CONNECTION DIAGRAM
The Angle operation
Mobile phone put the picture
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>