OzSpy DRFDCD06 Key Ring Phone and Camera Bug Detector User Manual
- June 12, 2024
- OzSpy
Table of Contents
OzSpy DRFDCD06 Key Ring Phone and Camera Bug Detector
USER MANUAL
This compact mobile phone and wireless camera detector uses state of the art technology to detect the presence of active mobile phones (including stealth/ghost phones that may show no visible signs of calls) as well as hidden wireless cameras (1.2Ghz and 2.4Ghz).
Note: On/Off Switch in red box
Using the Device
-
To start using, move the On/Off switch into the ‘On’ position (marked as ‘1’ on the back of the device) and the LED will start to flash.
-
Aim the detector where you want to check for a hidden camera and or wireless microphone in operation.
-
If the LED stays solid and no longer flashes, there is either:
o WiFi signal detected (2m maximum distance)
o Cellular phone in use (5m maximum distance) -
To stop using, move the On/Off switch into the ‘Off’ position (marked as ‘0’ on the back of the device) and the LED will no longer flash.
If the LED light remains solid when turned on, the battery may need replacement
Battery Replacement
Take a ball point pen, or similar object, and use it to carefully pry the housing apart.
Once the cover is removed, slide the old battery down, away from the LED to Remove it from the unit.
Slide the new battery (CR2032 3V) under the holder and ensure it is sitting all the way in.
Reattached the keyring loop and replace the cover
DOWNLOAD
OzSpy DRFDCD06 Key Ring Phone and Camera Bug Detector User Manual – [Download PDF]