KLUS PUSZ-MR-1 Power Supply Suspension Set Instruction Manual
- June 7, 2024
- KLUS
Table of Contents
KLUS PUSZ-MR-1 Power Supply Suspension Set
Specifications
- Product Name: Fastener set PUSZ-MR-1
- Model Number: C28132
- Contents: Screw M6x45, Drywall anchor M6x37, Nail anchor M6x60, Connector conductive, Pressure screw M6x6, Fastener masking cover, Conical spring, Power connector dia. 6, Pad M6, Pressure screw M6x70, PUSZ head, Sleeve for the cable clamp, Conductive terminal block with screws, Nut M3, Locking washer M3, Power connector dia. 3, Pad 3.2, PUSZ head connector, MR hook
Product Usage Instructions
Preparation
- Ensure you have all the components from the fastener set PUSZ-MR-1 (ref. C28132) ready for installation.
Screw M6x45 and Drywall anchor M6x37
- Use the screw M6x45 and drywall anchor M6x37 to securely attach the desired item to a drywall surface.
Nail anchor M6x60
- For heavier items, use the nail anchor M6x60 to provide additional support.
Connector conductive and Pressure screw M6x6
- Connect the conductive connector and secure it in place using the pressure screw M6x6.
Fastener masking cover and Conical spring
- Use the fastener masking cover to conceal the fasteners and add a neat finish. The conical spring may provide additional tension or support.
Power connector dia. 6 and Pad M6
- Connect the power connector dia. 6 and secure it in place using the pad M6.
Pressure screw M6x70 and PUSZ head
- Use the pressure screw M6x70 in conjunction with the PUSZ head for specific mounting requirements.
Sleeve for the cable clamp and Conductive terminal block with screws
- Utilize the sleeve for the cable clamp along with the conductive terminal block and screws for cable management and connectivity.
Nut M3 and Locking washer M3
- Secure components using the nut M3 along with the locking washer M3 for added stability.
Power connector dia. 3 and Pad 3.2
- For smaller connections, use the power connector dia. 3 along with the pad 3.2 for a secure fit.
PUSZ head connector and MR hook
- Complete the installation by utilizing the PUSZ head connector and MR hook for specific mounting requirements.
FAQ
- Q: Are all mounting procedures covered in the manual?
- A: Not all possible mounting procedures are presented in this manual. For additional mounting procedures and accessories, visit www.KlusDesign.eu.
PARTS
Fastener set PUSZ-MR-1 (ref. C28132)
- 1.1 Screw M6x45
- 1.2 Drywall anchor M6x37
- 1.3 Nail anchor M6x60
- 1.4 Connector conductive
- 1.5 Pressure screw M6x6
- 1.6 Fastener masking cover
- 1.7 Conical spring
- 1.8 Power connector dia. 6
- 1.9 Pad M6
- 1.10 Pressure screw M6x70
- 2.1 PUSZ head
- 2.2 Sleeve for the cable clamp
- 2.3 Conductive terminal block with screws
- 2.4 Nut M3
- 2.5 Locking washer M3
- 2.6 Power connector dia. 3
- 2.7 Pad 3,2
- 2.8 PUSZ head connector
- 2.9 MR hook
DOES NOT INCLUDE
IMPORTANT: Not all possible mounting procedures are presented here.
- More mounting procedures and related accessories can be found at www.KlusDesign.eu.
- Drawings in these instructions are simplified and only approximate the actual shapes.
Installation Instructions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>