SmartGen ATA600 Dual Power Switch Adapter User Manual
- June 12, 2024
- SmartGen
Table of Contents
SmartGen ATA600 Dual Power Switch Adapter
Product Information
The ATA600 Dual Power Switch Adaptor is a convenient adapter designed to connect the HAT600/HAT600N/HAT600P/HAT700 dual power ATS controller and smart breaker. It reduces the need for field wiring and provides labor-saving, time- saving, and reliable connections.
The product is suitable for 3Ph 4W AC systems and features two integrated 400V/50Hz/10A circuits of air breakers. These breakers can be individually used to connect two circuits of AC power. The adaptor is all-in-one integrated and can simultaneously connect S1 breaker and S2 breaker. It is compatible with HAT600/HAT600N/HAT600P/HAT700 dual power ATS controllers. The adaptor is made of cold-rolled plate closure and is fixed using 4 screws.
Product Usage Instructions
Panel Description
The panel illustration can be found in Figure 1. There are two circuits of air breakers, which need to be connected separately with S1/S2 AC power. Connector M1, M2, M3 should be connected to the side of HAT600/HAT600N/HAT600P/HAT700 controller. Connector S1-A, S1-B should be connected to the side of S1 breaker, and Connector S2-A, S2-B should be connected to the side of S2 breaker.
Connector Illustration
The pin numbers of the connector terminals are shown in Figure 2. The wiring details of the connectors can be found in Table 3.
Connector Wiring Illustration
The wiring details for the connectors are provided in Table 3.
| Connector No. | Pin No. | Wire No. | Wire Harness No. |
|---|---|---|---|
| M1 | 1 | M-15 | WH600-M-20-RM |
Note: Connector S2-A and S2-B connected wire numbers start with Q2. Others are the same as S1-A and S1-B,connected with WH600-Q2-30-RM. For example, P1 wire number of connector S2-A is Q2-28.
Wire number definition: Q1-1 means wire needs to connect to Terminal 1 of S1 breaker.
Chinese trademark
English trademark
SmartGen — make your generator smart
SmartGen Technology Co., Ltd.
No.28 Jinsuo Road, Zhengzhou, Henan Province, China
Tel: +86-371-67988888/67981888/67992951
+86-371-67981000(overseas)
Fax: +86-371-67992952
Email: sales@smartgen.cn
Web: www.smartgen.com.cn
www.smartgen.cn
All rights reserved. No part of this publication may be reproduced in any
material form (including photocopying or storing in any medium by electronic
means or other) without the written permission of the copyright holder.
Applications for the copyright holder’s written permission to reproduce any
part of this publication should be addressed to SmartGen Technology at the
address above.
Any reference to trademarked product names used within this publication is
owned by their respective companies.
SmartGen Technology reserves the right to change the contents of this document
without prior notice.
Table 1 Software Version
| Date | Version | Note |
|---|---|---|
| 2019-12-30 | 1.0 | Original Release |
| 2021-02-25 | 1.1 | Add illustration for optional terminals. |
OVERVIEW
ATA600 Dual Power Switch Adapter is a kind of adapter which makes convenience for connection between HAT600/HAT600N/HAT600P/HAT700 dual power ATS controller and smart breaker, reducing a lot of field wiring work for users, not only labor saving, time saving but also reliable.
PERFORMANCE AND CHARACTERISTICS
- Suitable for 3Ph 4W AC system;
- Two integrated 400V/50Hz/10A circuits of air breaker, which are individually used to connect two circuits of AC power;
- All-in-one integrated adaptor, which can simultaneously connect S1 breaker, and S2 breaker;
- Suitable for HAT600/HAT600N/HAT600P/HAT700 dual power ATS controller;
- Cold rolled plate closure;
- With screw installation method, adapter is fixed by 4 screws.
SPECIFICATION
Table 2 Performance Parameters
| Item | Description |
|---|---|
| Rated Working Voltage | AC 400V 50/60Hz |
| Max Working Current | 10A |
| Air Breaker | 400V~ 50Hz 10A |
| Case Dimensions | 144.4mmx252mmx75.3mm |
| Working Conditions | Temperature: (-25~+70)°C Humidity: (20~93)%RH |
| Storage Condition | Temperature: (-30~+80)°C |
| Insulation Strength | Apply AC1.5kV voltage between high voltage terminal and |
low
voltage terminal and the leakage current is not more than 3mA within 1min.
Weight| 1.6kg
PANEL DESCRIPTION
PANEL ILLUSTRATION
Panel illustration is as Fig. 1.
Two circuits of air breaker, connect separately with S1/S2 AC power.
-
Connector M1, M2, M3 need to connect to the side of HAT 600/HAT600N/HAT600P/HAT700 controller.
-
Connector S1
A, S1 B need to connect to the side of S1 breaker. -
Connector S2
A, S2 B need to connect to the side of S2 breaker.
CONNECTOR ILLUSTRATI ON
The pin numbers of connector terminals are as Fig. 2.
Terminal Wirings of connector is as Table 3.
Table 3 Connector Wiring Illustration
Connector
No.
| Pin
No.
| Wire
No.
| Wire Harness No.| Connector
No.
| Pin
No.
| Wire
No.
| Wire Harness No.
---|---|---|---|---|---|---|---
M1
| 1| M-15|
WH600-M-20-RM
|
S1-A
| 1| Q1-28|
WH600-Q1-30-RM
2| M-14| 2| Q1-2
3| M-13| 3| Q1-27
4| M-16| 4| Q1-33
5| NC| 5| Q1-30
6| M-12| 6| Q1-36
7| M-17| 7| Q1-24
8| M-18| 8| Q1-35
9| M-11| 9| Q1-29
M2
| 1| M-4| 10| Q1-32
2| M-28| 11| Q1-1
3| M-5| 12| Q1-25
4| M-8|
S1-B
| 1| NC
5| M-1| 2| Q1-4
6| M-9| 3| Q1-23
7| M-6| 4| NC
8| M-27| 5| Q1-22
9| M-3| 6| Q1-5
10| M-10| | |
11| M-29| | |
| 12| NC| | | | |
---|---|---|---|---|---|---|---
13| M-7| | | |
14| M-2| | | |
15| M-30| | | |
M3
| 1| M-21| | | |
2| M-22| | | |
3| NC| | | |
4| M-24| | | |
5| M-19| | | |
6| NC| | | |
NOTE: Connector S2-A and S2-B connected wire number starts with Q2;
Others are the same with SI-A, Sl -B, connected
with WH600-Q2-30-RM. For example: P1 wire number of connector S2-A is Q2-28.
Wire number definition:
QI-I
e.g. QI-I means wire needs to connect to Terminal 1 of Sl
Wire harness definition:
APPLICATION DIAGRAM
ACCESSORY ILLUSTRATION
The connect ted wire harness and terminals matched with terminal block of this
product are optional;
Users can make clarification at ordering, note the harness requirements and
breaker type. See Table 4 for details.
Table 4 Optional Accessory Description
| Category | Note |
|---|
Optional Wire Harness
| There are three in total, one of them will be connected to the controller side and the other two will be connected to the circuit breaker side. The length of the
wire harness (unit: m) and the model of the circuit breaker should be indicated when choosing.
Optional
Terminals
| Include the matching terminals and connector terminals.
CASE DIMENSIONS
This adapter is designed by screw installation method, and is fixed by four screws at installation.
ATA600 Dual Power Switch Adaptor User Manual
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>