EDISON nano T265+ Digital Terrestrial and Cable HDMI Dongle Receiver Installation Guide

EDISION nano T265+ Digital Terrestrial and Cable HDMI Dongle Receiver

Installation Guide

Congratulations on purchasing an EDISΙON nano T265+

Please note that this information is valid at the time of publication.
Current information and detailed user manuals can be found on the Internet at: www.edision.gr

Unpacking

Receiver nano T265+
Note: The scope of delivery may also include parts not listed here.

Package Contents

1. Receiver
2. IR Remote Control 2in1
3. USB cable type-Y
4. HDMI extension cable
5. IR cable
6. SMA to IEC adaptor
7. 1 x Cable tie
8. 2 x «ΑΑΑ» batteries
9. Mini Manual GR/EN/DE/ES/IT/FR

Connections

1. HDMI: Connection to an HDTV quality TV
2. / USB: Connection for USB storage devices & Powering (DC 5V) via TV USB port
3. Infrared sensor for the reception of remote control commands
4. ANT IN: Input for connecting to terrestrial or cable signal from the antenna via SMA to IEC adaptor

Connecting and switching on

Note: For trouble-free signal reception your antenna and cable installation should be calibrated and inspected by a qualified professional with a digital TV-level-measuring instrument.

• Connect the receiver using HDMI extension cable via the HDMI port to your TV’s HDMI input port
• Then connect the coaxial cable via SMA to IEC adaptor with the terrestrial or cable signal to the ANT IN input of the receiver.
• Connect the Jack to IR cable to the IR IN port to control the STB with the Remote Control unit.
• Insert the batteries into the remote control. Notes on the remote control can be found on the back of these instructions.
• For STB powering (DC 5V) via TV USB port, connect the USB cable type-Y to the USB port of the STB and to the USB port on the TV.
• The receiver starts with the BOOT process and is operational with in a short time.

For information about EDISION Hardware or Software matters, please contact support@edision.gr or visit the DOWNLOAD CENTER: https://www.edision.gr/en/support

The CE certificate of the product is available on our webpage, by visiting this link: https://www.edision.gr/en/support

Remote Control UNIVERSAL REMOTE CONTROL 2in1

EDISION UNIVERSAL REMOTE CONTROL 2in1 is compatible with all EDISION STB’s*, plus it is pre-programmed with 4 basic functions for SAMSUNG & LG** tv sets. Alternatively, you can program its 4 programmable buttons to any 4 functions of your TV.

MANUAL INSTRUCTION FOR LEARN EDISION UNIVERSAL REMOTE CONTROL 2in1

Your set-top-box remote control has 4 learning-function keys, in the up right hand side TV keypad panel area. Each one can be used accordingly as the following example:

1. Turning your TV set ON/OFF [SET]
2. Increasing/decreasing volume [VOL+ , VOL-]
3. Switching between TV/AV mode [TV/AV]

The other 39 keys are for the control of the EDISION set-top-box.

SET UP FOR LEARNING FUNCTION

• Press [SET] key in the up right hand side TV keypad panel area continuously for 5 Sec. until the LED lights up and keep lighting, then release the key. This means the remote control is in the learning mode.
• Within 10 seconds, press the key in the original TV IR control, which needs to be learned, for example the [POWER] key, then the red LED is flashing. It means this button is ready to receive the learning signal.
• Aim the emission port of the original TV remote control at the front at the emission port at the front of your set-top box remote control (distance between these two ports has to be about 2~3 CM).
• Then press the key which is to be learned in your original TV remote control, for example the [POWER] key of your original TV remote control continuously for 3 seconds. If the red LED flashes quickly for three times and keep lighting, it means the set-top box remote control has succeeded in receiving the signal and you have completed the learning procedure of ON/OFF [TV POWER] key.
• Then release the [POWER] key of your original TV remote control.

If the copying procedure fails , the red LED will blink and stay OFF. In this case please repeat the procedure.
For the next programmable function, please repeat steps 1 to 2:

• witching between TV/AV mode [TV/AV]
• Increasing/decreasing volume [VOL+ , VOL-]

Now you can operate your TV with the 4 programmed by you keys of your set-top box remote control.
During the operation, the LED will flash to indicate that the signal is transmitted!

• For EDISION STB compatibility, please visit our webpage
  **LG & SAMSUNG are brand names that belong solely to LG Electronics Inc. and Samsung Electronics Co., Ltd respectively. Any brand name reference in this text is only for informational purposes towards the consumer that is interested in the product.

Visit us on:
www.edision.gr

EDISION HELLAS LTD • FARMAKEIKA – 57001 N. RISIO • THESSALONIKI – GREECE

Documents / Resources

| EDISON nano T265+ Digital Terrestrial and Cable HDMI Dongle Receiver [pdf] Installation Guide
nano T265 Digital Terrestrial and Cable HDMI Dongle Receiver, nano T265, Digital Terrestrial and Cable HDMI Dongle Receiver, Terrestrial and Cable HDMI Dongle Receiver, Cable HDMI Dongle Receiver, HDMI Dongle Receiver, Dongle Receiver, Receiver
---|---

References

• Edision Hellas
• Solutions & Support / Download Center

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>