Led2 6W Ceiling Mounted spot LED light Instruction Manual
- June 12, 2024
- Led2
Table of Contents
Led2 6W Ceiling Mounted spot LED light
Product Information
- The product is a lighting fixture with different dimming options. It is designed to be connected to a power supply of 220-240V and operates at a frequency of 50/60Hz. The fixture is compatible with various dimming methods, including Push Dim, DALI/Push Dim, DALI Dim, and Triac Dim. The driver included in the fixture allows for smooth and adjustable lighting intensity.
- The product is equipped with an integrated LED light source, which provides energy-efficient and long-lasting illumination. However, the replacement of the LED light source should only be done by a technician or a qualified person.
- The fixture has an IP20 rating, indicating that it provides protection against solid objects larger than 12.5mm in diameter but does not offer protection against water ingress.
- It is essential to turn off the main power before proceeding with the installation to ensure safety and prevent electrical shock. The installation should be carried out by a technician or a qualified person to ensure proper assembly and functioning of the product.
Product Usage Instructions
- Roll: This section may contain additional instructions or information related to the product. Please refer to the specific content in your user manual.
- Push Dim: This dimming method requires a power supply of 220-240V at 50/60Hz. Connect the fixture’s L (Line) and N (Neutral) terminals to the corresponding power supply terminals. Ensure that the main power is turned off before installation. Follow the manufacturer’s instructions for wiring and connecting the driver.
- DALI/Push Dim: For this dimming method, follow the same steps as in Push Dim but also connect the DA (DALI) terminals to the DALI control system. The DALI control system allows for advanced lighting control and automation.
- DALI Dim: This dimming method requires a DALI control system. Connect the fixture’s L and N terminals to the power supply, and the DA terminals to the DALI control system. Follow the manufacturer’s instructions for wiring and connecting the driver.
- Triac Dim: This dimming method requires a power supply of 220-240V at 50/60Hz and a phase cut Triac dimmer. Connect the fixture’s L and N terminals to the power supply, and the driver to the Triac dimmer. Choose between trailing edge or leading edge dimming, depending on the type of Triac dimmer used. Follow the manufacturer’s instructions for wiring and connecting the driver.
Remember to turn off the main power before starting any installation or
replacement procedures. Handle any lampshade/diffuser with care, as it may be
fragile. Only a technician or a qualified person should perform any
replacement of the integrated LED light source.
For more information or inquiries, visit www.led2.eu.
INSTALLATION
The installation may only be carried out by a technician
CAUTION!
Turn off the main power before proceeding with the installation in order to
prevent possible shock. The installation may only be carried out by a
technician or a qualified person. If the lamp has a lampshade/diffuser, handle
it carefully as it is fragile. With an integrated LED light source, only a
technician or a qualified person can make the replacement. The manufacturer is
not responsible for the incorrect use and assembly of its products.
CONNECTION – DIMMABLE VERSION – OPTIONAL
CAUTION!
Turn off the main power before proceeding with the installation in order to
prevent possible shock. The installation may only be carried out by a
technician or a qualified person. If the lamp has a lampshade/diffuser, handle
it carefully as it is fragile. With an integrated LED light source, only a
technician or a qualified person can make the replacement. The manufacturer is
not responsible for the incorrect use and assembly of its products.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>