HTC EULTRA 4G Smart Phone User Guide

HTC EULTRA 4G Smart Phone User Guide

Quick Start Guide

HTC Wildfire E ultra

Thank you for choosing HTC Wildfire E ultra.
See the User Guide to learn how to use the device and find solutions to common problems.

Inside the box:

• Actual configuration on accessories will be different as per different selling region/territory.

Knowing your device

Before using the device, familiarize yourself with its basic operations.

• To power on your device, press and hold the power button for at least 3 seconds until the screen turns on.
• When you turn on your device for the first time, follow the on screen prompts to set it up.
• Press and hold the power button for at least 10 seconds to restart your device.

Getting started

Dual-SIM:

Follow the illustrations and instructions below to set up your device. Please use the eject pin included in the box.

Charging the battery

• Connect the larger end of the USB cable to the power adapter and the smaller end to the Micro-USB port on the smartphone;
• To prolong battery lifespan, use a reliable network connection. Avoid frequently disconnecting the power adapter while charging the battery.

For more information

You can find service hotlines, retailer address, service policies and more information for your HTC Wildfire E ultra at https://www.htc.com
Go to Settings and touch About phone > Legal Information to view legal information about your product.
Go to Settings and touch About phone > FCC ID to view FCC ID information.

∗ All pictures and illustrations in this guide, including but not limited to the device color, size, and display content, are for your reference only. The actual device may vary. Nothing in this guide constitutes a warranty of any kind, expree or implied.

Safety regulations

Before using the device, read the safety information.
Follow the precautions below to prevent dangerous situations.

• Do not insert or remove the SIM card when your device is powered on.
• Do not use cut or modified SIM cards with your devices as these may not be recognized and could damage the card tray(slot).
• Do not use the device in places or premises where the use of mobile phones and radio equipment is not recommended or prohibited by the rules.
• Do not use the device near electronic or medical equipment, because interference may affect device operation.
• Do not use or store the device in dusty places. Dust may cause the device to malfunction;
• Do not use the device with damaged case or accessories.
• Keep the device away from children and pets. Small parts of the device can cause suffocation if swallowed.
• Be careful not to scratch your device or hurt yourself when using the eject pin.
• Do not use the device outdoors during a thunderstorm.
• Do not store the device in high temperatures (near a heater, microwave oven, oven, etc.). An overheated rechargeable battery may cause a fire and explosion.
• Follow all safety precautions and local rules for using mobile devices while driving.
• To avoid damage to your hearing, do not use the headset at maximum volume when listening to music for a long time.
• Use only chargers, rechargeable batteries and other accessories approved by the manufacturer.
• Do not allow the contact of the battery with conductive objects (metal objects, liquids, etc.).
• Do not use the device in places with high humidity (swimming pool, bathroom, etc.), and avoid using the device with wet hands.
• Do not try to open the battery cover by yourself. This may cause battery explosion. Please go to an authorized service center for technical support.
• If your SIM card does not match your device, please contact your carrier.
• High sound pressure

Hearing damage risk
Do not listen at high volume levees for long periods

Transportation and storage conditions

• The packaged smartphone can be transported in any type of closed vehicles at temperatures from + 5 ° C to +40 ° C, protected from direct exposure to precipitation, solar radiation and mechanical damage.

Disposal rules

• Keep in mind that the product or electronic accessories (memory, cable and so on.) cannot be disposed of with other household waste. It is necessary to use special landfills or points for disposal of electronic devices.

Legal Notice

Trademarks and Permissions

HTC and the HTC logo are the trademarks or registered trademarks of HTC Corporation and used under license by
Fortune Ship International Industrial Limited.
Android is a trademark of Google LLC.

LTE is a trademark of ETSI.
The Bluetooth®word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
Wi-Fi®, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are trademarks of Wi-Fi Alliance.
Copyright © 2021 Fortune Ship International Industrial Limited.
All rights reserved.

THIS DOCUMENT IS FOR INFORMATION PURPOSES ONLY, AND DOES NOT CONSTITUTE ANY KIND OF WARRANTIES.

Caution:
Use the Product in the environment with the temperature Between -20ć and 40ć, and Max. charging ambient temperature 35ć; Otherwise, it may damage your product.

For the following equipment:
Product Name: 4G Smart Phone
Model: Wildfire E ultra
Brand Name: HTC
Fortune Ship International Industrial Limited
E-mail: tzhongsheng@waterworld.com.cn

Hereby declares that this [Name: 4G Smart Phone, Model:
Wildfire E ultra] is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.

The equipment was passed. The test was performed according to the following European standards:

The product shall only be connected to a USB interface of version USB2.0 and that the connection to a power USB is
allowed.

Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss.

Adapter shall be installed near the equipment and shall be easily accessible.

Only can use adapter as below:
Adapter Model 1#: TPA-97H0505100VU01
Input: AC100-240V ac, 50/60Hz, 0.15A;
Output: DC5V, 1.0A
SHENZHEN TIANYIN ELECTRONIC CO., LTD

Adapter Model 2#: TPA-185B050100BU01
Input: AC100-240V ac, 50/60Hz, 0.2A
Output: DC5V, 1.0A
SHENZHEN TIANYIN ELECTRONIC CO., LTD

The plug considered as disconnect device of adapter.
This product is intended for sale and application in a business environment.

RED Article 10 2
-This product can be used across EU member states

RED Article 10 10
-The product is class 1 product, No restrictions

The RF distance between body and product is 5mm

2G:
Support Networks: GSM, GPRS, EDGE
Frequency Range: GSM900: Tx: 880-915MHz, Rx: 925-960MHz
DCS1800: Tx: 1710-1785MHz, Rx: 1805-1880MHz

RF Output Power: GSM900: 32.86dBm, GSM1800: 29.93dBm
EDGE900: 26.08dBm
EDGE1800: 25.23dBm

3G:

Support Networks: WCDMA, HSDPA, HSUPA
Frequency Range: WCDMA Band 1: Tx: 1920-1980MHz
Rx: 2110-2170MHz
WCDMA Band 8: Tx: 880-915MHz, Rx: 925-960MHz
RF Output Power: WCDMA Band 1: 22.04dBm, WCDMA Band 8: 22.26dBm

4G:

Support Bands: FDD-LTE Band1, 3, 5, 7, 8, 20
TDD-LTE Band 38, 40
Frequency Range: FDD-LTE Band 1: Tx: 1920-1980MHz
Rx: 2110-2170MHz
FDD-LTE Band 3: Tx: 1710-1785MHz, Rx: 1805-1880MHz
FDD-LTE Band 5: Tx: 824-849MHz, Rx: 869-894MHz
FDD-LTE Band 7: Tx: 2500-2570MHz, Rx: 2620-2690MHz
FDD-LTE Band 8: Tx: 880-915MHz, Rx: 925-960MHz
FDD-LTE Band 20: Tx: 832-862MHz, Rx: 791-821MHz
TDD-LTE Band 38: Tx: 2570-2620MHz, Rx: 2570-2620MHz
TDD-LTE Band 40: Tx: 2300-2400MHz, Rx: 2300-2400MHz
Max.RF Output Power: FDD-LTE Band 1: 24.09dBm
FDD-LTE Band 3: 22.75dBm,
FDD-LTE Band 5: 23.34dBm, FDD-LTE Band 7: 23.30dBm,
FDD-LTE Band 8: 22.73dBm, FDD-LTE Band 20: 23.48dBm,
TDD-LTE Band 38: 23.21dBm,TDD-LTE Band 40: 23.85dBm

Bluetooth:
Bluetooth Version: Bluetooth V4.2
Frequency Range: 2402-2480MHz
Max.RF Output Power: 8.14dBm (EIRP)

Wi-Fi (2.4G):
Support Standards: 802.11b, 802.11g, 802.11n-HT20/40
Frequency Range: 2412-2472MHz for 802.11b/g/n(HT20); 2422-2462MHz for 802.11n(HT40)
Max.RF Output Power: 15.21dBm (EIRP)

GPS

Frequency Range: 1575.42MHz Receiving

FM

Frequency Range: 87.5~108.0MHz Receiving

FCC Radiation Exposure Statement:

This device meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. The SAR limit of USA (FCC) is 1.6 W/kg averaged. Device types: Smartphone (FCC ID˖2AVFE- EULTRA) has also been tested against this SAR limit. SAR information on this and other pad can be viewed onϋline at http://www.fcc.gov/oet/ea/fccid/. Please use the device FCC ID number for search. This device was tested simulation typical 10mm to body. To maintain compliance with FCC RF exposure requirements, use accessories should maintain a separation distance between the user’s bodies mentioned above, use accessories should not contain metallic components in its assembly, the use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be
avoided.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>