CONCEPTRONIC KAYNE01ES USB Keyboard Smart Installation Guide

June 1, 2024
CONCEPTRONIC

CONCEPTRONIC KAYNE01ES USB Keyboard Smart

CONCEPTRONIC-KAYNE01ES-USB-Keyboard-Smart-product

Specifications

  • Connector: USB 2.0, USB-A male
  • Power Supply/Current: 5V/120mA
  • Operating Humidity: 20% ~ 90%RH
  • Dimensions: 454 x 164 x 56 mm
  • Cable Length: 1.5m
  • Package Contents: KAYNE01ES Quick Installation Guide

Product Usage Instructions

Installation

  1. Simply plug the KAYNE01ES’s USB connector into an available USB port on your computer. No driver installation is required.
  2. To use the smart card reader, install the required software from the company or authority that mandates smart card usage. Ensure the chip of the smart card faces up when inserting it into the smart card reader.

Safety Precautions

  • Avoid exposing the device to dangerous materials for children.
  • Avoid dropping, throwing, or crushing the device.
  • Do not open, modify, or damage the device.
  • Disconnect the product from the power source before cleaning.
  • Clean the product with a dry, fibre-free cloth.

Disposal Information
Dispose of the product at a recycling point to prevent harm to the environment and potential injury. Do not dispose of it with household waste.

CE / UKCA Marking
Conceptronic declares that this product complies with the directives listed in the ‘Declaration of Conformity’ section.

FAQ

  • Where can I find product support?
    For product support, visit our website at www.conceptronic.net and click on ‘Support’. If you cannot find answers on the website, contact us at support@conceptronic.net.

  • What are the system requirements for KAYNE01ES?
    The system requirements include Windows XP/Vista/7/8/10/11, Mac OS, Linux, Chrome OS, and a PC or laptop with an available USB port.

INSTALLATION

CONCEPTRONIC-KAYNE01ES-USB-Keyboard-Smart-FIG-1

SPECIFICATIONS

  • Compliance
    • EMV 4.0 Level 1 Specification Certified
    • PBOC2.0 Level 1 Certified
    • USB 2.0 Full-Speed, USB-IF Certified
    • USB-CCID
    • ISO7816 Class A, B and C (5V/3V/1.8V)
    • I2C memory card, SLE4418, SLE4428, SLE4432, SLE4442, SLE4436, SLE5536, SLE6636, AT88SC1608, AT45D041 card and AT45DB041 card
    • PC Smart Card Industry Standard – PC/SC 2.0
    • Microsoft Smart Card for Windows
    • Microsoft WHQL Smart Card Reader requirements
    • US Federal Information Processing Standards (FIPS) Publication 201 requirements on smart card reader interoperability
  • Connector
    • USB 2.0, USB-A male
  • Power Supply/Current
    • 5V/120mA
  • Operating Temperature
    • 0°C ~ 50°C
  • Operating Humidity
    • 20% ~ 90%RH
  • Dimensions
    • 454 x 164 x 56 mm
  • Cable Length
    • 1.5m
  • Weight
    • 639±20g
  • Package Contents
    • KAYNE01ES
    • Quick Installation Guide

Congratulations on the purchase of your Conceptronic KAYNE01ES.
When problems occur, we advise you to visit our support site (go to www.conceptronic.net and click on ‘Support’). If you have other questions about your product and cannot find it on our website, please contact us at: support@conceptronic.net.
For more information about Conceptronic products, please visit the Conceptronic website: www.conceptronic.net.

System Requirements

  • Windows XP/Vista/7/8/10/11
  • Mac OS, Linux, Chrome OS
  • PC, laptop with available USB port

Installation & Usage

  1. Simply plug the KAYNE01ES’s USB connector into an available USB port on your computer. No driver installation is required.
  2. To use the smart card reader, you need to install the software from the company or authority which requires the use of a smart card.
  3. Check with the company of government authority which software you need to use to access their system.
  4. When you insert the smart card in the smart card reader, make sure the chip of the smart card reader is faced up and inserted in the smart card reader.

Safety & Warnings instructions

Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling in this manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.

  • Keep the device away from water, humidity, fire or hot environments.
  • Keep your device and all its parts and accessories out of the reach of small children.
  • Do not leave the packaging material lying around carelessly. This may become dangerous playing material for children.
  • Avoid dropping, throwing or crushing the device.
  • Do not open, change or damage the device.
  • Disconnect the product from the mains before cleaning.
  • Clean the product with a dry, fibre-free cloth

Disposal of waste electrical equipment:
Dispose of the product at a recycling point. Do not dispose of together with household waste. Incorrect storage/disposal can harm the environment and/or cause injury.

CE / UKCA marking:
Conceptronic declares that this product complies with the directives listed in the section ‘Declaration of Conformity’.

Digital Data Communications GmbH – Im Defdahl 10 F, 44141 Dortmund, Germany CONCEPTRONIC® is a registered trademark of Digital Data Communications GmbH
© Copyright Digital Data Communications GmbH. All Rights Reserved.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

CONCEPTRONIC User Manuals

Related Manuals