StarTech Com U01043 3.2 Gen 1 5Gbps Active Cable with 4-Port USB Hub User Guide

: June 12, 2024
: StarTech com

Table of Contents

Package Contents
Installation
Regulatory Compliance
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

StarTech Com U01043 3.2 Gen 1 5Gbps Active Cable with 4-Port USB Hub User Guide

Product Diagram (U01043-USB-EXTENDER)

Front View

Front View

Rear View

Rear View

Component	Function
1 4x USB-A Peripheral Ports

Connect USB-A Peripheral devices
USB 3.2 Gen 1 (5 Gbps)
Backward compatible with USB 2.0 and 1.1
Supports up to 5 V and 0.9 A (4.5 W)

2 Power LED|

Indicates if the included Power Adapter or the Host Computer is supplying power
Solid Green = Power
Off = No Power

3 USB-A Host Cable|

Used to connect the USB Active cable with USB Hub to a Host Computer

4 DC Power Port|

Connect the USB Active cable with USB Hub to a Power Source using the included Power Adapter
Recommended 5 V and 4 A

Package Contents

USB Active Cable with USB Hub x 1
Power Adapter x 1
Quick-Start Guide x 1

Requirements
For the latest manuals, product information, technical specifications, and declarations of conformance, please visit: www.StarTech.com/U01043-USB- EXTENDER

Computer with a USB-A Port
USB peripheral device with required USB-A cables

Warnings!
Read the entire Quick-Start Guide and ensure the instructions are fully understood before using this product.

Never operate this product if parts are missing or damaged

Installation

Connect the USB-A Host Cable to a USB-A Port on the Host Computer. No drivers are needed for the USB active cable with USB hub.
Connect the Power Adapter to a Power Outlet and into the DC Power Port of the USB Active cable with USB Hub.
Connect a USB Peripheral Device to any of the four USB-A Peripheral Ports. Some USB peripheral devices may need drivers to finish their installation.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of thirdparty companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Warranty Information
This product is backed by a two-year warranty. For further information on product warranty terms and conditions, please refer to www.startech.com/warranty. Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

Regulatory Compliance

FCC – Part 15
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by StarTech.com could void the user’s authority to operate the equipment. Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

StarTech.com

Ltd.