OzSpy HAI2MPSTATIONW HD 1080P Weather Station Camera User Manual

OzSpy HAI2MPSTATIONW HD 1080P Weather Station Camera User Manual

www.ozspy.com.au

Quick guide of Wi-Fi camera function

1.Download Free App Pro iCam from App Store or Google Play.
2.Plug in power —> Turn on indoor unit’s switch, wait for 2 minutes (Blue light always on, red light blink slowly.);
3.Enter smartphone setting —> Search and connect device’s Wi-Fi named: YM……, wait till phone status bar appear Wi-Fi symbol;
4.Eneter APP, press top right “+” icon > Add new online camera > Search(LAN) > Select camera > Press Ok > Camera Online then;

TIPS:

1. Please select【Change】to change device password for security 【default: 8888】;
2.This step = P2P mode, can check video locally when without Wi-Fi.

5. Press gear icon after camera > Device Settings > Wi-Fi Config > Select your Wi-Fi > Input password > Press Ok;
6.Quit APP, wait 30 seconds (device will restart automatically) and connect with your set Wi-Fi (back red light always on);
7.Enter APP to check live video locally or remotely anywhere. P.S.: Contact local dealer for video guide setting up.

Overview

The HD 1080P Weather Station Security Wi-Fi Camera is a multifunctional weather station with an integrated 1080P high–definition hidden Wi-Fi camera.
First, it can be used as a normal weather station to detect and show both outside and inside temperature and humidity, and display time/date/moon phase;
Second, the device can be easily connected to Wi-Fi and watch live video, or remotely take photo and video by APP in smartphone anywhere in the world; Also, it supports Point to Point (P2P) function, connected by APP to smartphone for local live video without Wi-Fi.
Third, the item also support motion detect alarm function, cycle recording and work when charging.

Usages: Nanny camera, Home/ Shop/ Office/ Warehouse surveillance camera……

Product instruction

Getting Started with the Weather Station

Open back cover, remove the protective seal from the battery and plug it into AC power using the included adapter; LCD screen will be lighted on.
Insert 2pcs*AAA batteries for outdoor unit, it will be powered on automatically and send out current actual weather info in 1 minute. Indoor unit will get and show this info on the indoor unit LCD screen.

TIPS:

1. Outdoor unit is NOT water or weather proof;
2. Please power on outdoor unit in 3 minutes after indoor unit turned on; Or, indoor unit need to be totally restarted (plug off power and take out battery) for setting the connection of both units.
3. Transmit distance between outdoor and indoor unit is about 40-50 meters when not any blocks.

TIME: Long press to set time/date
ALM: Long press to set alarm
UP : Up key(Press to change from 12 hour format time to 24 hour)
DN : Down key(Press to change from Centigrade degree to Fahrenheit)
MAX/MIN: Press to show the max or min temperature and humidity of the day
ALERT: Long press to set outdoor max/min temperature alarm ON/OFF: Turn on/off the backlight

Getting started of Wi-Fi camera part

Step1: Download and install APP

Scan below QR code or search and download free APP named “Pro iCam” in Apple APP store, Google play or Electronic market, and install it.

Step2: Connect power and turn on device

Remove the protective seal from the battery and plug it into AC power using the included adapter; Turn on right side switch, and wait for 2 minutes.
(Blue light always on, red light blink slowly.)

Step 3: Connect Wi-Fi

1. Open smartphone setting, search and connect the device’s wireless signal named “YM……”, wait Wi-Fi connected, and phone status bar appear Wi-Fi symbol.

2. Open APP, press symbol + at the top right corner, select “Add new online Camera”. Search for new camera and press ok. Then back to the first page to see the live video of camera and do the following setting.

TIPS:

1. Please select 【Change 】to change device password for security 【default: 8888】;
2.This step = P2P mode, can check video locally when without Wi-Fi.
3.Press the gear icon after the camera or long press the camera and select Device Settings, select Wi-Fi Config.

4. Select your Wi-Fi and input passcode, camera will be connected to your Wi- Fi. Your smartphone will disconnect the signal from device and connected to your Wi-Fi.
5. Quit APP, and device restart automatically and ready again in 30 seconds.
6. Enter APP and check live video locally or remotely anywhere (back red light always on).

Set camera name and password

Set name: Press the after the camera or long press the camera, select Modify device, select Name, and insert name like Office, Room……

Set code: Long press the camera and select Device Settings, select Change password.
Current one is 8888.

APP introduction:

Live video page – Click camera to check

TIPS: Each setting in Device Settings, please scroll down and press ok to save the setting.

Set and watch by PC in LAN

1. Once camera connected well with Wi-Fi, install software “IPCamera” from included CD and open software to find the connected device’s IP address.

2. Double click the IP address, insert name “admin” (no password) and press ok.

3. After above steps, you can insert setting interface. For first use, please choose langauge, then click to download and install plug-in.

4 . Click to go to the final setting interface.

5. Click left options to set other needed functions.

Specification

FAQ

1. Q: Can it work while charging or permanently on power?
A: Yes, please use a USB 5V 2A adapter to plug in power for permanent use.

2. Q: The LCD Screen is dim or not stable, always shinning?
A: The unit has low battery, please charge it.

3. Q: Can’t get device Wi-Fi signal? (Five solutions FYI).
A: 1). Please confirm the power adaptor connected;
2). Take out battery, then plug in power and wait 2 mins;
3). Press reset key for 5 seconds and wait 2 mins;
4). Turn off camera switch, then turn on again;
5). Turn off smartphone Wi-Fi for a while, then turn on to search again.

4. Q: Can’t add or set camera after connected with camera Wi-Fi?
A: Please wait phone status bar appear Wi-Fi symbol, then to do follow settings.

5. Q: Why live video screen shows up black and a searching circle spins in centre but nothing ever displays?
A: 1). If camera’s connected Wi-Fi speed is slow, please wait 10-30 seconds for live video appear;
2). One click middle of screen, select top right 480p resolution to check.

TIPS: If local Wi-Fi speed is slow, please choose lower resolution for good video and audio.

6. Q: Live video not smooth and clear?
A: Select suitable resolution according to the real-time network environment.

7. Q: How many cameras can be added to APP?
A: No limit.

8. Q: How many visitors support to check live video?

A: 1-2

9. Q: Only 1 user, but show 2 or more users?
A: 1). If login in very often, last record is still in. If check every 2-5 mins, surely will be the exact numbers of users;
2). To be safe, please change camera’s password when first use.

10. Q: Motion detect set and alarm?
A: 1). Set motion detect sensitivity in Device Settings – Alarm Config, and scroll down press OK;
2). When motion detected, camera will push a alarm message to your phone and take 3 pictures for checking in the APP [Alarm ].

11. Q: Micro SD card instruction?
A: 1). Format card before inserting;
2). When backside switch is on, every time you insert micro SD card, it will record automatically;
3). Once connected, can set SD management in app [ Device Settings – SD Card Record Config ].

12. Q: How to play micro SD card video?
A:1). Use a card reader to read and play;
2). Use APP to play back [Record – ]; 3). Play back in good speed network.

13. Q: After connected to Wi-Fi, how is the status of camera when Wi-Fi is off?

A: 1). If modem off, camera can still check local view as it is connected directly to wireless router;
2). If both modem and router off, camera will keep searching the connected Wi- Fi and connect again;
3). If above point 2, not connect; Just turn off and on backside switch again to connect Wi-Fi.

14. Q: Camera can’t hold set Wi-Fi, lost contact and offline?
A: 1). Make sure camera inside the range of good Wi-Fi signal;
2). Low battery, check if power adapter connected properly for long time use.
3). Make sure your phone network(4G/Wi-Fi)work well in remote area when checking the camera;
4). Please try to add with another phone which with good network.

15. Q: Forget camera password, or item goes abnormal?
A: Plug in power, turn on camera and wait for 2 minutes, press reset key around 5 seconds till back red light off to restore factory default. Camera restarts and get ready again in 2 minutes.

16.Q: Connect camera with wifi by micro SD card setting?

A: 1). Version need: Above 1.8.13 (Check by PC Page 12)
2). Steps:
a, Create a text file named Wi-Fi on the micro SD card
b, Input below format to the file wifi:xxxxxx (Your local Wi-Fi name) pwd:xxxxxx (Both are case-sensitive) c, Insert the micro SD card when camera is OFF d, Turn on camera, it will connect with your Wi-Fi in 10-15 seconds TIPS: Can also copy the text file from camera’s CD to the micro SD card, change Wi-Fi name and password.

17. Q: App content similar but not exact same as in manual?
A: App is always being optimized with better interface and functions.

18. Q: Any operation video demo of the camera for setting up?
A: Please contact local dealer for video guide.

DOWNLOAD

OzSpy HAI2MPSTATIONW HD 1080P Weather Station Camera User Manual – [Download PDF]

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>