OzSpy HJMHDBOOKT9 HD Book Camera User Manual

: June 12, 2024
: OzSpy

OzSpy HJMHDBOOKT9 HD Book Camera

USER MANUAL

Huge battery camera series

Please ensure that you read the complete user manual carefully before using any part of the product. Keep this copy safe for future reference in case of operational difficulties.

General overview

General Introduction

This book camera is especially designed for long-time motion detection and video recording as Max 24 month stand-by upon one full-charge. So user could easily put the camera anywhere for hidden surveillance for moths.

Besides, it has a hidden PIR sensor to catch motion accurately. As we know, PIR is a best way to detect human moving. Furthermore, there is a hidden huge battery as, which could support Max 24 month stand-by to catch motion.

Main features:

Put-It-There for easily hidden surveillance
Hidden PIR to catch people moving
Hidden battery
Full HD 1080P 30FPS
Audio could be able/disable
3-5 meters night vision

Important Remindings:

Please read the user manual before using the camera.
Please test the position/angle, playback the video in advance, to make sure it could catch what you want
Please do not use this camera for illegal purpose. It is important to follow the laws in your country/state
We could not be responsible for missing any video record due to wrong operation/Micro-SD problem/camera angle limit

Product accessories

Important notice:

If there is anything missing, please contact us immediately

Product structure

Suggested operations:

1. Insert SD and set the time/date before using the camera
2. Directly switch the mode button to MD, which means PIR motion detection. The Max stand by time could be 24 months to catch any motion.

Detection ability

PIR angle 60 degrees

Camera angle 75 degrees
Motion detection distance:5-8 meters

Important Notice:

While using the camera, it should be placed in a perpendicular direction to those objective people passing by
Avoid using the camera in hot or extreme temperatures that will lower down motion-detection accuracy
Once it is switch to MD (PIR MOTION DETECTION MODE), upon each trigger, there will be about 2 seconds delay to start video record. Thus, please avoid to use it in somewhere people passing quickly.

Charging information

It is suggested to charge it by a 2A USB power adaptor,with the USB cable in package.

Once it is low battery, it could not be power on at all, or the red and blue will flash for 10 seconds and power off
During charging please put the power switch to “off”. And the yellow indicator stays on during charging, and it goes off once full charged

How to insert and take out Micro-SD card

Important notice:

The camera has the ability to record video only when Micro-SD is inserted.
Please avoid by all means to insert or remove Micro-SD when the camera is either powered ON or connected to the computer. This can possibly cause damage to Micro-SD or the entire camera.
Please ensure that minimal effort is applied to the Micro-SD when inserting it in or out of the camera. Use of force can easily damage the Micro-SD or the product parts.
Before using the product for the first time, ensure that the Micro-SD is formatted. Please check for any saved data in the Micro-SD to avoid unexpected loss.

We are not liable or responsible for malfunctions that result from failure to follow the above guidelines.

Time and date setting

First, user don’t have to set time/date unless it is necessary. Please follow the bellowing to set time/date

Step 1: Power off the camera, and connect it with PC by the USB cable in the package. Switch the button to REC, after a dozen of seconds, there will be a disk to open. Then please open YW_TIME.txt.

Step 2: Please change the numbers/letters

Step3: Disconnect it from PC and power on it. The time settings is done and you will find time&date watermark in the video recordings.

Detailed parameters

Item	Parameter
size	21154CM
Product net weight	415g
Battery	LiPo
Stand-by power consumption	10uA
PIR detection angle	60 degrees
PIR detection distance	5-8 meters
Camera angle about	75 degrees
Max PIR stand-by time	2 years
Day time recording power consumption	220mA
Max day time recoridng time a b out	30 hours
Night vision recording power consumption	820mA
Max night vision continuously recording time	9-10 hours
Full-Charging time	about 20 hours by 2A USB power adaptor
Resolution	1080P
FPS	30FPS
PIR MD video record	about 1 minute per file
Record continuously a	bout 2 minutes per file
Max SD storage	32GB
Loop recording	optional

Indicator status and meanings

Switch to REC| The blue flash 3 times and goes off, it will record continuously by 2 minutes video each
---|---
Switch to MD| The red and blue flash once, then the red flash 3 times and goes off
Motion detected| The red&blue flash once and red will flash 3 times and goes off. It will save to SD for about each 1 minute video
Low battery| The red and blue will flash for 10 seconds and it powers off。 Or sometimes battery is totally running out, it could not power on at all.
SD full(if it is not auto-recycling)| The red and blue will flash for 10 seconds and it powers off
Charging the camera| The yellow stays on(Suggested to put the switcher to OFF when charging)
Full charged| The yellow be off
Connect with PC as a U-diskWhen connect with PC and power on the camera to either REC or MD| The yellow will stay and the blue&red will flash

IMPORTANT REMINDINGS: PLS DON’T PUT SD OUT DURING RECORDING OR IT COULD POSSIBLY CAUSE DAMAGE TO SD. WHEN THE BATTERY IS RUNNING OUT, IT WILL SAVE THE LAST FILE AND POWER OFF