MUNBYN P941 Logistics Label Printer User Guide
- June 12, 2024
- MUNBYN
Table of Contents
MUNBYN P941 Logistics Label Printer
Product Introduction
What’s in the package?
A Printer
B Adapter
C Quicktips
D USB Cable
E Power Cord
F Labels
G User Manual
- If contents are missing or damaged, please contact us
Printer Overview
Set Up The Printer
Recommended:
Watch the short setup video at: www.munbyn.biz/unboxing
Quick printer connection
- Please follow the sequence of the above picture to operate
Label setup
Automatic label identification:
- Load no less than 4 consecutive labels into the printer.
- After the paper is stable, press and hold feeder button, u nti I you hear a beep.
- Then, the printer will automatically label identification.
Driver installation
For the latest driver, please visit: www.munbyn.biz/94ld
- Please run the downloaded software from the web address indicated above and follow the prompts to complete installation.
Windows Driver Installation
Mac Driver Installation
Pro Tips
- Anytime you change your label, run the automatic label identification.
- Press the feeder button on the printer to skip a blank label.
- To run a self-test, press and hold the feeder button until you hear two short beeps.
- Avoid poor quality labels as they can damage the printer.
- Regularly clean the printer head.
- If the paper is jammed and the red light flashes, run Automatic label identification.
- Insert Munby into the same USB port on your computer every time. This will avoid creating duplicate copies of the printer in your operating system ..
FAQ
FAQ file, please visit: www.munbyn.biz/94lfaq
LED Status
| Light | Description | Troubleshoot |
|---|---|---|
| Green | Normal operation | / |
| Flashing Red (every 2 seconds) | Label paper is not identified | Run |
automatic label identification
Flashing Red (every second)| Cover is not closed| Check that the cover is
completely closed
Flashing Green and Red| Printer head is overheated| Printer will
automatically resume once the printer head has cooled down
Feeder Button Instruction
| Printer status | Feeder button | Function |
|---|---|---|
| Printing | Press the button | Pause printing |
| Standby | Press and hold on until you hear one beep | Automatic label |
identification
Standby| Press and hold on until you hear five beeps| Reset Printer
Specification
| Method | Direct Thermal |
|---|---|
| Resolution | 203dpi |
| Max Printing Speed | 750 mm/s |
| PaperWidth | 40-770 mm (7.57-4.3 inches) |
| Paper Thickness | 0.06-0.25 mm |
| Power Adapter | 24V/2A |
| Printing Life | TPH700Km |
| Operating Environment | Temperature: -70 to 50 °C Humidity: 70-90% (non |
condensing)
Storage Environment| Temperature: -40 to 80 °C Humidity: 5-95% (non
condensing)
Connection| USB
Weight| 7.90 lbs/ 0.9kg
Dimensions| D798 mm W 96mm H 709 mm
Safety Notices
- The printer head can become very hot after printing labels. Do not touch the printer head.
- Do not bend the power cord excessively or place objects on the cord.
- Do not use the printer if you find any irregularities as these could result in fire or electrocution.
- Keep the printer out of reach of children.
- Use only approved accessories and do not try to disassemble, repair the unit by yourself.
- Keep the printer away from water and other objects that could penetrate the components.
- Please unplug the printer when it is not in use for long periods.
Tech Support
WhatsApp +86178178B1067
|
FB message Munby official
E-mail: support@munbyn.com
Whatsapp: +8677817881067
Phone: + l 403 4771911
Skype: Munby
Support time:
Monday to Friday24 hours.
MUNBYN provides 78 months warranty and lifetime free service.
If you encounter any issues with the product, please
contact the MUNBYN team to promptly receive troubleshooting
tips or a replacement.
Website: www.munbyn.com
(how-to videos, warranty details)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>