Lorelli 20230713104921 Bath Tub with Plug Thermometer and Bath Pad Instruction Manual
- June 12, 2024
- lorelli
Table of Contents
Lorelli 20230713104921 Bath Tub with Plug Thermometer and Bath Pad
MANUAL INSTRUCTION
designed in EU
Scan the QR code to get more product information and manual instruction in more languages. Download QR Scanner App onto your device. SRB/HR/ME/BIH
IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE
REFERENCE! WARNING – DROWNING HAZARD
WARNINGS!
- WARNING! DANGER OF DROWNING
- Children have drowned while bathing !
- Children can drown in as little as 2 cm of water in a very short time !
- Always remain in contact with your child during bathing!
- The bath pad must not be used outside the bathtub which is provided by the manufacturer!
- Always ensure the suction cups are well adherent to the bath tub!
- Never leave your baby unattended in the bath, even for a few moments. If you need to leave the room, take the baby with you!
SAFETY REQUIREMENT
Babies and young children are at risk of drowning when being bathed. Never use this product on an elevated surface not intended for this product. To avoid scalding by hot water, position the product in such a way to prevent the child from reaching the source of water. The limit variation of the thermometer is + 2 ° C, that is why always check the water temperature before bathing the child. The typical water temperature for bathing a child is between 35 °C and 38 °C. The recommended bathing time is 10 minutes. Always check the stability of the product before use. Do not use the product if any components are broken or missing. Do not use replacement parts or accessories other than those approved by the manufacturer. After each use wash with soap and water, rinse and dry. The symbol ” MAX =~~~ ” is used to indicate the maximum level of water to be used . Bath cradle: This function can be used up to when your child can sit unaided. Bath cradle: Use this product only in a compatible children’s bath tub. Bath cradle: Always check the attachment and stability of the non-standalone bathing aid on the bath tub. Bath cradle: This function can be used until your child starts to sit alone. Never place the product close to flames or other strong heat sources (e.g. electric heaters or radiators). Never install baby bath tub suspended on its edges between two other objects. It is suitable for children with a maximum weight of 10 kg.
EN17072: 2018
Prevention and maintenance instructions
-
Check the product regularly for cracks or breakage.
-
Do not clean with aggressive detergents containing abrasive particles, ammonia, bleach or alcohol.
Store the product in a clean and dry place, without moisture and at a safe distance from heat sources! Do not expose to direct environmental influences, sun, rain, moisture, or sudden temperature changes! -
In case of problems related to normal operation, contact an authorized service center for consultation or repair.
The bathtub is compatible with STAND FOR BATHTUB 88 CM. Available separately.
This bathtub can be used on the stand-up to when the child tries to stand up
by itself.
Always check the attachment and the stability of the bathtub on the stand. The
maximum total load of the product is 25 kg. Make sure the stand is placed
firmly on even surface. Make sure the filled-up bath tub is firmly placed on
the stand. Do not move the stand from one place to another after placing the
child in the bathtub.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>