Led2 WALL R LED Wall Lamp Instruction Manual
- June 12, 2024
- Led2
Table of Contents
Led2 WALL R LED Wall Lamp
Product Information
- The product is a WALL R with different models numbered from 1 to 4.
- The product is designed for installation on walls.
- It requires a main power supply of 220-240V with a frequency of 50/60Hz.
- The product has different dimming options including PUSH DIM, DALI/PUSH DIM, DALI DIM, and TRIAC DIM.
- For models with an integrated LED light source, only a technician or a qualified person can replace the LED.
- The product has different driver configurations for each model.
- The product has an IP 20 protection rating.
- The manufacturer’s website is www.led2.eu.
Product Usage Instructions
- Before proceeding with the installation, turn off the main power to prevent possible electric shock.
- The installation should be carried out by a technician or a qualified person.
- If the lamp has a lampshade/diffuser, handle it carefully as it is fragile.
- For models with an integrated LED light source, only a technician or a qualified person can replace the LED.
- Refer to the specific driver configuration for each model to ensure proper installation and compatibility with the power supply.
- Follow the dimming options (PUSH DIM, DALI/PUSH DIM, DALI DIM, TRIAC DIM) based on the desired lighting control method.
Note: The manufacturer is not responsible for the incorrect use and assembly of the products. Always refer to the user manual for detailed instructions and safety precautions.
The installation may only be carried out by a technician
CAUTION!
Turn off the main power before proceeding with the installation in order to
prevent possible shock. The installation may only be carried out by a
technician or a qualified person. If the lamp has a lampshade/diffuser, handle
it carefully as it is fragile. With an integrated LED light source, only a
technician or a qualified person can make the replacement. The manufacturer is
not responsible for the incorrect use and assembly of its products.
CONNECTION – DIMMABLE VERSION – OPTIONAL
CAUTION!
Turn off the main power before proceeding with the installation in order to
prevent possible shock. The installation may only be carried out by a
technician or a qualified person. If the lamp has a lampshade/diffuser, handle
it carefully as it is fragile. With an integrated LED light source, only a
technician or a qualified person can make the replacement. The manufacturer is
not responsible for the incorrect use and assembly of its products.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>