KU-X900-SDK01 Kubota RTV X900 Falcon Ridge Soft Doors Instruction Manual

June 4, 2024
FALCON RIDGE

KU-X900-SDK01 Kubota RTV X900 Falcon Ridge Soft Doors

KU-X900-SDK01 Kubota RTV X900 Falcon Ridge Soft Doors product-
img

2515 Bypass Rd. Flemingsburg, KY 41041 606-845-7439
Instructions for Installation and Care of Kubota RTV X900 Soft Door Kit
KU-X900-SDK01
Notice : Do not smoke inside the cab or expose the enclosure to direct flames. Cab is Flammable.

Installation Instruction

  1. Be sure to read these instructions thoroughly before opening and installing the Kubota RTV X900 Soft Door Kit. The installation is best done when the temperature is 70 degrees F. or warmer. The temperature affects the adhesive Velcro, if conditions prevent installation in warmer weather it helps to store the adhesive Velcro at room temperature prior to installation.
  2. Carefully open the carton and remove the enclosure on a large flat surface that is clean and free of dirt.
  3. Check over the parts included in the carton with the parts list shown below:
  4. Adhesive Velcro Hook Strips: 20 each————3”
  5. ” ” ” ” 2 each————6″
  6. “ “ “ “ 8 each————8”
  7. “ “ “ “ 2 each————10”
  8. “ “ “ “ 2 each————14”
  9. “ “ “ “ 2 each————17”
  10. Cab Enclosure 2 panels
  11. The top and front of the doors are held in place by double-sided Velcro strips that wrap around the roll cage. At each location you will use a 3″ adhesive Velcro strip placed on the inside of the roll cage to hold it in place. See photos below:KU-X900-SDK01 Kubota RTV X900 Falcon Ridge Soft Doors fig \(1\)
  12. The back of the door has a cutout with a bungee cord across it. This spot has to go around the metal block sticking out the sides of the vehicle. Placing the door here helps line up the rest of the door so all the Velcro goes where they need to.
  13. Now work your way around the door attaching the double-sided Velcro under the windshield and at the top rear corner of the door as shown belowKU-X900-SDK01 Kubota RTV X900 Falcon Ridge Soft Doors fig \(4\)
  14. The next step will be to adhere the 10” and 17” adhesive strips on the exposed roll cage below the cutout with the bungee cord. The picture below show how it should be attached
  15. Next take the 14” adhesive Velcro strips and attach them to the vehicle just under where the roll cage ends down the front. See photo below
  16. Last step is to attach the rear of the door panel directly to the roll cage using 8” adhesive Velcro strips. See photo BelowKU-X900-SDK01 Kubota RTV X900 Falcon Ridge Soft Doors fig \(7\)

Return Policy

If for any reason you choose to return this product it must be returned within 30 days from date item is received. You MUST package the product exactly as it was originally packaged from the factory to get a full refund for the product!
The vinyl windows should never be folded when packaging in the box or for storage purposes. Lay all the windows on top of each other with the canvas folded in between and the paper (if available) on both sides of the windows.
All returned products will be inspected upon arrival at the production facility and must be in unused, factory new condition to receive refund – a 25% restocking fee will apply.
If ordered from Falcon Ridge please call at 606-845-7439 to gain a return authorization number, use our preferred shipping carrier (UPS) to return the item (unless the item is defective, you are responsible for paying the shipping to return the item.) Any returns submitted to Falcon Ridge without a return authorization number will be charged a 20% restocking fee. If ordered from one of Falcon Ridges many distributors’, you must first call them and see what their return policy is. Once your item reaches our production facility, our customer satisfaction team will inspect your item to ensure unused, factory new condition. NOTE: All windshields must be returned with the original protective film intact and not removed. Do NOT REMOVE if you have any intentions of returning the item. Refund/ replacement of a windshield will only be processed on items with original protective film or if the windshield is defective.
Items must be properly packaged in the original shipping carton to protect them during transit and ensure your returned item arrives back factory fresh, and in new resalable condition (any returned items that have been used, altered or damaged in any way will not be subject for a refund.) All contents including instruction manuals, accessories, hardware, Velcro, etc. must be included in your return shipment. Only items in OEM factory new condition will be approved. Once returned items are received, credit will be issued to the original credit card/ payment method used for the purchase. Outbound shipping and return shipping cost will not be refunded. Please allow 4 to 6 weeks for your refund to be processed.

Warranty

To The Owner of this Product:
Thank you for purchasing one of Falcon Ridge Cab Enclosures, Tops &/or Windshields! Below are the terms under which your product is covered under our manufacturer’s warranty.
30 Day Warranty which includes and is not limited to replacing the enclosure, tops and/or windshield due to defect of the product. Please refer to the return policy in this case for more information.
1 Year Warranty includes any defect in material or workmanship within this time frame we will gladly correct the problem or replace the enclosure, tops &/or windshield. Upon submitting for the correction or replacement we will need to receive pictures of the defect in material or workmanship along with the receipt from the date of purchase.
Thank you, Falcon Ridge

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

FALCON RIDGE User Manuals

Related Manuals