Lenovo QLogic 2-Port 10Gb CNA (CFFh) for BladeCenter User Guide
- June 3, 2024
- Lenovo
Table of Contents
- Lenovo QLogic 2-Port 10Gb CNA (CFFh) for BladeCenter
- About The Product
- Part number information
- Features
- Operating environment
- Supported servers and I/O modules
- Popular configurations
- Operating system support
- Related publications
- Notices
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Lenovo QLogic 2-Port 10Gb CNA (CFFh) for BladeCenter
About The Product
The QLogic 2-port 10Gb Converged Network Adapter (CFFh) for BladeCenter offers robust 8Gb Fibre Channel storage connectivity and 10Gb networking over a single Converged Enhanced Ethernet (CEE) link. Because this adapter combines the functions of a Network Interface Card and a Host Bus Adapter on a single converged adapter, clients can realize potential benefits in cost, power and cooling, and data center footprint by deploying less hardware.
Did you know?
These Converged Network Adapters are backward compatible with many 4Gb storage
targets and work with most existing LAN and SAN infrastructures, providing an
investment protection when consolidating data centers. You can use this
adapter with the 10Gb Pass-Thru Module and connect to a converged top-of-rack
switch such as the Brocade 8000 or Nexus 5000. With this setup, you can reduce
hardware, as well as power and cooling costs, while boosting performance by
operating at 10Gb bandwidth.
The adapter connects to the midplane directly, without having to use cables or
SFP modules. By eliminating these components for up to 14 servers, the
resulting savings alone cover the BladeCenter chassis investment.
Part number information
Table 1. Ordering part number and feature code
Description| Part number| Feature code
(x-config / e-config)
---|---|---
QLogic 2-port 10Gb CNA (CFFh) for BladeCenter| 00Y3280| A3JB / 8275
QLogic 2-port 10Gb Converged Network Adapter (CFFh)| 42C1830| 3592 / 8275
Withdrawn from marketing
These part numbers include the following items:
- One QLogic 2-port 10Gb Converged Network Adapter (CFFh)
- Documentation package
Features
The expansion card has the following features:
- Combo Form Factor (CFFh) PCI Express 2.0 x8 adapter
- Communication module: QLogic ISP8112
- Support for up to two CEE HSSMs in a BladeCenter H or HT chassis Support for 10Gb Converged Enhanced Ethernet (CEE)
- Support for Fiber Channel over Converged Enhanced Ethernet (FCoCEE) Full hardware offload for FCoCEE protocol processing
- Support for IPv4 and IPv6
- Support for SAN boot over CEE, PXE boot, and iSCSI boot
- Support for Wake on LAN
- Support for Jumbo Frames
- Support for BladeCenter Open Fabric Manager for BIOS, UEFI, and FCode
Stateless offload features include:
- IP, TCP, and UDP checksum offloads
- Large and Giant Send Offload (LSO, GSO)
- Receive Side Scaling (RSS)
- Header-data split
- Interrupt coalescing
- NetQueue
IEEE standards compliance:
- 802.1Qbb rev. 0 (Priority-based flow control)
- 802.1Qaz rev. 0 (Enhanced transmission selection)
- 802.1Qaz rev. 0 (DCBX protocol)
- 802.3ae (10Gb Ethernet)
- 802.1q (VLAN)
- 802.3ad (Link Aggregation)
- 802.1p (Priority Encoding)
- 802.3x (Flow Control)
- 802.3ap (KX/KX4)
- IEEE 1149.1 (JTAG)
- IPv4 Specification (RFC 791)
- IPv6 Specification (RFC 2460)
- TCP/UDP Specification (RFC 793/768)
- ARP Specification (RFC 826)
Operating environment
The expansion card has the following physical specifications:
- Temperature:
- 0 to 55 °C (32 to 113 °F) at 0 to 914 m (0 to 3000 ft.) operating
- -43 to 73 °C (-40 to 163 °F) at 0 to 914 m (0 to 3000 ft.) storage
- Relative humidity: 5% to 93% (non-condensing)
Supported servers and I/O modules
The QLogic 2-port 10Gb Converged Network Adapter (CFFh) is supported in the
BladeCenter servers that are listed in Table 2.
Table 2. Supported servers
BladeCenter chassis support is based on the blade server type in which the
expansion card is installed. Consult ServerProven to see in which chassis each
blade server type is supported:
http://ibm.com/servers/eserver/serverproven/compat/us/.
Table 3 lists the I/O modules that can be used to connect to the QLogic 2-port
10Gb Converged Network Adapter (CFFh).
Table 3. I/O modules supported with the QLogic 2-port 10Gb Converged Network
Adapter (CFFh)
Withdrawn from marketing
Supported I/O modules are supported in BladeCenter H and BladeCenter HT
chassis only.
In BladeCenter H, the ports of CFFh cards are routed through the midplane to
I/O bays 7, 8, 9, and 10, as shown in Figure 3. The BladeCenter HT is similar
in that the CFFh cards are also routed through the midplane to I/O bays 7, 8,
9, and 10.
Two I/O module must be installed in the chassis for each Ethernet port that you wish to use on the expansion card. Table 4 lists the specific I/O bays in the chassis.
Table 4. Locations of I/O modules required to connect to the expansion card
Expansion card| I/O bay 7| I/O bay 8| I/O bay 9| I/O
bay 10
---|---|---|---|---
QLogic 2-port 10Gb Converged Network Adapter (CFFh)| Supported I/O module| Not
used| Supported I/O module| Not used
Popular configurations
Figure 4 shows the use of 10Gb Ethernet Pass-Thru Modules to route two Ethernet ports from QLogic 2-port 10Gb Converged Network Adapter (CFFh) installed into each server. Two 10Gb Ethernet Pass-Thru Modules are installed in bay 7 and bay 9 of the BladeCenter H chassis. All connections between the controller, card, and the switch modules are internal to the chassis. No internal cabling is needed. External (top of rack,TOR) switches that support FCoCEE and cabling are required for the pass-thru module to operate.
The components used in this configuration are listed in Table 5.
Table 5. Components used when connecting QLogic 2-port 10Gb Converged Network Adapter (CFFh) to two 10Gb Ethernet Pass-Thru Modules
Diagram reference| Part number/machine type| Description|
Quantity
---|---|---|---
| Varies| BladeCenter HS22 or other supported server| 1 to 14
| 00Y3280| QLogic 2-port 10Gb CNA (CFFh) for BladeCenter| 1 per server
| 8852 or 8740/8750| BladeCenter H or BladeCenter HT| 1
| 46M6181| 10Gb Ethernet Pass-Thru Module| 2
| 44W4408| IBM 10GBase-SR SFP+ Transceiver| Up to 28*
The 10Gb Ethernet Pass-Thru Module has 14 external 10Gb ports. You must have one transceiver for each 10Gb port in an I/O module.
Operating system support
The expansion card supports the following operating systems on the HS and LS blades:
- Microsoft Windows Server 2003, Web Edition
- Microsoft Windows Server 2003/2003 R2, Datacenter Edition
- Microsoft Windows Server 2003/2003 R2, Datacenter x64 Edition
- Microsoft Windows Server 2003/2003 R2, Enterprise Edition
- Microsoft Windows Server 2003/2003 R2, Enterprise x64 Edition
- Microsoft Windows Server 2003/2003 R2, Standard Edition
- Microsoft Windows Server 2003/2003 R2, Standard x64 Edition
- Microsoft Windows Server 2008 R2
- Microsoft Windows Server 2008, Datacenter x64 Edition
- Microsoft Windows Server 2008, Datacenter x86 Edition
- Microsoft Windows Server 2008, Enterprise x64 Edition
- Microsoft Windows Server 2008, Enterprise x86 Edition
- Microsoft Windows Server 2008, Standard x64 Edition
- Microsoft Windows Server 2008, Standard x86 Edition
- Microsoft Windows Server 2008, Web x64 Edition
- Microsoft Windows Server 2008, Web x86 Edition
- Microsoft Windows Small Business Server 2003/2003 R2 Premium Edition
- Microsoft Windows Small Business Server 2003/2003 R2 Standard Edition Red Hat Enterprise
- Linux 5 Server Edition
- Red Hat Enterprise Linux 5 Server Edition with Xen
- Red Hat Enterprise Linux 5 Server with Xen x64 Edition
- Red Hat Enterprise Linux 5 Server x64 Edition
- Red Hat Enterprise Linux 6 Server Edition
- Red Hat Enterprise Linux 6 Server x64 Edition
- SUSE LINUX Enterprise Server 10 for AMD64/EM64T
- SUSE LINUX Enterprise Server 10 for x86
- SUSE LINUX Enterprise Server 10 with Xen for AMD64/EM64T
- SUSE LINUX Enterprise Server 10 with Xen for x86
- SUSE LINUX Enterprise Server 11 for AMD64/EM64T
- SUSE LINUX Enterprise Server 11 for x86
- SUSE LINUX Enterprise Server 11 with Xen for AMD64/EM64T
- VMware ESX 4.0
- VMware ESX 4.1
- VMware ESXi 4.0
- VMware ESXi 4.1
- VMware vSphere 5
- VMware vSphere 5.1
Support for operating systems is based on the combination of the expansion card and the blade server in which it is installed. See IBM ServerProven for the latest information about the specific versions and service packs supported: http://ibm.com/servers/eserver/serverproven/compat/us/. Select the blade server and then select the expansion card to see the supported operating systems.
The expansion card supports the following operating systems on the Power Systems blades:
- IBM AIX 5L for POWER Version 5.3
- IBM AIX Version 6.1
- IBM Virtual I/O Server
- IBM i 6.1
- IBM i 7.1
- Red Hat Enterprise Linux 5 for IBM POWER
- SUSE LINUX Enterprise Server 10 for IBM POWER
- SUSE LINUX Enterprise Server 11 for IBM POWER
Related publications
For more information refer to these documents:
-
U.S. Product Announcement – RoHS options reintroduced (October 16, 2012)
http://ibm.com/common/ssi/cgi- bin/ssialias?infotype=dd&subtype=ca&&htmlfid=897/ENUS112-177 -
U.S. Product Announcement (May 26, 2009)
http://ibm.com/common/ssi/cgi- bin/ssialias?infotype=dd&subtype=ca&&htmlfid=897/ENUS109-331 -
QLogic 2-port 10Gb Converged Network Adapter (CFFh) for BladeCenter Installation and User’s Guide (You will need to download the “publication release” EXE file and run it to unpack the PDF)
http://ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5081072 -
Software and firmware for the adapter
http://driverdownloads.qlogic.com/QLogicDriverDownloads_UI/Product_detail_new.aspx?oemid=395 -
IBM US Announcement Letter
http://ibm.com/common/ssi/cgi- bin/ssialias?infotype=dd&subtype=ca&&htmlfid=897/ENUS109-331 -
BladeCenter Interoperability Guide
http://lenovopress.com/bcig -
BladeCenter Products and Technology, SG24-7523
http://lenovopress.com/sg247523
Related product families
Product families related to this document are the following:
- Blade Network Adapters
Notices
Lenovo may not offer the products, services, or features discussed in this
document in all countries. Consult your local Lenovo representative for
information on the products and services currently available in your area. Any
reference to a Lenovo product, program, or service is not intended to state or
imply that only that Lenovo product, program, or service may be used. Any
functionally equivalent product, program, or service that does not infringe
any Lenovo intellectual property right may be used instead. However, it is the
user’s responsibility to evaluate and verify the operation of any other
product, program, or service. Lenovo may have patents or pending patent
applications covering subject matter described in this document. The
furnishing of this document does not give you any license to these patents.
You can send license inquiries, in writing, to:
Lenovo (United States), Inc.
8001 Development Drive
Morrisville, NC 27560
U.S.A.
Attention: Lenovo Director of Licensing
LENOVO PROVIDES THIS PUBLICATION ”AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some
jurisdictions do not allow disclaimers of express or implied warranties in
certain transactions, therefore, this statement may not apply to you.
This information could include technical inaccuracies or typographical errors.
Changes are periodically made to the information herein; these changes will be
incorporated in new editions of the publication. Lenovo may make improvements
and/or changes in the product(s) and/or the program(s) described in this
publication at any time without notice.
The products described in this document are not intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. The information contained in this document does not affect or change Lenovo product specifications or warranties. Nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of Lenovo or third parties. All information contained in this document was obtained in specific environments and is presented as an illustration. The result obtained in other operating environments may vary. Lenovo may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.
Any references in this publication to non-Lenovo Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this Lenovo product, and use of those Web sites is at your own risk. Any performance data contained herein was determined in a controlled environment. Therefore, the result obtained in other operating environments may vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment.
© Copyright Lenovo 2022. All rights reserved.
This document, TIPS0716, was created or updated on December 7, 2012.
Send us your comments in one of the following ways:
- Use the online Contact us review form found at: https://lenovopress.lenovo.com/TIPS0716
- Send your comments in an e-mail to: comments@lenovopress.com
This document is available online at https://lenovopress.lenovo.com/TIPS0716.
Trademarks
Lenovo and the Lenovo logo are trademarks or registered trademarks of Lenovo in the United States, other countries, or both. A current list of Lenovo trademarks is available on the Web at https://www.lenovo.com/us/en/legal/copytrade/.
The following terms are trademarks of Lenovo in the United States, other
countries, or both:
Lenovo®
BNT®
BladeCenter Interoperability Guide
BladeCenter Open Fabric
BladeCenter®
ServerProven®
The following terms are trademarks of other companies:
Linux® is the trademark of Linus Torvalds in the U.S. and other countries.
Microsoft®, Windows Server®, and Windows® are trademarks of Microsoft
Corporation in the United States, other countries, or both.
Other company, product, or service names may be trademarks or service marks of
others.
References
- Support | Driver Downloads | QLogic Fibre Channel HBAs and FastLinQ Ethernet adapters and controllers - Marvell
- Enterprise Business Server Solutions | IBM
- IBM Support
- BladeCenter Interoperability Guide (withdrawn product) > Lenovo Press
- IBM BladeCenter Products and Technology (withdrawn product) > Lenovo Press
- Blade Network Adapters > Lenovo Press
- QLogic 2-port 10Gb CNA (CFFh) for BladeCenter Product Guide (withdrawn product) > Lenovo Press
- Copyright and Trademark Information | Lenovo US | Lenovo US
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>