infobit E150SK 18Gbps HDBaseT Extender (150m) with KVM Function User Manual
- June 12, 2024
- infobit
Table of Contents
18Gbps HDBaseT Extender (150m)
with KVM Function
Model: iTrans E150SK
User Manual
VER 1.0
www.infobitay.com
info@infobitay.com
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully
before connecting, operating or adjusting this product. Please keep this
manual for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged by
electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge
protection systems is highly recommended in order to protect and extend the
life of your equipment.
Introduction
This 18Gbps HDBaseT Extender can extend HDMI signal, bi-directional IR control
signal and USB KVM signal to a distance up to 150m via a single CAT6 cable.
This product converts HDMI signal to standard HDBaseT signal and transmits it
through LAN cable. It can easily control signal source device or display
device from the remote end through bi-directional IR signal passthrough
function. Video resolution up to 4K2K@60Hz YUV 4:4:4. It also supports USB
KVM and POC function.
The extender can be widely used in other fields such as video conference
system, multimedia signal broadcasting, HDMI signal extension, etc.
Features
☆ HDMI2.0b, HDCP 2.2 and USB 1.1 compliant
☆ Support 18Gbps video bandwidth
☆ Support video resolution up to 4K2K@60Hz YUV 4:4:4
☆ The transmission distance can be extended up to 492ft / 150m at the
resolution of 1080P@60Hz, or 394ft / 120m at 4K2K@60Hz 4:4:4 via a single CAT6
cable
☆ Support bi-directional IR signal and USB KVM signal pass-through
☆ Support bi-directional POC (Power over Cable) function
☆ Compact design for easy and flexible installation
Package Contents
- 1 x 18Gbps HDBaseT Extender (Transmitter)
- 1 x 18Gbps HDBaseT Extender (Receiver)
- 1 x IR Blaster cable (1.5 meters)
- 1 x IR Receiver cable (1.5 meters)
- 1 x USB cable (1.5 meters)
- 4 x Mounting Ears
- 8 x Machine Screws (KM3*4)
- 1 x 24V/1A Locking Power Supply
- 1x User Manual
Specifications
Technical|
---|---
HDMI Compliance| HDMI 2.0b
HDCP Compliance| HDCP 2.2
Video Bandwidth| 18Gbps
Video Resolution| Up to 4K2K@60Hz YUV 4:4:4
USB Compliance| USB 1.1
IR Level| 5Vp-p
IR Frequency| Wideband 20K-60KHz
Transmission Distance| 1080P@60–150m, 4K60 –120m
Color Space| RGB, YCbCr_4:4:4, YCbCr_4:2:2
Color Depth| 8-bit, 10-bit, 12-bit (1080P@60Hz) 8-bit (4K2K@60Hz YUV4:4:4)
8-bit, 10-bit, 12-bit (4K2K@30Hz)
HDR| HDR, HDR10, HDR10+, Dolby Vision, HLG
Audio Format| LPCM 7.1CH, Dolby True HD, and DTS-HD Master
ESD Protection| Human body model ±8kV (Air-gap discharge) &
±4kV (Contact discharge)
Connection
Transmitter| Input: 1 xHDMI IN [TypeA, 19-pin female] 1x IR IN [3.5mm Stereo
Mini-jack] 1xSERVICE [Micro-USB jack] 1xUSB [USB-B, 4-pin female] Output:
1xHDBT OUT [RJ45] 1xIR OUT [3.5mm Stereo Mini-jack]
Receiver| Input: 1xHDBT IN [RJ45 with light] lx IR IN [3.5mm Stereo Mini-jack]
1 xSERVICE [Micro-USB jack] Output: 1 xHDMI OUT [TypeA, 19-pin female] 1x IR
OUT [3.5mm Stereo Mini-jack] 2xUSB [USB-A, 4-pin female]
Mechanical mmil
Housing| Metal Enclosure
Color| Black
Dimensions| Transmitter / Receiver:140mm (W)x65mm (D)x18mm (H)
Weight| Transmitter: 246g, Receiver: 246g
Power Supply| DC 24V/1A;
Support POC function
Power Consumption| 10W
Operating Temperature| 0°C — 40°C / 32°F — 104°F
Storage Temperature| -20°C — 60°C / -4°F — 140°F
Relative Humidity| 20-90% RH (non-condensing)
Operation Controls and Functions
5.1 Transmitter Panel
| No. | Name | Function Description | |
|---|---|---|---|
| 1 | PWR LED | The red LED is on when the Transmitter is powered on. | |
| 2 | EDID DIP switch | Used for EDID setting (dial to COPY by default). |
COPY: Copy the EDID of the HDMI OUT port of Receiver. STD: Default 1080P 2CH
3| SERVICE| Firmware update port.
4| DC 24V| DC 24V/1A power input port.
Note that the extender supports POC function, it means that either Transmitter
or Receiver is connected to 24V/lA power supply, the other
doesn’t need power supply.
5| HDBT OUT| HDBT output port, connecting to the HDBT IN port of the Receiver
with CAT6 cable.
6| Link Signal Indicator (Green)| •Illuminating: Transmitter and Receiver are
in good connection status.
•Flashing: Transmitter and Receiver are in poor connection status.
•Dark: Transmitter and Receiver are not connected.
7| Data Signal Indicator (Yellow)| •Illuminating: HDMI signal with HDCP.
•Flashing: HDMI signal without HDCP.
•Dark: No HDMI signal.
8| HDMI IN| HDMI signal input port, connecting to HDMI source device such as
DVD play or Set Top Box.
9| IR IN| Connect to IR receiver cable, the IR receive signal will emit to the
IR OUT port of the Receiver.
---|---|---
10| IR OUT| Connect to IR blaster cable, the IR emit signal is from the IR IN
port of the Receiver.
11| PC| USB-B port, connecting to PC.
5.2 Receiver Panel
| No. | Name | Function Descripal |
|---|---|---|
| 1 | Power LED | The power LED is on when the Receiver is powered on. |
| 2 | SERVICE | Firmware update port. |
| 3 | DC 24V | DC 24V/1A power input port. |
Note that the extender supports POC function, it means that either Transmitter
or Receiver is connected to 24V/lA power supply, the other
doesn’t need power supply.
4| HDBT IN| HDBT input port, connecting to the HDBT OUT port of Transmitter
with CAT6 cable.
5| Link Signal Indicator (Green)| • Illuminating: Transmitter and Receiver are
in good connection status.
• Flashing: Transmitter and Receiver are in poor connection status.
• Dark: Transmitter and Receiver are not connected.
6| Data Signal Indicator (Yellow)| • Illuminate: HDMI signal with HDCP.
• Flash: HDMI signal without HDCP.
• Dark: No HDMI signal.
7| HDMI OUT| HDMI signal output port, connecting to HDMI display device such
as TV or monitor.
8| IR IN| Connect to the IR receiver cable. The IR signal will send to the IR
OUT port of the Transmitter.
9| IR OUT| Connect to the IR blaster cable, the IR signal is from IR IN port
of the Transmitter.
10| USB ports| Two USB-A ports, connecting to keyboard and mouse respectively.
5.3 IR Pin Definition
IR Receiver and Blaster pin’s definition is as below:
Note:
When the angle between the IR receiver and the remote control is ± 45 °, the
transmission distance is 0-5 meters;
When the angle between the IR receiver and the remote control is ± 90 °, the
transmission distance is 0-8 meters.
Application Example
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>