Arenti Speed-12Q Smart Pan Tilt Wi-Fi Camera User Guide

Arenti Speed-12Q Smart Pan Tilt Wi-Fi Camer

Product Information

• Product Name: P2Q Smart Pan Tilt Wi-Fi Camera
• Manufacturer: Arena
• Support Email: [email protected]
• Website: www.arenti.com

  ---

Packing List

• Camera x 1
• Power adaptor x 1
• Power cable x 1
• Bracket x 1
• Screw x 3
• Quick guide x 1

  ---

Product Description

• LED indicator
• Microphone
• Speaker
• Reset button
• Power port
• SD card slot

  ---

Installation
Use the included mounting bracket to fix the camera to a clean surface. Alternatively, place the camera on a flat surface.

Product Configuration
Scan the QR code to download and install the Arenti APP or search for “Arenti” on the App Store (iOS) or Google Play (Android).  Open the app and create a new account if you are a new user, following the prompts to complete the account setup.  Pairing: – On the app home page, click the “+” or “Add” button and select the appropriate camera icon. Power on the camera and wait for about 30 seconds until it emits a start-up tone and the LED indicator flashes red slowly. – Select the Wi-Fi network, enter the password, and click “Next” (Ensure your phone is connected to a stable Wi-Fi network).  Scan the QR code displayed on your phone with the camera.

When you hear “dong dong dong” and the LED indicator turns solid blue, the pairing is successful. – If the camera is not in red slow blinking after 30 seconds, press and hold the reset button for 5 seconds to reset and then configure the network again. If no device is found or the pairing process fails, check the following: Ensure the Wi-Fi network is set to 2.4GHz/5GHz. Verify that the Wi-Fi password entered is correct and the same Wi-Fi network is used on the mobile device. Ensure the camera is in pairing mode. your Wi-Fi network for activity. Contact [email protected] for further assistance. 5. To add multiple
cameras, repeat the pairing steps for each device. To change the Wi-Fi network, restore the camera to factory settings and follow the pairing steps again.

Specification

• Resolution: [Resolution] – Angle of View: [Angle of View] – IR
• Distance: [IR Distance] – Pan/Tilt: Supported – Working
• Temperature: [Working Temperature] – Local Storage: Supported (SD card slot) – Input Power: [Input Power] – Power Consumption: [Power
• Consumption] – Supported Phone OS: [Supported Phone OS] – Wi-Fi: 2.4G (5G Wi-Fi not supported)

Legal Notice
For support and more information, visit www.arenti.com
Symbols

• Direct current (DC)
• Dispose of batteries or defective products according to local regulations to avoid harm to health or the environment.
• Contact your retailer or use selective garbage collection services provided by your city.

Quick start guide

1.  Packing list
2.  Product Description
3.  Installation
4.  Product Configuration
5.  Specification
6.  Legal notice

Packing list

Product Description

1. LED indicator
2. Microphone
3. Speaker
4. Reset
5. Power port
6. SD card slot

Notice
To reset the device, press and hold the reset button for 5s. The camera beeps when the operation is completed.
LED indicator of the camera:

Installation

1. Use the included mounting bracket to fix the camera to a clean surface.
2. Put the camera on a flat surface.

Product Configuration
Scan the QR code to download and install the Arenti APP. Also, you can search “Arenti” on App Store (IOS) or Google Play (Android).

Registration
Open the App. If you are a new user, tap to create a new account and follow the prompts to complete the account setup.
Note: You must agree with the Privacy Agreement.

Pairing
Open the APP home page, Click “+” or “Add” and select the icon according to the actual camera. Power on the device. For about 30 seconds, the camera will emit a start-up tone and the LED indicator will flash red slowly.
Note: When pairing, please put the camera and mobile phone close to the router. If a camera is not in the red slow blinking after 30 seconds of powering on, press and hold the reset button for 5 seconds to reset, and then configure the network again.

Select the Wi-Fi network and input the password, and then click “Next”. Make sure that your phone has connected to fluent and steady Wi-Fi already.

Scan the QR code in your phone with the camera and click “Next”, when the camera comes out “dong dong dong” and the LED indicator becomes solid blue.

If no device is found and the pairing process is not successful, please check below instructions:

1. The Wi-Fi network is 2.4GHz/5GHz.
2. The Wi-Fi password entered is correct and the same Wi-Fi network is used on the mobile device.
3. The camera is in pairing mode.
4. Check your WiFi for network activity.
5. If there doesn’t work please or you have any other problems, please contact [email protected] to get help.

Notice
If you have multiple cameras, please follow the steps again to add devices one by one.
To change the Wi-Fi network, please restore the camera to factory settings and follow the steps to add the camera.

Specification

5470-5725 MHz(Max. power＜30dBm )

Legal notice

Don’t throw batteries or out-of-order products with household waste (garbage). The dangerous substances that they are likely to include may harm health or the environment. Make your retailer take back the products or use a selective collection of garbage proposed by your city. Hereby, we declare that the radio equipment type ‘P2Q’ is in compliance with Directive 2014/53/EU The full text of the EU Declaration of Conformity is available at the following Internet address: www.arenti.com

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be  determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following  measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing the no-collocation statement. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Safety Information
Power Adapter Safety：

1. The power plug is intended to serve as a disconnect device. Do not drop or cause an impact on the power adapter.
2. If the power cable is damaged (for example, the cord is exposed or broken), or the plug loosens, stop using it at once. Continued use may lead to electric shocks, short circuits, or fire.
3. Do not touch the device or the power adapter with wet hands. Doing so may lead to short circuits, malfunctions, or electric shocks.

Child’s safety

1. Comply with all precautions with regard to the child’s safety. Letting children play with the device or its accessories may be dangerous.
2. The device and its accessories are not intended for use by children. Children should only use the device with adult supervision.

Operation safety

1. Use the device under allowed humidity and temperature conditions.
2. Do not aim the device at strong light sources (such as lamplight, and sunlight) when focusing it, to avoid reducing the lifespan of the CMOS sensor, and causing over-brightness and flickering.
3. Observe local laws and regulations, and respect the privacy and legal rights of others.

Restrictions declaration in the 5 GHz band
(i) The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems 2023. All rights reserved. All trade names are registered trademarks of respective companies Apple, the Apple logo, and iPhone are trademarks of Apple Inc. registered in the U.S. and other countries. Google, the Google logo, and Android are trademarks of Google Inc. App Store is a service mark of Apple Inc. Google Play is a service mark of Google Inc.

References

• Arenti: Best Baby Monitor & Indoor/Outdoor Security Camera

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>