tp-link kasa EC70 Smart Security Camera User Guide

: August 30, 2024
: tp-link

Table of Contents

kasa EC70 Smart Security Camera
Specifications
Product Information
Appearance Details:
- Product Usage Instructions
Step 1: Download Kasa Smart App
Step 2: Log In
Step 3: Start Setup
Step 4: Configure Camera
Step 5: Place Camera
- FAQ
Q: What should I do if the system LED does not change color as
Q: Can I use any microSD card for recording?

kasa EC70 Smart Security Camera

“`html

Specifications

Product Name: Kasa Spot Pan Tilt, 24/7 Recording
Model Number: EC70
Power Supply Model: T090060-2B1

Product Information

The Kasa Spot Pan Tilt camera features a system LED that changes
color based on its status, a lens, microphone, speaker, micro USB
port, a microSD card slot, and a reset button.

Appearance Details:

System LED: Indicates the camera status.
Lens: Captures images and videos.
Microphone: Built-in internal microphone for
audio recording.
Speaker: Outputs sound from the camera.
Power Port: Connects to the power
adapter.
microSD Card Slot: Insert a microSD card for
recording (card not included).
RESET Button: Used for resetting the
camera.

Product Usage Instructions

Step 1: Download Kasa Smart App

Download the Kasa Smart app from the App Store or Google Play,
or scan the provided QR code.

Step 2: Log In

Open the app and log in with your TP-Link ID. If you don’t have
an account, create one.

Step 3: Start Setup

In the app, tap the button and select Cameras > Kasa Spot Pan
Tilt.

Step 4: Configure Camera

Follow the app instructions to configure your camera and connect
it to your home network.

Step 5: Place Camera

Position the camera on a flat surface or mount it on a
wall/ceiling using the provided indicator label and screws. Use
expansion tubes for wall installation.

FAQ

Q: What should I do if the system LED does not change color as

expected?

A: Try resetting the camera by pressing and holding the RESET
button for 5 seconds until the LED blinks orange and green.

Q: Can I use any microSD card for recording?

A: You can use a microSD card with the Kasa Spot Pan Tilt camera
for recording. Ensure it meets the required specifications.

“`

User Guide
Kasa Spot Pan Tilt, 24/7 Recording EC70

Contents
About This Guide ···················································· 1 Introduction ······························································· 2 Appearance ······························································· 3 Set Up Your Camera·············································· 4 Authentication·························································· 6

About This Guide

This guide provides a brief introduction to the Kasa Spot Pan Tilt and the Kasa Smart app, as well as regulatory information.
Features available in Kasa Smart may vary by model and software version. Kasa Smart availability may also vary by region or ISP. All images, steps, and descriptions in this guide are only examples and may not reflect your actual Kasa Smart experience.

Conventions
In this guide, the following convention is used:

Convention Description

Teal Underline

Key information appears in teal, including management page text such as menus, items, buttons and so on. Hyperlinks are in teal and underlined. You can click to redirect to a website.

More Info
· Specifications can be found on the product page at https://www.tp-link.com. · Our Technical Support and troubleshooting information can be found at https://www.tp-link.com/support/. · A TP-Link Community is provided for you to discuss our products at https://community.tp-link.com. · Frequently Asked Questions (FAQs) can be found at https://www.tp-link.com/support/faq/.

1

Introduction
With the Kasa Spot Pan Tilt connected to your home network, you can get the full picture of any space in your apartment, dorm or home. With a 360° horizontal view and 113° vertical view, the Pan Tilt has everything covered. With Motion Tracking and Patrol Mode, track activity from beginning to end and set multiple distinct viewpoints for your camera to monitor at set intervals.
· Crystal Clear Video Sharp and clear 1080p Full HD provides high-quality video right in the palm of your hand. · Pan and Tilt Swipe up, down, left and right on your phone to rotate and set the camera’s point of view. · Motion Tracking When motion activity is detected, Kasa Spot Pan Tilt tracks and follows the subject to keep it within the camera’s field of view. · Secure Local Storage Save your footage on a microSD card and play back with your Kasa Smart app. · Patrol Mode Set 4 distinct viewpoints and program your pan tilt camera to keep an eye on each region at intervals of your choosing. · Night Vision Even in the dark, the camera has Night Vision up to 30 feet. Never miss a thing at night and still get the same high-quality video you’re used to. · Instant Activity Alerts No need to check your Kasa Spot Pan Tilt throughout the day. Get automatic alerts when it detects motion. Take quick
action when you see your pet on the couch, a roommate walking through your room, or an intruder enter your front door. · Two-Way Audio – Use crisp two- way audio to communicate with nosy roommates, family or even mischievous pets. · Activity Zones – Control what alerts you receive by creating up to 16 custom activity zones, at no charge, around areas that are important to you. · 24/7 Recording – Support continuous video recording with a SD card inserted to your Kasa Spot Pan Tilt.
2

Appearance
Kasa Spot Pan Tilt has a system LED that changes color according to its status, a lens, microphone, speaker, micro USB port, a SD card slot and a RESET button. Refer below for details.

System LED
· Solid orange: Rebooting
· Blinking orange and green: Ready for setup
· Blinking red: Connecting to Wi-Fi
· Blinking green: Connected to Wi-Fi
· Solid green: Connected to the cloud
· Blinking orange: Camera resetting

Micro SD RESET

Lens

Microphone
Built-in internal microphone.
Note: Do NOT insert objects into the hole.

Speaker
The sound comes out of the camera.

Power Port
Connect the power adapter provided.

microSD Card Slot
Insert a microSD card for recording. microSD cad not included.

RESET Button Tilt your camera lens up to find the RESET button.
Press and hold the reset button for 5 seconds until the LED blinks orange and green.

3

Set Up Your Camera
Follow the steps below to get started with your new camera.

Step 1. Download Kasa
Get the Kasa Smart app from the App Store or Google Play, or by scanning the QR code below.

Step 2. Log In
Open the app, and log in with your TP-Link ID. If you don’t have an account, create one first.

Step 3. Start Setup
Tap the button in the Kasa app and select Cameras > Kasa Spot Pan Tilt.

4

Step 4. Configure Camera
Follow app instructions to configure your camera and add it to your home network.

Step 5. Place Camera
Place your camera on a flat surface, or install it on a wall or ceiling with the provided indicator label and mounting screws.
· For soft surface: Directly screw the screws in. · For cement wall: Drill two holes with the help of indicator label, insert the plastic
expansion tubes into holes and screw the mounting screws into the expansion tubes. Diameter of the holes: 6 mm (15/64 in.)

Unit: mm
5

Authentication
FCC compliance information statement
Product Name: Kasa Spot Pan Tilt, 24/7 Recording Model Number: EC70 Component Name Model I.T.E. Power Supply T090060-2B1 Responsible Party: TP-Link USA Corporation Address: 10 Mauchly, Irvine, CA 92618 Website: http://www.tp- link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6804 E-mail: sales.usa@tp- link.com
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
6

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. “To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.”
We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.

FCC compliance information statement Product Name: I.T.E. Power Supply Model Number: T090060-2B1 Responsible Party: TP-Link USA Corporation Address: 10 Mauchly, Irvine, CA 92618 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6804 E-mail: sales.usa@tp-link.com

Issue Date: 2024-07-05

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These

7

limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Issue Date: 2024-07-05
8

NCC Notice

BSMI Notice
· · · · · ·

Kasa Spot Pan Tilt, 24/7 Recording Equipment name

Unit
PCB

Lead (Pb)

Mercury
(Hg)

EC70 Type designation (Type)

Restricted substances and its chemical symbols

Cadmium
(Cd)

Hexavalent chromium
(Cr+6)

Polybrominated
biphenyls (PBB)

Polybrominated diphenyl ethers
(PBDE)

9

—

1. 0.1 wt % 0.01 wt % Note 1″Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 2. Note 2″ ” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 3. Note 3The “” indicates that the restricted substance corresponds to the exemption.

Safety Information
· Keep the device away from water, fire, humidity or hot environments. · Do not attempt to disassemble, repair, or modify the device. · Do not use damaged charger or USB cable to charge the device. · Do not use any other chargers than those recommended · Do not use the device where wireless devices are not allowed. · Adapter shall be installed near the equipment and shall be easily accessible. · Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don’t
hesitate to contact us. · This product uses radios and other components that emit electromagnetic fields. Electromagnetic fields and magnets may interfere with pacemakers
and other implanted medical devices. Always keep the product and its power adapter more than 15 cm (6 inches) away from any pacemakers or other implanted medical devices. If you suspect your product is interfering with your pacemaker or any other implanted medical device, turn off your product and consult your physician for information specific to your medical device. · Operating Temperature: 0 ºC~ 40 ºC (32°F ~ 104°F ) Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

10

Explanation of the symbols on the product label

Symbol

Alternating current

DC voltage

Explanation

Caution

Operator’s manual

Class II equipment

Polarity of output terminals

Energy efficiency Marking
Indoor use only RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.

11

12

13