DOMUS LIGHTING PANEL-303-BLT Panel Light Trio Instructions

DOMUS LIGHTING PANEL-303-BLT Panel Light Trio

PANEL-303-BLT

Thank you for purchasing your new LED PANEL-303-BLT, Please take the time to read and understand the instruction sheet below. Failure to do so may void the warranty.

Specifications

Voltage:| 240V| Lumen (±5%):| WW – 860lm, NW – 1000lm, W – 1100lm| Dimmable:| No
---|---|---|---|---|---
Power:| 10W| Lifespan:| 40,000hrs| Operating Temp:| -20ºC~45ºC
IP Rating:| 20| CCT:| 3000K – 4000K – 5700K (switchable)| Power Factor:| ≥0.9
CRI:| ≥80|  |  |  |
Suspending: Mounting clips and suspension kits are required – (sold separately)

Recessed into ceiling

1. Remove ceiling plaster tile.
2. Connect the power supply.
3. Fix the panel light into the right place.
4. Stabilize the panel.

Suspending

1. Fix the anchor into the target place on the ceiling.
2. Fix the installation mount on the ceiling with a plastic anchor.
3. Hang the panel to the ceiling with suspended installation kits.
4. Adjust the length of the steel wire. Connect the power supply.

Surface Mounted

1. Fix the frame onto the ceiling except the plaster ceiling.
2. Insert the plug of the panel into a mains socket.
3. Slightly tilt and insert the panel into one side of the frame
4. Move the panel to the other side of the frame
5. Insert the plastic plugs into the 4 holes to keep the panel stable.
6. Turn on the main power supply

Note:

• The lamp must be installed by a professional electrician.
• Ensure the power supply is switched off before fitting this product.
• Do not touch the lamp when in use.
• Keep away from hot steam and corrosive gas.

Contact Information

29-31 Richland St. Kingsgrove. Sydney NSW 2208 Australia Phone: 02 9554 9600
Fax: 02 9554 9433
E-MAIL: enquiries@domuslighting.com.au.
Website: www.domuslighting.com.au.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>