DOMUS Lighting 22796 Adjustable Track Mounted Light Installation Guide
- June 12, 2024
- DOMUS LIGHTING
Table of Contents
DOMUS Lighting 22796 Adjustable Track Mounted Light
Product Information
The MOON-TRK Light is a versatile lighting solution designed for various applications. It is available in different variants:
- Blk
- Wht
- FLD
- OPAL
- SPOT
- TRIO
- TUBE
The light has the following specifications:
- Voltage: 240V
- Colour Temperature: 3000K – 4000K – 5700K (Switchable)
- Power: 6/9W
- IP Rating: 20
- Dimmable: Yes
- CRI (Color Rendering Index): >80
- Lifespan: 50,000hrs
Product Usage Instructions
- The installation of the lamp must be done by a professional electrician. Do not attempt to install it yourself.
- Before fitting the product, ensure that the power supply is switched off to avoid any electrical hazards.
- During operation, do not touch the lamp as it may become hot and cause burns.
- Keep the lamp away from hot steam and corrosive gas to avoid damage.
Please refer to the data sheet for lumen output information.
Note: Failure to read and understand the instruction sheet may void the warranty of the product.
MOON TRACK
Thank you for purchasing your new MOON-TRK Light, Please take the time to read
and understand the instruction sheet below.
Failure to do so may void warranty
Specifications
V oltage:| 240V| CCT:| 3000K – 4000K – 5700K
(Switchable)
| Dimmable:| Yes| Lifespan:| 50,000hrs
---|---|---|---|---|---|---|---
Power:| 6/9W| IP Rating:| 20| CRI:| >80| |
Please refer to the data sheet for lumen output.
Optional Optics:
Installation
- Select suitable CCT Power you need.
- Select the optics, then lock the safety wire.
- Rotate the optics on the LED engine in clockwise direction, make sure it was locked until vou hear”click”.
- Turn off the power.
- Check if the track light suitable with track rail, make sure the track rail is wired correctly and fixed well.
- Insert the track adapter into the track rail under the correct direction.
- Fix the track adapter in the track rail.
- Adjust the angle.
- Turn on the power.
Note:
- The lamp must be installed by professional electrician
- Ensure the power supply is switched off before fitting this product
- Do not touch the lamp when in use
- Keep away from hot steam and corrosive gas
29-31 Richland St. Kingsgrove. Sydney NSW 2208 Australia
- Phone: 02 9554 9600
- Fax: 02 9554 9433
- enquiries@domuslighting.com.au
- www.domuslighting.com.au
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>