Sunset Trading DLU-BR-B50-RTA Brook Barstool Instruction Manual
- June 15, 2024
- Sunset Trading
Table of Contents
Sunset Trading DLU-BR-B50-RTA Brook Barstool
Product Information
- Specifications
- SKU: DLU-BR-B50-RTA
- Manufacturer: Sunset Trading
- Address: 701 E Industrial Pk Dr Manchester, NH 03109
- Website: sunsettrading.com.
- Country of Origin: Malaysia
- Assembly Instructions
- Thank you for purchasing this quality product! It has been engineered for easy assembly yet constructed for durability. Please take the time to read and follow the instructions while assembling.
- Step 1: Checking Parts and Contacting Support
- Before starting the assembly process, please make sure you have received all the necessary parts. If any parts are missing or if you have any questions, please contact our customer support team at 877-364-8464 or via email at info@sunsettrading.com.
- Step 2: Assembly
- Please follow the steps below to assemble the product:
- Step 2.1: Back Frame
- Attach the back frame (Part 01) to the seat frame (Part 02) using two hex bolts (Part a – M6 x 80mm) and two flat washers (Part d – 10 41 x 18mm).
- Step 2.2: Front Legs
- Attach the front leg (L) (Part 03) and the front leg (R) (Part 04) to the seat frame using two hex bolts (Part b – M6 x 60mm) for each leg.
- Step 2.3: Front Stretcher
- Attach the front stretcher (Part 05) to the front legs using two hex bolts (Part c – M6 x 40mm).
- Step 2.4: Side Stretchers
- Attach the two side stretchers (Part 06) to the front and back frames using six PHRS screws (Part g – #8 x 1 41).
- FAQ
- Q: What should I do if I’m missing parts?
- A: If you are missing any parts, please contact our customer support team at 877-364-8464 or via email at info@sunsettrading.com. They will assist you in getting the necessary parts.
- Q: Where is this product manufactured?
- A: This product is made in Malaysia.
List of Parts
List of Parts For 1 Set
List of Hardware
List of Hardware For 1 Set
IMPORTANT NOTES
- Keep all hardware and small parts out of reach of children.
- Remove all staples and packing straps before you start to assemble.
- Do not discard main cartons and wrapping material until assembly is complete.
- Check to be sure you have all parts and hardware.
- Place all wooden parts on a clean soft surface to avoid parts from being scratched
- Do not tighten all screws / bolts until completely assembled.
- Check tightness 3x’s/year, with use screws can become loose.
- Do not attempt to repair or modify parts that are broken or defective. Please contact us immediately.
- Enjoy your new furniture!
INSTALLATION STEPS
CONTACT
- 701 E Industrial Pk Dr
- Manchester, NH 03109
- sunsettrading.com
- Please Contact us if you are
- Missing Parts or have any Questions
- 877-364-8464
- info@sunsettrading.com.
Read User Manual Online (PDF format)
Loading......