BLUETTI EP800 Micro Inverter Installation Guide
- July 25, 2024
- Bluetti
Table of Contents
EP800
Micro-inverter Installation
EP800 Micro Inverter
Thank You!
Thank you for making BLUETTI a part of your family.
From the very beginning, BLUETTI has tried to stay true to a sustainable
future through green energy storage solutions while delivering an exceptional
eco-friendly experience for our homes and our world.
That’s why BLUETTI makes its presence in 100+ countries and is trusted by
millions of customers across the globe. Copyright © 2024 Shenzhen PowerOak
Newener Co., Ltd. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by
any means without the prior written consent of Shenzhen PowerOak Newener Co.,
Ltd.
Notice
BLUETTI’s products, services, and features are subject to the agreed-upon
terms and conditions during purchase. Please note that some products,
services, or features described in this manual may not be available under your
purchase contract. Unless otherwise specified in the contract, BLUETTI makes
no representations or warranties of any kind, express or implied, with respect
to the contents of this manual.
The contents of this manual are subject to change without notice. Please get
the latest version from: https://www.bluettipower.com/pages/user-guides
If you have any questions or concerns about this manual, please contact
BLUETTI support for further assistance.
Shenzhen PowerOak Newener Co., Ltd.
F19, BLD No.1, Kaidaer, Tongsha RD No.168, Xili street, Nanshan, Shenzhen,
China
Web: https://www.bluettipower.com
Introduction
Key Features:
- If there is a grid failure or when there is no grid, the micro-inverter disconnects from the grid, allowing the PV system and battery storage to operate independently.
- Use the BLUETTI app to set the micro-inverter’s power rating.
Note:
- Do not use a generator as an input source in AC-coupled or micro-inverter systems.
- The micro-inverter can operate independently without EMS and ATS.
- Use only compatible micro-inverters such as the IQ7.
Note: Not all solar PV inverters are compatible with EP800, please
contact BLUETTI before installation. If you want to use existing solar panels,
please purchase CT and Meter from the official website.
Purchase link:
https://www.bluettipower.com/collections/ep800-ep900-accessories
Electrical Diagrams
Note: The EP800 electrical diagram has no CT on the grid side.
Procedures
Step 1: Wiring
Connect the cables according to the electrical diagrams above.
Step 2: Power on
Press and hold the battery power button to activate the energy storage system.
Refer to the product’s user manual and related materials for detailed
instructions.
Step 3: Micro-inverter Configuration
Access the “Pro Mode” page in the app and set the “Off-Grid AC PV Rated Power”
(the total power of the PV system). Refer to the product’s app user manual for
detailed instructions. Step 4: Initiate
Turn on the “System Switch” to enable the micro-inverter via the app.
Precautions
- The micro-inverter should be used with the meter in the accessories below.
- Don’t activate off-grid micro-inverter and regular AC-coupled applications simultaneously.
Accessories
Part No.| Accessory| Specs| Diagram| Qty.|
Description
---|---|---|---|---|---
29.0101.0150-00| Meter (Optional)| Acrel, AGF-AE-D/200, 208V / 240V, 60Hz,
200A±1%, L1/L2/N/PE, RS485 communication, Single-phase
bidirectional meter (for US version), with 2 200A CTs| | 1| AC-coupled meter
15.1501.000100| CT
(Optional)| Acrel, AKH-0.66-KΦ16W, 150A
/ 5A, 2.5VA, -20°C-70°C, Red/Black
Wires with Terminal Pin, Cable
length: 2m±10cm, 34 × 38 × 50mm| | 2| Replacement for the meter’s CT
Note: The original CT for meter has a size Φ24.
Software Version (minimum required version)
EP800 ESS: ARM502711, DSP502612, PBOX904311, BCU102514.