DOMUS LIGHTING NEO-20-SM-TILT Round 20W Surface Mount Tiltable LED Dimmable IP20 Downlight Instruction Manual
- June 9, 2024
- DOMUS LIGHTING
Table of Contents
DOMUS LIGHTING NEO-20-SM-TILT Round 20W Surface Mount Tiltable LED
Dimmable IP20 Downlight
Installation
NEO-20-SM-TILT
Thank you for purchasing your new LED NEO-20-SM-TILT, Please take the time to read and understand the instruction sheet below. Failure to do so may void warranty.
Specifications
Voltage:| 240V| Lumen (±5%):| Warm White 3000K – 1950lm
Neutral White 4000K – 2030lm White 5000K – 1920lm| Dimmable:|
Yes
---|---|---|---|---|---
Power:| 20W| Beam Angle:| 60°| Operating Temp:|
-20°C~45°C
IP Rating:| IP20| CCT:| 3000K – 4000K – 5000K
(Switchable)| Power Factor:| 0.85
CRI:| ≥80| Lifespan:| 50,000hrs| |
- Step 1: Take out the fixtures and fitting from the carton.
- Step 2: Loosen the screws on surface mounted frame.
- Step 3: Hammer the anchors into the ceiling according to the hole distance
- Step 4: Fix the frame to the ceiling with screws provided.
- Step 5: Fix the “L””N”“G”into the terminal block.
- Step 6: Screw back the lamp to the frame according to step 2, adjust the lighting direction.
Note:
- The lamp must be installed by professional electrician
- Ensure the power supply is switched off before fitting this product
- Do not touch the lamp when in use
- Keep away from hot steam and corrosive gas
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>