TRUEFREE GT1 Watch User Manual
- June 14, 2024
- TRUEFREE
Table of Contents
Watch GT1
USER MANUAL
Product Introduction and Packing List
Packing list
Smartwatch, Charging cable, User manual
Charge
Align the charging contacts on the back of the watch with the metal contacts of the charger until the charging level indicator is displayed on the watch screen. 0-100% charging time is about 120 minutes.
Precautions:
- The charging cable is connected to a standard USB charger purchased from regular channels. The output voltage is 5V and the output current is 0.5A or above. If the device is not used for a long time, please make sure to recharge it every three months.
- If the watch cannot be turned on after being placed for a long time, it needs to be pre-charged for about 1 minute before the charging icon is displayed when it is used again.
- When charging, please wipe the charging contacts of the watch clean to avoid short circuit caused by sweat or moisture residue.
- After the product is fully charged, please disconnect the charging cable from the power source to prevent a short circuit when it comes into contact with a conductive object.
Wearing and Removing the Watch
- For daily wearing, wear the watch about one finger away from the wrist bone, and adjust the tightness of the wristband to a comfort- able position.
- It is recommended to tighten the watch strap during exercise, and loosen it after exercise. Tips: Wearing it too loose may affect the data collected by the heart rate.
If you need to disassemble the strap, please refer to the illustration.
Note: After installing the strap, please pull the strap properly to ensure successful installation.
APP download
SOUNDPEATS SPORTS App (Hereinafter referred to as App) is a must-have application for using the watch. You can manage the watch through the App and experience more functions brought to you by the watch.
- Long press the power button on the right side of the watch to turn it on.
- Scan the QR code on the watch screen with your mobile phone (APP download and Bluetooth device binding integrated QR code) to download the App.
- You can also scan the QR code at the bottom right or search for SOUNDPEATS SPORTS on Google Play for Android to download and install the App. Apple mobile phone users can search for SOUNDPEATS SPORTS on the App Store to download and install the App.
- Open the App, click on the device page, and follow the interface prompts to complete the pairing connection or click Scan in the upper right corner to scan the QR code on the watch screen. When pairing, please make sure that the Bluetooth names displayed on the phone and watch are the same.
- After the pairing is successful, you can start using the watch.
Operating Instructions
a. Swipe down from the top of the watch face homepage: View the shortcut menu.
b. Swipe from bottom to top on the home page of the watch face: View instant
messages.
c. Swipe from left to right on the dial home page: View the main function
menu.
d. Swipe from right to left on the homepage of the watch face: View the
function interface.
e. Quick access to dial replacement: press and hold the dial interface for 3 seconds to enter the dial selection interface. Swipe left and right to switch the dial, and click the selected dial to successfully set it.
f. Power on/off: Long press the side button on the dial interface for about 3 seconds.
g. When operating normally, press the power button to return to the previous level; when in the dial interface, press the power button to turn on/off the screen.
Basic Parameters
| Product Number | TRUEFREE Watch GT1 |
|---|---|
| Dimensions of Watch (without strap) | 484012mm |
| Watch Weight (including strap) | 41g |
| Screen Size | 1.96″ |
| Resolution | 240*282 |
| Bluetooth Connection | Bluetooth V5.2 |
| Battery Capacity | 300mAh |
| Battery Life | about 7 days |
| Waterproof and Dustproof Grade | IP68 |
| Operating temperature | 0°C-45°C |
| Synchronized data platform | SOUNDPEATS SPORTS |
| equipment requirements | Android 6.0 and above, i0S11 and above |
Precautions for Use
- This product supports IP68 level waterproof, but it is not suitable for corrosive liquids such as hot water and tea, and diving over 3 meters. The above behaviors may cause the product to enter water, which is destructive use, and does not enjoy product warranty and free maintenance services.
- In daily use, avoid wearing the watch too tightly. Please keep the contact parts of the watch dry and clean the wristband with clean water regularly. If redness and swelling appear on the contact area, please stop using it immediately and consult a doctor.
- The physical buttons and touch screen of the watch do not support underwater operation. When the watch is wet, please wipe the water stains on the surface with a soft cloth before operating.
- The heart rate, electrocardiogram, body temperature, blood pressure, blood oxygen and other health signs data involved in this product are for reference only and not as a basis for medical diagnosis.
Warranty Policy
Our warranty on the product begins at the time of purchase from the original purchaser and is limited to manufacturing defects for a period of 12 months.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class 6 digital device, pursuant to Port 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference In a residential Installation. This equipment generates uses and can radiate radio frequency energy and, if not Installed and used in accordance with the Instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the Interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to
the following Iwo conditions:
(1) This device may not Couse harmful Interference.
(2) this device must accept any Interference received, including interference
that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following fwo conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device”
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
MANUFACTURER
Shenzhen SoundSOUut Information
Technology Company Limited.
CUENT
Shenzhen Ginto E-Commerce Co.,Limited
Building B. 13th Floor, 08, Huihai Plaza No. 19, Longhua Street, Sanlian
Community. Shenzhen, Guangdong Province
[email protected]
www.itruefree.com
Company: Qing UG (haftungsbeschrankt)
Address: Undinestr. 7, 12203 Berlin Germany
TANMET INTL BUSINESS LTD. 9 Pantygraigwen Road, Pontypridd. Mid Glamorgan,
CF37 ZRR.UK [email protected]
FCC ID: 2AFTU-DD028 IC ID: 27785-WATCHI
MADE IN CHINA