DOMUS LIGHTING 10993 Pilla-Cube Outdoor Pillar Mount Light Instructions
- June 9, 2024
- DOMUS LIGHTING
Table of Contents
DOMUS LIGHTING 10993 Pilla-Cube Outdoor Pillar Mount Light
Product Information
The PILLA-CUBE is a pillar mount light that comes in two variants, black and white. It has an IP65 rating, making it suitable for outdoor use. The lamp base is E27 and can accommodate a maximum of 20W power.
The product is manufactured by Domus Lighting, located at 29-31 Richland St. Kingsgrove, Sydney NSW 2208, Australia. For any queries or support, reach out to Domus Lighting at enquiries@domuslighting.com.au or visit their website www.domuslighting.com.au
Product Usage Instructions
Before installing the PILLA-CUBE, read and understand the instruction sheet provided below to avoid warranty void.
- Ensure the power supply is switched off before fitting the product.
- The lamp must be installed by a professional electrician.
- Connect the brown wire (L) to the live wire and the blue wire (N) to the neutral wire.
- Turn on the power supply.
- Do not touch the lamp when in use.
- Keep away from hot steam and corrosive gas.
PILLA CUBE
Variants
- Blk 10993
- Wht 10994
- Item No. PILLA-CUBE
- Lamp Base E27
Thank you for purchasing your new PILLA-CUBE Pillar Mount, Please take the time to read and understand the instruction sheet below. Failure to do so may void the warranty.
Specifications
| Voltage: | 240V | Power: | Max. 20W |
|---|---|---|---|
| IP Rating: | IP65 | Lamp Base: | E27 x 1 |
Note:
- The lamp must be installed by a professional electrician
- Ensure the power supply is switched off before fitting this product
- Do not touch the lamp when in use
- Keep away from hot steam and corrosive gas
CONTACT INFORMATION
29-31 Richland St. Kingsgrove. Sydney NSW 2208 Australia
Phone: 02 9554 9600
Fax: 02 9554 9433
enquiries@domuslighting.com.au
www.domuslighting.com.au
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>