OzSpy AF-MQU350 USB Memory & Voice Recorder User Manual

OzSpy AF-MQU350 USB Memory & Voice Recorder

USER MANUAL

Download Driver AF-MQU350 Time Setup: [Download Driver]

Cautions in use

• We are not responsible for the loss of recordings caused by wrong usage, A/S, other reasons.
• We are not responsible for the damage or third party’s claims caused by the usage of this product.
• Disassembly, remodeling, impact, the usage in place of low temperature, high temperature, high humidity can be the cause of failure.
• Please save the important recordings into PC frequently.

Name of each part

Charging

Charging time : about 2 hours

• This product has built-in rechargeable battery.
• Please charge it before use.
• When you open ®cap and connect @USB terminal into the USB port of PC, ©charging indicating lamp is turned on and charging starts.
• When charging is completed, charging indicating lamp blinks.

Battery remains indication

• When recording starts or the body is separated from PC or USB adaptor after charging, the lamp indicates battery remains in three stages for 5 seconds according to battery remains.

Connecting into PC (PC O/S: Windows XP, Vista, 7, 8, 10)

• When this device is connected into the USB port of PC after making recording switch in stop position, it is recognized as a removable disk.
• For playback, please use the music playback software of PC.

** Caution : When you take the product out of PC, please be sure to perform “safe removal of hardware”. If you remove USB forcibly, fatal error can happen to the product.

Format

• When you format MemoQ(removable disk), all data of product is deleted.

**Caution: It supports the format type of FAT32 only.
If you change to other type, product can not work properly.

** Caution : Data deleted once can not be restored.

Correlation table between  recordable time and standby time

Standby time means the time to stand by without recording due to no sound during SVOS recording.
This product stands by for about 25 days(about 600 hours) in SVOS mode in state of full charge. In actual use. it repeats sound detection recording and stop and standby day error can occur.
The left graph is the graph of recordable time and standby day.
Standby day becomes short proportionally to recorded time.

Specifications

Warranty Card

Paid service

– Defect caused by careless use.
– Defect caused by user’s internal modification.
– Defect caused by natural disasters like fire, sail damage. nood. earthquake, etc.
– Defect out of warranty period.

HOW TO RECORD

Setting before record:

• Time setting
• Recording soundquality setting
• SVOS level setting

Time setting

1. After USB connection on PC, perform the program of Time Setup’ saved in product by double-click, and the right window of “date_time.cfg Creator” appears.
2. Click the button of “Start” in the window of “dale_time.cfg Creator”, and file of “date_time.cfg” is created in product.
3. Separate product from PC, and battery remains is indicated on charging lamp and lamp blinks rapidly and time setting is c ompleted.

Caution-1. Date afld time set in PC is set up automatically. (Time to click the button of Start is set up at the point of separating product.)

Caution-2. When battery is discharged, date is initialized. Before record, perform time setting again and use it.

Recording sound quality setting

• In Mode(Recording Quality) within right window of “date_time.cfg Creator”, select XHQ or HQ and click the button of “Start”, and setting is completed.
• Basic setting is “HQ”.

Recording time is the standard of memory capacity and is different from the hours of battery use (continuous recording lime}.

576hrs
HQ(High Quality)| about 288hrs| about 576hrs| about 1152hrs

SVOS level setting

• You can set up the volume of sound to start recording in sound detection recording.
• In SVOS Level within right window of “date_time.cfg Creator”, select one among “+2, +1, 0, -1, -2” and click the button of “Start”, and setting is completed.
• Basic setting is “O”.
• Please change after testing according to place and situation.

Recording is possible without setting.
(Basic setting Sound Quality-HQ, SVOS-0)

SVOS Level

-2| -1| 0| 1| 2
(response to loud sound| ………………| (basic setting)| ……………….| !(response to low sound)

Recording

• When you turn ©recording switch to the direction of , continuous recording starts after about 5 seconds.

• When you turn ©recording switch to the direction of , super voice operated system(SVOS) starts after about 5 seconds. In case of super voice operated system, if there is no sound for 1 minute during recording, it saves recording and is converted to standby mode and start recording again automatically when sound is detected.
  (Max recording standby time : about 25 days)

• When you move the slot of ©recording switch to the center, recording stops and current recordings are saved.
  Recording file is saved in the folder of VOICE as a format of MP3.

• In case of continuous recording, recording less than 5 hours is saved to one file and recording more than 5 hours is split and saved by the unit of 5 hours.

• When recording files exceed 9,999, recording is not possible any more. Please delete unnecessary recording files and use it.

We recommend continuous recording if you can control recording start and stop with voice recorder carried and
we recommend SVOS recording when you install voice recorder in specific place and can not control recording start and stop.

Recording for a long time (use of external power)

When you connect it into PC or USS adaptor during recording, you can record for a long time. While you record for a long time, charging indicating lamp blinks in the interval of 5 seconds and you can record up to the recording time per memory.

DOWNLOAD

OzSpy AF-MQU350 USB Memory & Voice Recorder User Manual – [Download PDF]

Download Driver AF-MQU350 Time Setup: [ Download Driver]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>