Aten VS201 2-Port Video Auto Switch User Manual
- June 12, 2024
- Aten
Table of Contents
Aten VS201 2-Port Video Auto Switch
HIGHLIGHTS
The VS201 Video Auto Switch is an automatic video switch that is ideal for monitors using analog signals. In addition, the VS201 boosts signals, allowing long-distance transmission of up to 65 m (210 feet). A slide switch sets the priority for the incoming video signals for display on the monitor, and the VS201 automatically selects the proper input signal for its output port. Both features make the VS201 an excellent choice for educational environments.
Features
- Displays the video output of two computers on a single monitor or projector
- Automatic incoming signal selection (Auto)
- Quick and easy switching via a slide switch
- Long-distance transmission – up to 65 m
- Superior video quality – up to 1920 x 1440
- Supports VGA, and XGA. SVGA, UXGA, and multisync monitors
Video content sent over very long distances using a VGA cable might result in slight degradation of the video signal and quality.
Specification
| Function | VS201 |
|---|---|
| Display Connections | 2 |
Connectors
| Video In| 2 x HDB-15 Male (Blue)
Video Out| 1 x HDB-15 Female (Blue)
Power| 1 x DC Jack
LEDs
| Remote| 1 (Red)
Local| 1 (Red)
Power| 1 (Green)
Switch| Priority| 1 x Slide Switch
Video| 1920 x 1440 @ 60Hz
Bandwidth| 150 MHz
Cable Distance| Up to 65 m
Power Consumption| DC 5.3 V, 0.32 W
Environment
| Operating Temp.| 0–50°C
Storage Temp.| -20–60°C
Humidity| 0–80% RH, Non-condensing
Physical Properties
| Housing| Metal
Weight| 0.20 kg
Dimensions (L x W x H)| 10.36 x 7.90 x 2.79 cm
ATEN International Co., Ltd. 3F., No.125, Sec. 2, Datong Rd., Sijhih District., New Taipei City 221, Taiwan
- Phone: 886-2-8692-6789
- Fax: 886-2-8692-6767
- www.aten.com
- E-mail: marketing@aten.com
© Copyright 2014 ATEN® International Co., Ltd. ATEN and the ATEN logo are trademarks of ATEN International Co., Ltd. All rights reserved. All other trademarks are the property of their respective owners.
CONNECTIONS
You can automatically share a single display between two video sources with the Aten VS201, a 2-Port Video Auto Switch. When connecting numerous video sources to a single monitor or projector, such as computers, DVD players, or gaming consoles, it is frequently utilized. Automatically detecting and switching to the active video source is the switch.
The Aten VS201 normally has these connections:
-
Two video input ports
You attach your video sources (computers, DVD players, etc.) to these ports. Typically, depending on the model, they are either VGA or HDMI connections. The cords you would use to connect your devices to these input ports are typically VGA or HDMI cables. -
Port for video output:
You attach your display device (monitor, projector, etc.) to this port. Again, depending on the model, it can be VGA or HDMI. -
Power Source:
It’s possible that the switch needs the power to work. There might be a power input port where you can plug in the supplied power adapter or another suitable power supply. -
Toggle button
You may be able to manually choose the active video source on some models by pressing the manual switch button. If you wish to switch between sources without depending on automatic detection, this can be helpful. -
LED indicator
For each input source, LED indications that indicate which source is active may be present. -
Adaptive Switching
It’s possible for the switch to identify the active video source automatically and switch to it. There might be a feature that allows users to assign a source’s priority, causing the switch to automatically switch to that source if it becomes active. -
Audio:
Depending on the model, each visual input may have a corresponding audio port. This enables you to switch between sources of audio and visual signals. -
Remote management:
Some versions may come with a remote control so you may manually change the video sources or settings.
PRECAUTIONS
It’s crucial to follow a few guidelines when using the Aten VS201 2-Port Video Auto Switch to ensure correct performance, prevent damage, and maintain a positive user experience:
-
Video signals that are compatible
Make that the Aten VS201 can receive the video signals from your devices. To ensure seamless operation, check the supported resolutions and video signal formats (VGA, HDMI, etc.). -
Superior Cables
When connecting your video sources to the switch and the switch to the display, use high-quality cables. Signal deterioration and decreased video quality can be caused by low-quality cables. -
Requirements for power
Use the included power adapter or a compatible power source if the switch has to be powered. Mistakes may occur if the wrong or unreliable power sources are used. -
Correct Switching
Make sure that only one video source is running at once to enable the auto- switching feature to function as intended. Multiple sources being activated at once might be confusing and lead to inappropriate switching. -
light indicator
Watch the LED indications to determine which source is on at any one time. This might assist you in making sure the switch is operating properly and the required source is on. -
handling physically
Carefully handle the switch and cords. Don’t pull on cables; this can harm ports or connectors. To avoid bending pins, install and remove connectors gently. -
Ventilation
To prevent overheating if the switch produces heat, position it in a well- ventilated area. Avoid stacking anything on top of the switch that can obstruct airflow. -
Electrical static
Ground yourself when handling the switch or connecting cables to help eliminate static electricity that can otherwise harm delicate electronic components. -
The toggle button
Use the manual switch button sparingly if it is there. Using too much force could break the switch or make it malfunction. -
Environment
Keep the switch in a spot that’s clean and dry. Keep it away from dampness, very hot or very cold conditions, and a lot of dust. -
Remote management
If remote control is included with the switch, keep it away from liquids and change the batteries as needed. For best performance, aim the remote at the switch’s sensor. -
Updates and Firmware
To ensure compatibility with new gadgets and features, think about checking for updates on a regular basis if the switch has firmware or software updates available. -
Documentation
For further instructions on installation, setup, and troubleshooting, consult the user manual. To get the most out of your Aten VS201 switch, follow the manufacturer’s instructions.
FREQUENTLY ASKED QUESTIONS
What is the Aten VS201 2-Port Video Auto Switch?
The Aten VS201 is a video switch designed to automatically switch between two video sources and display them on a single monitor.
What types of video sources can the VS201 switch between?
The VS201 typically supports analog video sources, such as VGA, and allows you to switch between two devices like computers, laptops, or other compatible devices.
What is the purpose of using a video auto switch like the VS201?
The VS201 is useful when you want to display the output of two different video sources on a single monitor without manually swapping cables.
How does the auto-switching feature of the VS201 work?
The VS201 usually detects the active video source and automatically switches to display the output of that source on the monitor.
Does the VS201 require an external power source?
Yes, the VS201 usually requires an external power adapter for proper functioning.
What is the maximum resolution supported by the VS201?
The maximum resolution supported can vary, but it's typically up to 1920x1440 pixels for VGA.
Can I manually select the video source using the VS201?
Some models of the VS201 might include manual switching buttons, allowing you to manually choose the active video source.
Does the VS201 support audio switching as well?
The VS201 is primarily designed for video switching and might not support audio switching.
Is the VS201 suitable for home entertainment setups?
The VS201 is more commonly used in office or professional settings where automatic video switching is needed.
Can I use the VS201 with modern digital video sources like HDMI or DisplayPort?
No, the VS201 typically supports analog video sources like VGA, so it might not work with modern digital video formats.
Is the VS201 compatible with both Mac and PC systems?
Yes, the VS201 is usually compatible with both Mac and PC systems that have VGA output.
Does the VS201 require any additional software or drivers?
The VS201 is generally plug-and-play and doesn't require additional software or drivers.
Can I use the VS201 for presentations in a conference room setup?
Yes, the VS201 is often used in conference room setups to switch between different presenters' laptops.
Can I use the VS201 to switch between video sources for surveillance monitors?
The VS201 could be used for this purpose if the surveillance system outputs analog VGA signals.
Does the VS201 support high refresh rates for gaming?
The VS201 might not be suitable for gaming due to its analog VGA support and potential limitations in refresh rates.
DOWNLOAD THE PDF LINK:Aten VS201 Video Auto Switch User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>