OzSpy HJMHDFRAMET10 Photo Frame Camera User Manual

OzSpy HJMHDFRAMET10 Photo Frame Camera

USER MANUAL

HJMHDFRAMET10 SETTIME.txt

• Please ensure that you read the complete user manual carefully before using any part of the product.
• Keep this copy safe for future reference in case of operational difficulties.

General overview

General Introduction

This photo frame camera is especially designed for long-time motion detection and video recording as Max 24 month stand-by upon one full-charge. So user could easily put the camera anywhere for hidden surveillance for moths.

Besides, it has a hidden PIR sensor to catch motion accurately.

As we know, PIR is a best way to detect human moving. Furthermore, there is a hidden huge battery as, which could support Max 24 month stand-by to catch motion.

Main features:

• WORLD’S FIRST! 2 years battery Photo-Frame-Cam
• Easy to change! any picture of 13*18CM
• Super slim! 14mm thickness only
• Hidden PIR/LED! For better invisiblity purpose
• Hidden USB/Button/Switcher! Just like a photo frame,no any screws or socket could be seen
• Standing-on-desk
• Hanging-on-wall supported
• Starlight Technology! Only a few invisible LEDs to record 5-8 meters in evening
• Privacy protection! Audio record could be able/disable as you want

Important Remindings:

• Please read the user manual before using the camera.
• Please test the position/angle, playback the video in advance, to make sure it could catch what you want
• Please do not use this camera for illegal purpose. It is important to follow the laws in your country/state
• We could not be responsible for missing any video record due to wrong operation/Micro-SD problem/camera angle limit

Product accessories

Important notice:

If there is anything missing, please contact us immediately

Product structure

operation:

1. take away the front frame, insert the SD and a photo size 13*18cm;
2. Set the time and date as Page8,
3. Press MD directly and it will enter PIR motion detection mode to Stand-by Max 2 years to catch any motion.

Detection ability

PIR angle 60 degrees
Camera angle 75 degrees
Motion detection distance:5-8 meters

Important Notice:

• While using the camera, it should be placed in a perpendicular direction to those objective people passing by
• Avoid using the camera in hot or extreme temperatures that will lower down motion-detection accuracy
• Once it is switch to MD (PIR MOTION DETECTION MODE), upon each trigger, there will be about 1.8 seconds delay to start video record. Thus, please avoid to use it in somewhere people passing quickly.

Charging information

It is suggested to charge it by a 2A USB power adaptor,with the USB cable in package.

• Once it is low battery, it could not be power on at all, or the red and blue will flash for 10 seconds and power off
• During Charging, the blue and yellow will both stay on. Once it is fully charged, the yellow will be off while the blue stays on.

How to insert and take out Micro-SD card

Important notice:

• The camera has the ability to record video only when Micro-SD is inserted.
• Please avoid by all means to insert or remove Micro-SD when the camera is either powered ON or connected to the computer. This can possibly cause damage to Micro-SD or the entire camera.
• Please ensure that minimal effort is applied to the Micro-SD when inserting it in or out of the camera. Use of force can easily damage the Micro-SD or the product parts.
• Before using the product for the first time, ensure that the Micro-SD is formatted. Please check for any saved data in the Micro-SD to avoid unexpected loss.

We are not liable or responsible for malfunctions that result from failure to follow the above guidelines.

Time and date setting

First, user don’t have to set time/date unless it is necessary. Please follow the bellowing to set time/date

Step 1: Power off the camera, and connect it with PC by the USB cable in the package. Switch the button to REC, after a dozen of seconds, there will be a disk to open. Then please open SETTIME.TXT

Step 2: Please change the numbers/letters

Step3: Disconnect it from PC and power on it. The time settings is done and you will find time&date watermark in the video recordings.

Detailed parameters

Indicator status and meanings

Power on (by hold on power button for 2 seconds)| Normally the blue will stay on.
---|---
If no SD, the blue will flash for 10 seconds and  it powers off.
It powers off after 60 seconds if there is no any operation.
Record continuously (Press REC after powered on)| Press REC, the blue will flash for3 seconds and goes off, it will record automatically for 10 minutes per record file. Or press REC again, the blue will be on, and it save the present video and stops recording.
MD (Press MD after powered on)| Red indicator will always on
In case there is people moving, the bule will flash and goes off and the red stays on. Now it will record the present motion and save to SD
Press MD again, the blue and redwill flash and goes off. And it will save present video, quit MD and power off.
Charging by 2A usb adaptor| The yellow will stay on during charging; once full charged, it will be off.
Power off (By press power button again)| The red and blue will be on for 2 seconds, and it powers off.

IMPORTANT REMINDINGS: PLS DON’T PUT SD OUT DURING RECORDING OR IT COULD POSSIBLY CAUSE DAMAGE TO SD. WHEN THE BATTERY IS RUNNING OUT, IT WILL SAVE THE LAST FILE AND POWER OFF

DOWNLOAD

OzSpy HJMHDFRAMET10 Photo Frame Camera User Manual – [Download PDF]

|Download Time Setting – [HJMHDFRAMET10 SETTIME.txt]

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>