Kinderkraft XPEDITION Car Seat User Manual

Kinderkraft XPEDITION Car Seat

Please read this operating manual carefully before first use of the child safety seat. It is your obligation to provide your child with safety, and failure to read this manual may affect it

Child safety seat components

1. Headrest
2. Seat liner
3. Top Tether upper fixing
4. 5-point safety belts buckle
5. ISOFIX fasteners
6. Headrest adjustment handle
7. Shoulder belt guide
8. 5-point safety belts
9. 5-point safety belts adjustment button
10. 5-point safety belt adjustment strap
11.  Seat inclination lever
12. Seat rotation lever
13. Top tether belt guide
14. Hip belt guide
15.  Release key with ISOFIX status indicator
16. ISOFIX movement lever
17. ISOFIX guides

How to use

XPEDITION child safety seat is intended for children in 0+, I, II and III weight groups, that is from birth until they are 36 kg heavy (approximately up to the age of 12).
0+ weight group: 0 kg – 13 kg
The child safety seat must be fixed in the car in a rear-facing position with the use of ISOFIX fasteners and Top tether upper fixing belt. It is necessary to get familiar with the vehicle manufacturer’s operating manual. The child in the safety seat is secured with 5-point safety belts.
I weight group: 9 kg – 18 kg
The child safety seat can be fixed in the car in a forward- or rear-facing position. In case of rear- and forward-facing position, it is necessary to fix the safety seat with the use of ISOFIX fasteners and Top tether upper fixing belt. It is required to get familiar with the vehicle manufacturer’s operating manual. The child in the safety seat is secured with 5-point safety belts.
II weight group: 15 kg – 25 kg
III weight group: 22 kg – 36 kg
With regard to children in II and III weight group (from 15 to 36 kg), 5-point safety belts must be hidden (see point 6.0) and the child must be secured with the use of 3-point safety belts for adults with additional ISOFIX fasteners or just 3-point safety belts for adults, see point 5.3, 5.4. It is necessary to get familiar with the vehicle manufacturer’s operating manual.

Safety instructions

Please spend a few minutes on reading this operating manual in order to provide suitable safety to your child. Many easy-to-avoid injuries arise from reckless and wrong use of the child safety seat.

• IT IS FORBIDDEN TO place the child safety seat on seats supplied with an active front airbag as it may be dangerous. It does not apply to side airbags.
• If the child safety seat is fixed on the front seat, it is necessary to deactivate the airbag. It is advisable to mount the child safety seat on rear seats of the car only. Tips on suitability of the child safety seat for car seat can be found in the car user’s guide.
• It is suitable for installation only when certified vehicles are equipped with three-point safety belts with a retractor which have received a certificate of approval in accordance with UN/ECG regulations no. 16 or other equivalent standards.
• Remember to make sure all belts which fix the child safety seat are tight; 5-point safety belts which restrain the child are adapted to its body and are not twisted.
• The child safety seat must be replaced if subjected to sudden loads during a road accident.
• The child safety seat must not be modified in any way.
• The child safety seat must be secured against direct sunlight; otherwise, hot pieces may burn your child.
• Never leave the child in the seat unattended.
• Make sure luggage and other items are properly secured, in particular the ones on the shelf under rear window as they may cause bodily injuries in case of accident.
• The child safety seat must not be used without its upholstery.
• Do not use replacement upholstery, other than recommended by the manufacturer, as it is an integral part of the child restraint system.
• It is advisable to keep the child safety seat manual throughout its use.
• Do not use other fixing points than described in the manual and marked on the child safety seat.
• All hard elements and plastic parts of the child safety seat must be placed and installed in a way that they cannot get trapped by a sliding seat or vehicle door under normal conditions of use.
• Regularly check the technical condition of 5-point safety belts, pay special attention to fixing points, seams and adjusting elements.
• Stop using the child safety seat if its parts have been damaged or got loose.
• In case of emergency, it is important that you quickly undo safety belts. This means that thebutton which releases 5-point safety belts is not fully secured. Make sure your child does not play with the buckle.
• The back of the child safety seat backrest must rest against the car seat backrest. Make sure the car headrest does not lead to emergence of undesired space between the safety seat backrest and car seat backrest. Some car headrests are an obstacle when assembling the car safety seat and this is why they must be disassembled in the first place.
• Make sure the belt is properly carried in guides. The buckle of the car seat belt must be lower than the belt guide in the child safety seat (the buckle must not touch the guide). In case of doubts, please contact the manufacturer of the child safety seat.
• Always show the child how to behave and fasten seat belts. Also, an adult who is not secured with safety belts may pose a threat to the child.
• Before every car travel, make sure the child safety seat has been properly attached.
• The child safety seat must be secured also when it is not used. Unsecured child safety seat may cause passengers to get injured even in case of emergency braking

How to secure the child

Seat liner

The seat liner improves comfort and provides additional support to very small children. We recommend using a lower and upper part to serve as a child’s head cushion until the child is
5 kg heavy (fig. A.1a). When the child is 5 kg heavy, we advise you to detach the upper part (fig. A.1b). We suggest using an additional seat liner until the child is 12 kg heavy. When the child’s weight exceeds 12 kg, the seat liner must be removed (fig. A.1c).
Remember: The seat liner and protective cushions must be stored in a safe place for future use. NOTE! Use only this original liner – Kinderkraft Xpedition. This liner is intended for use only with Xpedition child safety seat.

Height of headrest and shoulder belts

For 0+ and 1 weight groups, when you use 5-point safety belts to set height of the headrest:

• Simultaneously keep the button which regulates 5-point safety belts (9) and then slacken belts to freely adjust height of the headrest.

• Keep the headrest adjustment handle (6) at the back of the headrest. If you want to lift the headrest, gently pull the handle upwards. Adjust the headrest to the desired height. When you have already adjusted height, release the adjusting handle, the headrest will be locked in a selected position.

• Lower height of the headrest by pressing height adjustment handle (6). When you have already adjusted height, release the adjusting handle and the headrest will be locked in a selected position.
  Place the child safety seat on the car seat. Put the child in the safety seat and check headrest height. To set a suitable height of shoulder belts, make sure the belt enters the safety seat backrest slightly above or at the level of child’s arms. Make sure the shoulder belts fit child’s arms well (fig. A.1.d).
  NOTE! If necessary, re-regulate height of the headrest until you reach an optimal height of shoulder belts.
  For II and III weight groups, when your 5-point safety belts are hidden and you use 3-point safety belts for adults, to set height of the headrest:

• Grab the headrest adjustment handle (6) at the back of the headrest. If you wish to lift the headrest, gently pull the handle upwards. Adjust the headrest to the desired height. When you have already adjusted the height, release the adjusting handle and the headrest will be locked in a selected position.
  NOTE! If necessary, slacken hidden 5-point safety belts to freely adjust height of the headrest.

• Lower height of the headrest by pressing the height adjustment handle. When you have already adjusted height, release the adjusting handle and the headrest will be locked in a selected position.
  NOTE! Remember to gently tighten hidden 5-point safety belts (8) with the adjusting strap until safety belts rest flat on the child safety seat backrest.
  Place the child safety seat on the car seat. Put the child into the safety seat and check height of the headrest. The shoulder belt must go between child’s arm and neck. A correctly positioned headrest assures optimal arrangement of the shoulder part of the car belt and provides the child with protection and comfort (fig. A.1.3).
  NOTE! If necessary, re-regulate height of the headrest until you reach an optimal height.

How to adapt backrest / regulate backrest inclination

• You can change child safety seat inclination angle (fig. A.1.4) with a lever (11). Pull the lever and then slide the seat. Release the lever in a desired position. Gently move the seat until you can hear a clear „click” – the seat has been secured in a specific position.

NOTE! In 0+ and I groups (up to 18kg) with the child safety seat in a rear-facing position, you need to use position „1” – lying (fig. A.1.1).
In I group (9kg-18kg) and II and III groups (15kg – 36kg) with the child safety seat in a forward-facing position, you can use positions from „1” to „4”. (fig. A.1.2).

How to secure the child with 5-point safety belts

• Slacken safety belts by pressing the button (9) and pulling them. Remember! Do not pull shoulder cushions.
• Undo the buckle (4). Place 5-point safety belts on sides of the child safety seat (fig. B.1). Put the child in the child safety seat.
• Adjust the headrest to height of the child (see point 4.1).
• Join both buckle fasteners to engage them and insert in the buckle (4) until you can hear a „click”.

How to fasten 5-point safety belts

• Pull shoulder straps to eliminate free space in the hip section. This way the belt will fit flat.
• Tighten 5-point safety belts with the adjusting strap (10) until the belts are flat on the child’s body and near it. Make sure the shoulder belts properly fit the child’s arms. Correct tension is assured if you can place max. one finger (ca. 1 cm) between the belts and child’s body (fig. A.1.5) in the space between the shoulder belt and child’s chest.
  

NOTE! 5-point safety belts of the hip section must go as low as possible on child’s hips. Make sure the belts are not twisted.

Rotating mechanism

• Installing the child safety seat in a rear-facing position, for children from 0+/I weight group (up to 18kg) in ISOFIX fixing system and Top tether upper fixing belt, to assure functionality of the rotating system and not to block it, please carry the belt of Top tether upper fixing on the internal side of the car (fig. A.1.6, A.1.7).
  

• Rotate the child safety seat with a seat rotation lever (12). This is how you can easily put the child in and take out of the safety seat. IMPORTANT! Remember about order of operations when putting the child in the safety seat. Rotate the safety seat, place the child in, secure it with 5-point safety belt, rotate so that the safety seat is in a rear-facing position. Make sure the rotation function has been correctly secured. To do so, check the color of the indicator by the seat rotation lever (12) – green color means the seat rotation function has been secured. Check if Top tether belt is properly tight; correct tension of the belt is demonstrated by the green color of the indicator (fig. A.1.8).
  

How to mount the child safety seat in the car for particular weight

groups.

How to install in the car

In case of sudden braking or accident, persons who have not fastened their safety belts may cause other passengers to get injured.

Always check if:

• Seat backrests in the car have been secured (i.e., rear seat folding backrest interlock is engaged).
• All heavy items and sharp pieces are secured (e.g., on rear shelf).
• All passengers have fastened their seat belts.
• The child safety seat is always secured, even if the child is not transported.

How to secure the car
Seat covers in some cars may be made of sensitive fabrics on which the child safety seat may leave its tracks. You can avoid them by placing a blanket or towel under the safety seat.

How to install the child safety seat in a rear-facing position, for

children from 0+/I weight groups (up to 18kg) in ISOFIX fixing system and „Top tether” upper fixing belt.

IMPORTANT! The vehicle manual show’s location of ISOFIX fixing points and upper fixing belt as well as other important information on installing the safety seat in the car. The user MUST read the vehicle manual.

• Before installing the child safety seat, please remove the guard from ISOFIX fasteners (if not removed beforehand). To do so, slide ISOFIX release key (15), the system will release the guard which must be removed (fig. A.2.1, A.2.2).
  

• The child safety seat must be placed on the car seat near the backrest.

• Please slide ISOFIX fasteners (5) to their maximum length by unlocking and holding the sliding lever (16) (fig. A.3), and then pulling the fasteners out (fig. A.3.1). The operation must be performed on both sides of the child safety seat.
  

• Attach ISOFIX guides to the seat connectors (fig. A.4a)

• Protruding ISOFIX fasteners must be connected to car seat fasteners until you can hear a distinctive click (fig. A.4b). When the installation is correct, ISOFIX indicator on the button (15) will turn from red into green. Verify correct installation, make sure the indicators are green (fig. A.5).
  

• NOTE! Locking fasteners are properly attached only when both button indicators are fully green.

• When the child safety seat is properly mounted with the use of ISOFIX fasteners, set it in a rear-facing position. Press the seat rotation lever (12) (fig. A.6) and rotate the child safety seat so that its position is rear-facing (fig. A.7). The position is correct when the green color shows up by the seat rotation lever (12).

• After completing operations related to position of the child safety seat, set the child safety seat backrest inclination. Hold the seat inclination lever (11) (fig. A.8) to set position „1” of the safety seat – flat position (fig. A.9).
  

• Adjust the headrest to child’s height (see point 4.1).

• Such child safety seat must be pushed against the car seat by pressing on both sides of the safety seat towards the backrest, so that the child safety seat adheres to the car seat backrest as much as possible (fig. A10). After sliding the car seat for a child against the back seat, grasp the integrated seat base and thus tighten the ISOFIX attachments with left-right movement (Fig. A.10.1). By doing this you make sure that the car seat for a child is securely fastened.

• Grasp the car seat and check that it is securely fastened with no slack. If it moves and the ISOFIX attachments do not extend, repeat the previous steps, check that both ISOFIX indicators are completely green.
  

• There is Top tether upper fixing belt (3) with a hook at the back of the safety seat. Please press the button and pull the adjustment buckle (fig. A.11), release Top tether upper fixing to the suitable length. Top tether must be placed in one of the guides (13) at the back of the safety seat shell (fig. A.1.6, A.1.7).
  
  NOTE! Please get familiar with correct path of Top tether upper fixing belt to keep the safety seat rotation function (see point 4.5).

• Put the belt fixing hook on the car fixing point, as recommended in the car manual.

• To finish with, pull Top tether upper fixing belt, make sure the indicator turns green (fig. A.12). The belt must go under the car seat headrest.
  
  NOTE: Make sure the child safety seat position is correct and stable. Check Top tether upper fixing and make sure the fixing belt has been properly carried.

• Secure the child in the safety seat as showed in point 4.3 and 4.4.

How to install the child safety seat in a forward-facing position, for

children from I weight group (9kg-18-kg) in ISOFIX fixing system and Top tether upper fixing belt.

IMPORTANT! The car manual shows location of ISOFIX fixing points and upper fixing belt as well as other important information on assembly of child safety seat in the car. The user MUST read the vehicle manual.

• Before installing the child safety seat, please remove the guard on ISOFIX fasteners (if not removed beforehand). To do so, slide ISOFIX release key (15), the system will release the guard which must be removed (fig. A.2.1, A.2.2).
• The child safety seat must be placed on the car seat near the backrest.
• Please slide ISOFIX fasteners (5) to their maximum length by unlocking and holding the sliding lever (16) (fig. A.3, A.3.1). The operation must be performed on both sides of the safety seat.
• Attach ISOFIX guides to the seat connectors (fig. A.4a)
• Protruding ISOFIX fasteners must be connected to elements in the car until you can hear a distinctive click (fig. A.4b). After correct assembly of ISOFIX fasteners (5) the indicator on the button (15) will turn from red into green. Make sure indicators are green, it means the installation is correct (fig. A.5).
• NOTE! Locking fasteners are correctly mounted only when both button indicators are fully green.
• When the child safety seat has been properly installed with the use of ISOFIX fasteners (5), set it in a forward-facing position. Press the seat rotation lever (12); (fig. A.6) to rotate the safety seat to the forward-facing position (fig. A.7.1), a correctly secured position is indicated by the green color by the seat rotation lever (12).
• After completing operations related to position of the child safety seat, set the child safety seat backrest inclination by holding the seat inclination lever (11); (fig. A.8), the child safety seat must be set in any position from „1” to „4” (fig. A.9.1).
• NOTE! Any change of backrest inclination while using the safety seat requires you to reset the length of Top tether upper fixing belt.
• Place Top tether upper fixing belt (3) with a hook on the child safety seat headrest.
• Such child safety seat must be pushed against the car seat by pressing on both sides of the safety seat towards the backrest so that the safety seat adheres to the car seat backrest as much as possible (fig. A.10.2). After sliding the car seat for a child against the back seat, grasp the integrated seat base and thus tighten the ISOFIX attachments with left-right movement (Fig. A.10.3). By doing this you make sure that the car seat for a child is securely fastened (Fig. A.10.4).
• Grasp the car seat and check that it is securely fastened with no slack. If it moves and the ISOFIX attachments do not extend, repeat the previous steps, check that both ISOFIX indicators are completely green.
• Press the adjustment buckle release key (fig. A.11) to adapt length of upper fixing belt. The length of the belt must allow putting the hook on the fixing point at the back of the car seat.
• Put the belt fixing hook on the car fixing point, as recommended in the car manual.
• To finish with, tighten Top tether upper fixing belt until you can see a green indicator (fig. A.12). The belt must go under the headrest from the car seat.
• Put the child in the safety seat and adjust the headrest to child’s height (see point 4.1). NOTE: Make sure the position of the child safety seat is fixed and stable. Check Top tether upper fixing and make sure the fixing belt has been properly carried. • Secure the child in the child safety seat as per points 4.3 and 4.4.

How to install the child safety seat in a forward-facing position, for

children from II/III weight groups (15-kg-36 kg) with the use of 3-point car seat belts and additional lower ISOFIX fasteners.

IMPORTANT! The car manual shows location of fixing points and other important information on installation of the child safety seat in the car. The user MUST read the car manual.

• In order to adapt the child safety seat to weight group II/III (15kg-36kg), before installation please hide 5-point safety belts of the child safety seat, follow the point 6.0.
• Before installing the child safety seat, remove the guard from ISOFIX fasteners (unless removed beforehand). To do so, slide ISOFIX release key (16), the system will release the guard which must be removed (fig. A.2.1, A.2.2).
• Place the child safety seat on the car seat, near the backrest.
• Please slide ISOFIX fasteners (5) to their maximum length by unlocking the sliding lever (16) (fig. A.3, A.3.1). This operation must be performed on both sides of the safety seat.
• Attach ISOFIX guides to the seat connectors (fig. A.4a)
• Protruding ISOFIX fasteners must be connected to elements in the car until you can hear a distinctive click (fig. A.4b). When ISOFIX installation is correct, the indicator on the button (15) will turn from red to green. Verify the correct installation, make sure indicators are green (fig. A.5).
• NOTE! Locking fasteners are correctly fixed only when both button indicators are fully green.
• When the child safety seat is properly installed with the use of ISOFIX fasteners (5), set it in a forward-facing position. Press the seat rotation lever (12) (fig. A.6), to rotate the child safety seat in a forward-facing position (fig. A.7.1). The position is correctly secured when you can see a green color by the seat rotation lever (12).
• After you have completed operations related to child safety seat direction, set the safety seat backrest inclination. To do so, hold the seat inclination lever (11) (fig. A.8). The child safety seat must be set in any position from „1” to „4” (fig. A.9.1).
• Such child safety seat must be pushed against the car seat by pressing on both sides of the child safety seat towards the backrest so that the safety seat adheres to the car seat backrest as much as possible (fig. A.10.2). After sliding the car seat for a child against the back seat, grasp the integrated seat base and thus tighten the ISOFIX attachments with left-right movement (Fig. A.10.3). By doing this you make sure that the car seat for a child is securely fastened (Fig. A.10.4).
• Grasp the car seat and check that it is securely fastened with no slack. If it moves and the ISOFIX attachments do not extend, repeat the previous steps, check that both ISOFIX indicators are completely green.
• Put the child in the child safety seat, carry the car seat in front of the child. Fasten the car belt in the buckle, you will hear a distinctive „click”.
• Carry the shoulder belt through the guide (7) under the headrest (fig. A.13).
• The hip belt must be placed in child safety seat guides which are marked with red color on both sides of the seat (14) (fig. A.13).
• Adjust the headrest to the child’s height (see point 4.1).
• Tighten the car seat belt. At first pull the hip belt section and then shoulder belt section. Make sure the hip belt goes as low as possible above child’s hips, fits guide and is secured with a buckle. The shoulder belt must go between child’s arm and neck. Make sure the belt does not pinch the child’s neck.

How to install the child safety seat in a forward-facing position for

children from ll/lll weight groups (15 kg-36 kg) with the use of 3-point car seat belts.

IMPORTANT! The car manual shows location of fixing points and other important information on installation of the child safety seat in the car. The user MUST read the car manual.

• To adapt the child safety seat to weight group II/III (15-36kg), before installation hide 5- point safety belts of the safety seat, follow the point 6.0.
• Place the child safety seat on the car seat, near the backrest.
• Set the child safety seat in a forward-facing position. Press the seat rotation lever (12) (fig. A.6) to rotate the child safety seat in a forward-facing position (fig. A.7.1). The correctly secured position is indicated by the green color by the seat rotation lever (12).
• After completing operations related to child safety seat direction, set the child safety seat backrest inclination. To do so, hold the seat inclination lever (11) (fig. A.8), the child safety seat can be set in any position from „1” to „4” (fig. A.9.1).
• Put the child in the child safety seat, carry the car belt in front of the child. Fasten the car seat belt in the buckle until you can hear a distinctive „click”
•  Carry the shoulder belt through the guide (8) under the headrest (fig. A.13).
• The hip belt must be placed in the child safety seat guides which are marked in red on both sides of the seat (14); (fig. A.13).
• Adjust the headrest to child’s height (see point 4.1).
• Tighten the car seat belt. At first pull the hip belt section and then shoulder belt section.
  Make sure the hip belt goes as low as possible above the child’s hips, fits guide and is secured with a buckle. The shoulder belt must go between the child’s arm and neck. Make sure the belt does not pinch the child’s neck.

How to dismantle the child safety seat (ISOFIX fixing system + Top

tether)\

• To release Top tether upper fixing belt (3), press the button on the buckle (fig. A.11) and slacken the fixing belt. When the belt is sufficiently loose, detach Top tether hook from the fixing point. After completing the above-stated actions, wrap Top tether upper fixing belt.
• Press the release key (15) on both ISOFIX fasteners. Fasteners will be released, and ISOFIX indicator color (15) will turn from green to red. Retract ISOFIX fasteners with the use of a sliding lever (16), slide the base of the child safety seat back in by pressing fasteners towards the safety seat so that they hide in the base. Do the same on both sides of the child safety seat.

How to hide 5-point safety belts and take care of child safety seat.

How to hide 5-point safety belts

• Slacken 5-point safety belts (8) by pressing the button (9) and pulling the belts out of the backrest to reach their maximum length.

• Set the headrest top height with the use of headrest adjustment handle (6).

• Unfasten the buckle (4) to release safety belts and slide them to the side (fig. B.1),

• Detach the fabric cover of the crotch buckle which is Velcro-fastened (fig. B.2), next pull the crotch belt buckle (4) through the bottom of the seat cover.

• The backrest fabric fastens with a press stud. Undo it before you place belts under the covering (fig. B.3).

• In the next step place safety belts with shoulder covers under the backrest fabric on the plastic shell of the child safety seat (fig. B.4).

• Under the seat you can find a soft-foam liner (fig. B.5). Remove it, there is a hard foamed\ polystyrene filling underneath (fig. B.6). Remove the aforesaid filling, and place the secured
  5-point belt buckle there. A correct position of the belts is presented in the figure (B.7).

• After you have placed the buckle in the cavity, put the soft-foam liner back in (fig. B.8).

• NOTE! Remember to tighten 5-point safety belts with an adjustment strap until safety belts lie flat behind the child safety seat backrest fabric.

• Draw the cover over the seat and backrest by securing the cover with press studs (fig. B.9).
  

How to detach/attach the cover

• Before hiding 5-point safety belts, remove shoulder pads (fig. C.1)

• Dismantling the backrest and seat cover: detach four press studs which attach the cover to rear part of the child safety seat backrest (fig. C.2, C.3). Remove the cover from side guards by sliding the fabric off (fig. C.4).

• Gently pull the fabric from both sides of the seat outside the safety seat, slip the cover off the front part of the seat. Remember to pull out the fabric around the belt adjustment button. Such fabric can now be removed from the child safety seat, pull it through the headrest.

• Detaching the cover from headrest: Grab the upper part of the cover behind the headrest height adjustment button and gently slip the fabric off the upper part of the headrest (fig. C.6, C.7). When the fabric from the upper part is removed, start detaching the cover on sides of the headrest.
  
  

In order to attach the cover, do the same in a reversed order.

How to clean

Use the original cover only as it guarantees protection of the child safety seat.
NOTE! Do not use the child safety seat without its cover. Remember to check and clean the safety seat on a regular basis.

• You can remove and wash the cover in a soft powder in a soft-fabric cycle (30°C). Please follow the washing instructions presented on the cover label. If you exceed the temperature of 30°C, colors may fade. Do not spin-dry or dry the cover in the tumbler (it may lead to detachment of fabric layers). The cover must not be exposed to long-term sunlight.
• Plastic pieces can be washed with water and fragmented soap. Do not use aggressive cleaning agents (e.g., solvents).
• Such elements as 5-point safety belts adjustment strap or crotch belt buckle must be checked on a regular basis because they are exposed to accumulation of foreign bodies. These elements can be cleaned with a soft cloth or sponge and warm water.

Guarantee

1. All Kinderkraft products are covered by a 24-month warranty. The warranty period starts from the date the product is handed over to the Buyer.

2. The warranty is only valid in the member states of the European Union, excluding overseas territories (as currently defined, including in particular: Azores, Madeira, Canary Islands, French Overseas Departments, Åland Islands, Athos, Ceuta, Melilla, Helgoland, Büsingen am Hochrhein, Campione d’Italia and Livigno) and the territory of the United Kingdom of Great Britain and Northern Ireland excluding the British Overseas Territories (e.g., Bermuda, Cayman Islands, Falkland Islands).

3. The manufacturer’s warranty does not apply to countries not listed above. The conditions of the additional warranty may be determined by the Seller.

4. In some countries, it is possible to extend the warranty to a limited period of 120 months (10 years).The complete terms and conditions and the warranty extension registration form are available at WWW.KINDERKRAFT.COM

5. The warranty is valid only in the territory indicated in paragraph 2.

6. Claims must be made by completing the form available at WWW.RMA.KINDERKRAFT.COM.

7. The warranty does not cover:
   A. Cosmetic damage, including but not limited to: scratches, dents and cracks in plastic, unless the failure is due to a material or manufacturing defect;
   B. Damage resulting from misuse or poor maintenance – including but not limited to: mechanical damage to products caused by misuse or poor maintenance;
   ◉ Refer to the instructions for use and installation of the product contained in the user manual;
   C. Damage caused by improper assembly, installation or disassembly of products and/or accessories;
   ◉ Refer to the instructions for use and installation of the product contained in theuser manual;
   D. Damage caused by corrosion, mould or rust, resulting from improper maintenance, care and storage;
   E. Damage caused by normal wear and tear or otherwise resulting from the normal passage of time;
   ◉ This includes: tears or punctures in inner tubes; tyre damage; tyre tread damage; fading of fabrics resulting from mechanical use (e.g., on joints and covering of moving parts);
   F. Damage or erosion caused by sun, perspiration, detergents, storage conditions or frequent washing, etc;
   G.Damage caused by accident, abuse, misuse, fire, contact with liquid, earthquake or other external causes;
   H. Products that have been modified to change functionality without 4Kraft’s written consent;
   I. Products from which the serial number or lot number has been removed or tampered with in any way;
   J. Damage caused by the use of third-party components or products – including but not limited to: cup holders, umbrellas, reflectors, bells;
   K. Damage caused by transport or by ground handling service providers.

8. The warranty period for accessories included with the product is 6 months from the date of sale, excluding the faults described above.

9. These warranty conditions are complementary to the Customer’s statutory rights with respect to 4KRAFT sp. z o.o. The warranty does not exclude, limit or suspend the Customer’s rights under warranty for defects in goods sold.

10. The full text of the Terms and Conditions of the Warranty is available on the website WWW.KINDERKRAFT.COM

All rights to the present document belong entirely to 4Kraft Sp. z o.o. Any unauthorized use of them against their purpose, including in particular: using, copying, reproducing, making available – in whole or in part, without the consent of 4Kraft Sp. z o.o. may result in legal consequences.

Available only in selected countries
Details on kinderkraft.com

In the interests of our clients we are at your disposal! if you have a problem with the product you received, contact us in the most convenient way for  you!

kinderkraft.com
 kinderkraftofficial
kinderkraft
kinderkraftofficial
WWW.KINDERKRAFT.COM

References

• RMA
• RMA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>