Led2 BOX Ceiling Point LED Instruction Manual
- June 12, 2024
- Led2
Table of Contents
Led2 BOX Ceiling Point LED
Product Information
The product is a lighting fixture with different dimming options. It has
multiple models with different specifications:
- Model 1: Box
- Model 2: LL 6
- Model 3: N N
- Model 4: (EN)
CAUTION!
The product is designed to be installed by a technician or a qualified person.
It is important to turn off the main power before installation to prevent
electric shock. The lampshade/diffuser, if present, should be handled
carefully as it is fragile. Only a technician or qualified person can replace
the integrated LED light source.
The product is compatible with different dimming methods:
- Model 1: PUSH DIM
- Model 2: DALI/PUSH DIM
- Model 3: DALI DIM
- Model 4: TRIAC DIM
The product operates with an input voltage of 220-240V and a frequency of 50/60Hz.
Product Usage Instructions
- Before installation, ensure the main power is turned off to avoid electric shock.
- If the lamp has a lampshade/diffuser, handle it carefully as it is fragile.
- For models with an integrated LED light source, only a technician or qualified person can perform the replacement.
- Select the appropriate model based on the desired dimming method:
- Model 1: PUSH DIM
- Model 2: DALI/PUSH DIM
- Model 3: DALI DIM
- Model 4: TRIAC DIM
- Connect the product to a power source with an input voltage of 220-240V and frequency of 50/60Hz.
- Follow the specific wiring instructions for each model:
- Model 1: Connect the L (line) and N (neutral) wires to the corresponding terminals on the driver.
- Model 2: Connect the L (line) and N (neutral) wires to the corresponding terminals on the driver. For DALI functionality, connect the DA/L and DA/N wires.
- Model 3: Connect the L (line) and N (neutral) wires to the corresponding terminals on the driver. For DALI functionality, connect the DA wires.
- Model 4: Connect the L (line) and N (neutral) wires to the corresponding terminals on the driver. Use a phase-cut Triac dimmer for dimming control. For trailing edge dimming, connect the Trailing edge wire. For leading-edge dimming, connect the Leading edge wire.
- After installation, turn on the main power to activate the product.
Note: The manufacturer is not responsible for any incorrect use or assembly of its products.
The installation may only be carried out by a technician
CAUTION!
Turn off the main power before proceeding with the installation in order to
prevent possible shock. The installation may only be carried out by a
technician or a qualified person. If the lamp has a lampshade/diffuser, handle
it carefully as it is fragile. With an integrated LED light source, only a
technician or a qualified person can make the replacement. The manufacturer is
not responsible for the incorrect use and assembly of its products.
CONNECTION – DIMMABLE VERSION – OPTIONAL
CAUTION!
Turn off the main power before proceeding with the installation in order to
prevent possible shock. The installed -tion may only be carried out by a
technician or a qualified person. If the lamp has a lampshade/diffuser, handle
it carefully as it is fragile. With an integrated LED light source, only a
technician or a qualified person can make the replacement. The manufacturer is
not responsible for the incorrect use and assembly of its products.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>