ACEFAST D10 Fast Wireless Charger Car Mount Holder User Manual

June 9, 2024
ACEFAST

ACEFAST D10 Fast Wireless Charger Car Mount Holder

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.
www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

Product picture

ACEFAST-D10-Fast-Wireless-Charger-Car-Mount-Holder-
fig-1ACEFAST-D10-Fast-Wireless-
Charger-Car-Mount-Holder-fig-2

Operating Instructions

Operation steps of the center console holder:ACEFAST-D10-Fast-Wireless-
Charger-Car-Mount-Holder-fig-2

  1. Use a wipe pack to clean the surface of the center console of the car.
  2. Stick the silicone pad on the surface of the center console of the car
  3. Raise the lever of the center console base, stick the base on the silicone pad, lower the lever of the center console base.
  4. Unscrew the fixing nut behind the back clip, put the universal ball in and then tighten the nut.

Operation steps of the air vent holder:

  1. Unscrew the fixing nut behind the back clip, put the universal ball in and then tighten the nut.
  2. Fix the holder at the air vent. Turn the knob counter clockwise to open the hook clamp, and turn the knob clockwise to lock thehook clamp.

Back clamp operation steps:ACEFAST-D10-Fast-Wireless-Charger-Car-Mount-
Holder-fig-4

  1. Use the USB-C charging cable to connect the car charger to the USB-C port at the bottom of the back clip.
  2. Press the “Press” button on the back of the holder, the back clip arm automatically opens.
  3. Put in the phone in and lock the clamp arm.

Specifications

ACEFAST-D10-Fast-Wireless-Charger-Car-Mount-Holder-
fig-6

Precautions

  • Do not disassemble or modify this product by yourself.
  • Do not place this product in a humid environment.
  • Please do not charge near a heat source.
  • Do not allow water or other liquids to flow into the product, otherwise it will cause damage to the product.
  • Do not install this product in the area where the airbag is located.
  • Do not drop.
  • Do not scratch the surface of this product with sharp objects to avoid surface damage.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.

  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

  • Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
  • Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
  • Natural wear and aging of consumables or components during use (such as batteries, etc.).
  • Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
  • If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

Identification data of the manufacturer’s / importer’s authorized representative: Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
CIN: 27082440

Subject of the declaration:
Title:
PODLE “SEO PREFIX” V LISTOVACÍ TABULCE
Model / Type: Acefast-D10
The above product has been tested in accordance with the standard(s) used to demonstrate compliance with the essential requirements laid down in the Directive(s):
Directive No. 2014/53/EU
Directive No. 2011/65/EU as amended 2015/863/EU
Prague, 8.3. 2022

WEEE
This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals