OzSpy HD01 Custom Built Covert Camera User Manual

OzSpy HD01 Custom Built Covert Camera User Manual

INTRO

This system uses state of the art Wi-Fi video module to allow streaming of your video of up to 1080p (depending on your phone’s capability) and back up recordings of 720p to the on-board memory.
All of our custom built systems are handmade and tested to the highest quality standards.
Please read this setup guide carefully to ensure a simple setup and operation of the unit.
Please note there are other advanced features of these units that can be learned about from our full manual.

THE HARDWARE

The hardware used in this system is delicate high sensitivity electronics so we strongly recommend that you do not touch or handle the internal module.
The unit also has a switch which disables the battery. For permanent connection switch battery off. For charging and portable use switch battery on.

DOWNLOAD THE APP

The first step in using these units is to download the apps to your phone.
We recommend downloading the following apps as some phones work better with one and some with the other.
p2pCam Viewer
Sysm-P2P IP Cam
Both apps operate the same so we will only show setup for one.

• Green circle – Play/Pause
• Black circle – SD card slot
• Red circle – Power
• Blue Circle – Micro USB

CONNECTING TO YOUR MOBILE

Once the unit is on scan for the module with your phones Wi-Fi. You will see it appears with a long alphanumeric name similar to this image. Ensure the module is on P2P.

Connect to the device

WATCHING LIVE VIA LOCAL MOBILE TO DEVICE CONNECTION

Once you have connected your mobile and downloaded the apps simply open an app and follow these steps.

• Open App and click LAN

• Select the camera that shows connection and click on it.

• Decide if you want HD, Smooth or Faster video

• You are now connected and streaming video

SETTING UP YOUR PERMANENT WI-FI CONNECTION VIA WI-FI MODEM

Turn on camera and connect to the device as done in “connecting to your mobile” step. Ensure the module has been changed from P2P to IP before turning on (as shown in first picture).

Once connected to your Wi-Fi open the mobile app your using and click on the QR scan and fill in the access code (found on the module) click Login

Click on More

Click on “Wi-Fi” and enter the Wi-Fi you want to connect to along with the password, press OK.

Disconnect from the Wi-Fi on your phone and connect to your phones “Mobile Data”. You are now connected to your camera and you can view a live feed from anywhere using the app on your phone.

N.B Please be sure to reset your camera when changing back to mobile to device connection

ACCESSING RECORDED FILES VIA THE APP (SAME WITH BOTH METHODS)

Click on files to see a list of saved folders with the date the footage was taken.

Once you click on the dated files all images and footage taken on that day will come up.

Whilst in the app you can click on blue arrow to change various settings such as Alarm and System settings.

DOWNLOAD

OzSpy HD01 Custom Built Covert Camera User Manual – [Download PDF]

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>