AXIS XPQ1785 Explosion Protected PTZ Camera Installation Guide

: June 4, 2024
: AXIS

Table of Contents

AXIS XPQ1785 Explosion Protected PTZ Camera
Safety instructions
Transportation
Packge Inside
- TOOLS REQUIRED
HOW WE FIX IT?
DIMENSIONS REQUIRED
Assembling
CABLES CONNECTIVETIY
Plug in
FIXATION
Connectivity with computer
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AXIS XPQ1785 Explosion Protected PTZ Camera

AXIS XPQ1785 Explosion Protected PTZ Camera PRODUCT

Electromagnetic compatibility (EMC)
This equipment has been designed and tested to fulfill applicable standards for Radio frequency emission when installed according to the instructions and used in its intended environment. Immunity to electrical and electromagnetic phenomena when installed according to the instructions and used in its intended environment.

USA
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference,and this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested using a shielded network cable (STP) and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
The product shall be connected using a shielded network cable (STP) that is properly grounded.

Contact information
Axis Communications Inc. 300 Apollo Drive Chelmsford, MA 01824

United States of America
Tel: +1 978 614 2000

Canada
This digital apparatus complies with CAN ICES-3 (Class A). The product shall be connected using a shielded network cable (STP) that is properly grounded.

Europe
This digital equipment fulfills the requirements for RF emission according to the Class A limit of EN 55032. The product shall be connected using a shielded network cable STP that is properly grounded.

Notice
This is a Class A product In a domestic environment.

Contact information Axis Communications AB
Granden 1 223 69 Lund

Sweden
Tel: +46 46 272 18 00
Fax: +46 46 13 61 30 axis.com

Warranty information
For information about Axis’ product warranty and thereto related information, go to axis.com/warranty. Support Should you require any technical assistance, please contact your Axis reseller. If your questions cannot be answered immediately, your reseller will forward your queries through the appropriate channels to ensure a rapid response. If you are connected to the Internet you can download user documentation and software updates find answers to resolved problems in the FAQ database, search by product, category, or phrase report problems to Axis support staff by logging in to your private support area chat with Axis support staff visit Axis Support at axis.com/support

Learn more
Visit Axis learning center axis.com/learning for useful trainings webinars tutorials and guides.

Safety instructions

WARNING
The Axis product shall be installed by a trained professional, and in compliance with local laws and regulations.

NOTICE

The Axis product shall be used in compliance with local laws and regulations.
Store the Axis product in a dry and ventilated environment.
Avoid exposing the Axis product to shocks or heavy pressure.
Do not install the product on unstable poles, brackets, surfaces or walls.
Use only applicable tools when installing the Axis product.
Using excessive force with power tools could cause damage to the product.
Use only accessories that comply with the technical specification of your product.
These can be provided by Axis or a third party. Axis recommends using Axis power source equipment compatible with your product.
Use only spare parts provided by or recommended by Axis.
Do not attempt to repair the product yourself.
Contact Axis support or your Axis reseller for service matters.
The power supply shall be plugged in to a socket outlet installed near the product and shall be easily accessible.
Use a limited power source (LPS) with a rated output power limited to ≤100 W and a rated output current limited to ≤5 A.