PHANTEKS PH-CBKT-CO-BK01 Revolt Cable Kit User Manual
- June 12, 2024
- PHANTEKS
Table of Contents
CABLE KIT
CABLE OVERVIEW:
MOTHERBOARD 24-PIN
Sleeved 16-AWG motherboard cable with 3x aluminum combs
CPU EPS 4+4-PIN
Sleeved 16-AWG CPU cable with 2x aluminum combs
PCIe 6+2-PIN
Sleeved 16-AWG CPU cable with 3x aluminum combs
PCIe GEN5 12VHPWR
Sleeved 16-AWG GPU cable with 5x aluminum combs
SATA
18-AWG SATA cable 4x Sata Connectors
SATA | MOLEX
18-AWG SATA and Molex cable 2x Sata and 2x Molex connectors
THIS MANUAL SUPPORTS:
PH-CBKT-CO_BK01
PH-CBKT-CO_WT01
PH-CBKT-G5S_BK01
PH-CBKT-G5S_WT01
Phanteks will not take responsibility for any damages incurred due to
incorrect installation or usage of this product. This product is intended for
use with the Phanteks Revolt ATX power supplies.
For an up-to-date compatibility list, check
www.phanteks.com
CABLE QUANTITY
Cable|
PCIe GEN5 Starter Set
|
Complete Set
---|---|---
Motherboard 24-PIN|
1
|
1
CPU 4+4-PIN|
2
|
2
PCIe 6+2-PIN|
0
|
7
PCIE GEN5 12VHPWR|
1
|
2
SATA|
2 (flat ribbon cable)
|
3 (sleeved)
SATA | MOLEX|
2 (flat ribbon cable)
|
3 (sleeved)
MANUAL
01 CONNECT YOUR CABLES
The cables can have a different connection on either end. Follow this overview to connect the cable to the correct port and component.
- MOTHERBOARD 24-PIN
- PCIe 6+2-PIN
- CPU EPS 4+4-PIN
- PCIe GEN5 12VHPWR CABLE
- SATA
- MOLEX
Connect the cables to the Revolt power supply:
- MOTHERBOARD 10+18-PIN
- CPU | PCIe 8-PIN
- SATA | MOLEX 6-PIN
- PCIE GEN5 12VHPWR
02 PCIE GEN5 GPU CONNECTOR
The PCIe Gen5 (12VHPWR) GPU connector can deliver up to 600 watts to the GPU.
Make sure it is fully seated and clicked in to prevent any damage to your
system.
Note that a compatible GPU is required.
PCIe GEN5
12VHPWR CABLE
ATTENTION
Ensure the connector is FULLY SEATED.
03 CONNECT POWER CABLE
Connect the power cable to the power supply and a grounded power outlet respectively. Make sure the power supply is turned off ` O ‘ before connecting it to a power outlet.
The Power Cable is included with the power supply.
04 BE SAFE!
Switch the power button to the **I** ‘ position to turn on your system. When making any changes to the hardware, be sure that the power button is switched from the I ‘ to the ` O ‘ position so the power supply is turned
off.
FOLLOW US ON
SOCIAL MEDIA
Instagram Phanteks
Facebook Phanteks
YouTube Phanteks
Twitter @phanteks
SUPPORT
US & Canada
support@phanteksusa.com
International
support@phanteks.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>