DATECS BluePad-50 Plus Payment Terminal User Guide
- June 12, 2024
- DATECS
Table of Contents
- REGULATORY
- PREFACE
- CONVENTIONS
- Overview
- Features and Benefits
- Device Specifications
- Device Operation
- GETTING STARTED
- Setup
- Display
- Bluetooth Pairing
- Smart Card Reader Use
- Contactless Card Reading
- Troubleshooting Guidelines
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
DATECS BluePad-50 Plus Payment Terminal User Guide
All rights reserved. No part of the contents of this document may be
reproduced or transmitted in any form without the written permission of
Datecs, Ltd.
The information contained in this document is subject to change without
notice. Although Datecs has attempted to ensure the accuracy of the contents
of this document, this document may include errors or omissions. The examples
and sample programs are for illustration only and may not be suited for your
purpose. You should verify the applicability of any example or sample program
before placing the software into productive use. This document, including
without limitation the examples and software programs, is supplied “As-Is.”
Datecs, the Datecs logo, are registered trademarks of Datecs. Other brand
names or trademarks associated with Datecs’s products and services are
trademarks of Datecs, Ltd. All other brand names and trademarks appearing in
this manual are the property of their respective holders.
Comments? Please e-mail all comments in this document to your local
Datecs Support Team.
REGULATORY
FCC NOTICE
FCC ID: YRW-BP50PLUS
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved
by manufacturer could void your authority to operate this equipment. This
device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Specific Absorption Rate (SAR) information:
This BluePad-50 Plus meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: BluePad-50 Plus has also been tested against this SAR limit. This device was tested for typical body-worn operations with the back of the BluePad-50 Plus kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain an 0mm separation distance between the user’s body and the back of the BluePad-50 Plus. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.
PREFACE
This guide is the primary source of information for setting up and installing BluePad-50 Plus.
Audience
This guide provides simple descriptions of BluePad-50 Plus features, as well as basic information for anyone installing and configuring BluePad-50 Plus.
Organization
This guide is organized as follows:
Chapter 1, Overview. Provides an overview of the BluePad-50 Plus.
Chapter 2, Specifications. Discusses power requirements and dimensions of BluePad-50 Plus, etc
Chapter 3, Setup. Explains setup and installation of BluePad-50 Plus.
This chapter tells how to establish connections with other devices.
Chapter 4, Maintenance and Cleaning. Explains maintenance of BluePad-50 Plus.
Chapter 5, Service and Support. Provides information on contacting your
Datecs representative or service provider and information on how to order
accessories or documentation from Datecs.
Chapter 6, Troubleshooting Guidelines. Provides troubleshooting guidelines should you encounter a problem in terminal installation and configuration.
Related Documentation
To learn more BluePad-50 Plus, refer to the following set of documents:
- BluePad-50 Plus Physical Security Features
- BluePad-50 Plus Firmware API Specifications
- BluePad-50 Plus Software Design Specifications
CONVENTIONS
Various conventions are used to help you quickly identify special formatting.
Table 1 describes these conventions and provides examples of their use.
Table 1 Document Conventions
Overview
This chapter provides a brief description of Datecs’s BluePad-50 Plus device.
BluePad-50 Plus
The BluePad-50 Plus unit is a handheld PIN pad with an integrated smart and contactless card reader an optional Bluetooth module designed to be used with a variety of PDA’s, offering advanced security and smart card processing capabilities.
BluePad-50 Plus supports both symmetric encryption algorithms (DES, 3DES, and
AES) and asymmetric encryption (RSA). This device internally manages
simultaneous multiple keys through either Master Session- or DUKPT-based
processes, and offers high performance smart card processing, as well as
support for the new generation of 3-volt cards.
The BluePad-50 Plus sleek and stylish ergonomic.
Datecs ships variants of BluePad-50 Plus unit for different markets. Your unit may have a different configuration, such as a Bluetooth module, etc. However, the basic processes described in this guide remain the same, regardless of configuration.
Features and Benefits
Exceptional Ease of Use
- Bold, ergonomic design is sleek, stylish, and lightweight for conveniently handing the unit to the consumer for PIN entry.
- Intuitive interface and large, colored control keys simplify training and reduce support requests.
- Highly readable display handles multiple languages.
Critical Security Protection
- Incorporates tamper-detection circuitry to resist unauthorized intrusion and supports a broad spectrum of hardware and software-based security features.
- Integrated security modules simultaneously support sophisticated encryption (AES, DES, 3DES, RSA) and key management schemes, including single and 3DES Master Session, single, and 3DES Derived.
Strong Feature Set
- Primary smart card reader support for synchronous and asynchronous smart cards.
- Support for international character sets and Unicode standard.
- BluePad-50 Plus has received EMV Level 1 approval for smart card solutions.
- BluePad-50 Plus has received EMV Level 2 approval for smart card solutions.
- BluePad-50 Plus has received PCI PTS 5.1 SRED Security Certification.
Device Specifications
Device Operation
- Communication port (USB)
- Contactless reader
- Contactless transaction status LEDs indication
- LCD Display
- On/Off button
- Charging and communication (UART) pads
- Keypad
- Chip card reader
GETTING STARTED
BluePad-50 Plus has rechargeable lithium-ion polymer battery. The battery can be charged from USB power adapter connected to USB port or when is attached to Docking station.
Figure 2
Battery of BluePad-50 Plus is non removable, for replacing please see “Main battery replacement”.
Setup
When a BluePad-50 Plus is switched on and the Power button is kept pressed, on the display will be shown the name and the version of the Secure Boot Loader and the firmware. Service personnel can access two different system modes: “ System Mode ” and “ Application Download Mode”.
SYSTEM MODE
To enter System mode on the BluePad-50 Plus, the button (2) has to be maintained pressed while switching on the PINPAD. A characteristic sound is played and on the display appears the “SYSTEM MODE” menu.
The following keyboard buttons can be used in service mode:
- : move through the list one position upwards
- : move through the list one position downwards
: selection of the active option
: return to previous level or exit the service mode
The following menu options can be selected in service mode:
INFO VERSION
INFO HARDWARE
INFO KEYS
TEST DISPLAY
TEST KEYBOARD
TEST SCR
COMMUNICATION MODE
INFO VERSION
Shows the serial numbers and the versions of the detached program modules:
DEV SN – BluePad-50 Plus serial number
USIP SN – USIP serial number
USIP VER – USIP version
ISBL VER – USIP Boot loader version
HAL VER – USIP Hardware Abstraction Layer (HAL) version
LOAD VER – Secure Boot Loader (SBL) version and name
FW VER – Firmware version and name
PROM VER – Prompts version
APPL VER – Application version and name
PKFA VER – Version of the public key used for firmware authentication
PKAA VER – Version of the public key used for application authentication
PKKA VER – Version of the public key used for manufacturing keys
authentication
INFO HARDWARE
Gives information about the status of the following hardware properties:
BATT: indicates the voltage of the battery
VBUS: indicates if external power supply is plugged in
CHARGE: indicates if the battery is charging
INFO KEYS
Shows the version of the following keys:
AIK keys version
TEST DISPLAY
Performs a display test. Initially a blank screen is displayed. When OK button
is pressed once, completely black screen is displayed. When OK button is
pressed twice, checkmate background is displayed, its contrast can be changed
with the UP and DOWN buttons.
To exit the test at any time the button C has to be pressed.
TEST KEYBOARD
Performs a keyboard test. At first the symbols of all the keys appear on the
display. Pressing a key makes its corresponding symbol to disappear. The test
ends when all the buttons have been pressed.
TEST SCR
Performs smart card reading tests. On the display appears a menu with the
supported options. To perform a test, insert a card in the card slot and
select the corresponding menu option:
- RESET : performs card reset and returns the ATR
- GET CHALLENGE : calls the command GET CHALLENGE and returns a random number
KEYS DOWNLOAD
To download the Acquirer Initial Keys (AIK) the PINPAD has to be set in Keys Download Mode, in which it exchanges information in a secure way through the USB interface using proprietary communication protocol. To exit the mode the “C” button has to be pressed.
CLEAR DEA KEYS
Deletes the customer’s DEA key hierarchy.
EXIT
Exit the service menu forwarding the control to the application.
APPLICATION DOWNLOAD MODE
To enter application download mode on the BluePad-50 Plus, the button (1) has
to be maintained pressed while switching on the PINPAD. A characteristic sound
is played and on the display appears the name and version of the Secure Boot
Loader.
When application download is initiated, on the display is shown the progress
in percentages of the downloading process.
To exit the mode, press or Power buttons.
The Application download process shall not be interrupted to prevent memory
corruption. If the buttons or Power are pressed during the downloading
process, the application integrity checking will fail on booting up and
process will have to be repeated.
COMMUNICATION PARAMETERS
The default USB VC serial port communication parameters are the following:
115200bps
8bit
1 stop bit
no parity
SETTINGS IN APPLICATION(DEPENDS OF THE APPLICATION)
*Default settings
OPERATING MODE
To start Operating mode on the BluePad-50 Plus, quick press the power button.
A characteristic sound is played and on the display appears the clock and
battery status. For entering in “SYSTEM MODE”, need to be pressed button (3)
The following keyboard buttons can be used in System mode:
- : move through the list one position upwards
- : move through the list one position downwards
: selection of the active option
: return to previous level or exit the service mode
Display
The device is equipped with 2” inch color display.
Display Indications
Bluetooth Pairing
Turn on BluePad-50 Plus and Commercial off-the-shelf/smart device with Bluetooth capabilities. In smart device enter to Bluetooth menu and locate BluePad-50 Plus (used Bluetooth name in Air is BluePad-50 Plus serial number). Press on pair and confirm if passkey is same on both devices.
Bluetooth Pairing with Apple device by using “Scan to Pairing”
- Turn on BluePad-50 Plus (hold On/Off button, around ~2sec).
- Run the iOS application, go to the settings “Scan barcode”:
Figure 3
Then the camera of the phone will be activated.
3. Scan the serial number on the label of BluePad-55 with back camera.
4. Then of the screens on both devices will be showed the “Pairing Request”.
5. Please confirm if the passkey is same on both devices.
Update Firmware and Application with using Firmware API
Loaded Firmware and Application on BluePad-50 Plus can be updated via
Application which is using Firmware API. Pair BluePad-50 Plus to another
device via Bluetooth, described on “Bluetooth Pairing”.
Run the Application* on COTS (smart device) and press “Update device
firmware”.
- In order to use the BluePad-50 Plus functions with COTS(smart device), special software must be used. Please contact your distributor in order to get the latest demo application and SDK.
Smart Card Reader Use
The smart card transaction procedure can vary depending on the application loaded on the BluePad-50 Plus. Verify the proper procedure with your application provider before performing a smart card transaction.
To Conduct a Smart Card Transaction
- Position a smart card with the gold contacts facing upward.
- Insert it into the ICC card reader slot in a smooth, continuous motion until it seats firmly.
- Hand BluePad-50 Plus to customer for PIN entry
- Remove the card when the display indicates the transaction is completed.
Leave the smart card in the card reader until the transaction is completed. Premature removal can void the transaction.
Contactless Card Reading
The contactless card transaction procedure can vary depending on the application loaded on the BluePad-50 Plus. Verify the proper procedure with your application provider before performing a contactless card transaction.
In order to use the Contactless card reading function, special software must be used. Please contact your distributor in order to get the latest demo application and SDK.
To Conduct a Contactless Credit/Debit Card Transaction
- Place a contactless card to shown on the BluePad-50 Plus display contactless logo.
- Remove the card when the display indicates the transaction is completed.
Figure 7
Troubleshooting Guidelines
This chapter lists typical examples of malfunction you may encounter while operating your BluePad- 50 Plus unit and steps you can take to resolve them.
The troubleshooting guidelines provided in the following section are included to assist successful installation and configuration of BluePad-50 Plus units. If you are having problems operating your BluePad-50 Plus unit, please read through these troubleshooting examples. If the problem persists even after performing the outlined guidelines or if the problem is not described, contact your local Datecs representative for assistance.
The BluePad-50 Plus unit contains no user-serviceable parts. Do not, under any circumstance, attempt to disassemble the unit. Perform only those adjustments or repairs specified in this guide. For all other services, contact your local Datecs service provider. Service conducted by parties other than authorized Datecs representatives may void any warranty.
Blank Display
When the BluePad-50 Plus unit display does not show correct or clearly readable information:
- Check battery power.
- If the problem persists, contact your local Datecs service provider.
Keypad Does Not Respond
If the keypad does not respond properly:
- Check the display. If it displays is not blank, follow the steps outlined in Transactions Fail To Process.
- If the problem persists, contact your local Datecs representative.
Transactions Fail To Process
There are several possible reasons why the unit may not be processing transactions. Use the following steps to troubleshoot failures.
Check Smart Card Reader
- Perform a test transaction using several different smart cards to ensure the problem is not a defective card.
- Ensure that the card is inserted correctly (see Smart Card Reader Use).
- If the problem persists, contact your local Datecs representative.
Due to risk of shock or damage, do not use the BluePad-50 Plus unit near water, including a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool.
Maintenance and Cleaning
BluePad-50 Plus units have no user-serviceable parts.
To clean the unit, use a clean cloth slightly dampened with water and a drop or two of mild soap. For stubborn stains, use alcohol or an alcohol-based cleaner.
Do not attempt to clean the card readers. Doing so can void any warranty. For card reader service, contact your Datecs distributor or service provider.
Never use thinner, trichloroethylene, or ketone-based solvents – they can deteriorate plastic or rubber parts. Do not spray cleaners or other solutions directly onto the keypad or display.
Main battery replacement
To replace the main battery of BluePad-50 Plus please contact with your your local Datecs representative or service provider.
Safety
- To prevent damage to your device’s parts or internal circuits, do not use it in dusty, smoky, damp, or dirty environments or near magnetic fields.
- Using an unapproved or incompatible power adapter, charger, or battery may damage your device, shorten its lifespan, or cause a fire, explosion, or other hazards.
- Keep the device and battery away from excessive heat and direct sunlight. Do not place them on or in heating devices, such as microwave ovens, stoves, or radiators.
- Dispose the battery, and accessories according to local regulations. They should not be disposed of in normal household waste. Improper battery use may lead to fire, explosion, or other hazards.
- Do not use, store or transport the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or fire.
Service and Support
For BluePad-50 Plus problems, product service, and repair information, contact your local Datecs representative or service provider.
- International – Contact your local Datecs distributor
Service Returns
All customers, please contact your local Datecs Ltd representative or distributor for assistance with your service, return, or replacement.
BLUEPAD-50 PLUS USER GUIDE
UM 07.01.30/v1.3.0
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>