Led2 MATRIX 1 Rail Strip Lamp Instruction Manual
- June 12, 2024
- Led2
Table of Contents
Led2 MATRIX 1 Rail Strip Lamp
Product Information
The product is called MATRIX and it is a lighting system that supports
multiple lighting modes. It operates on a voltage range of 220-240 V with a
frequency of 50/60 Hz. The product is equipped with a driver for power supply
and control.
The MATRIX system offers different dimming options, including Push Dim,
DALI/Push Dim, DALI Dim, and Triac Dim. It also has a 3-phase track mode and
an ON/OFF switch.
The product is designed for indoor use and has an IP20 rating, which means it is protected against solid objects larger than 12.5mm but does not have protection against water.
For installation, it is important to turn off the main power before proceeding to prevent possible electric shock. The installation should only be carried out by a technician or a qualified person. If the lamp has a lampshade or diffuser, it should be handled carefully as it is fragile. Replacement of the integrated LED light source should be done by a technician or a qualified person. The manufacturer disclaims responsibility for any incorrect use or assembly of the product.
For more information, visit the manufacturer’s website at
www.led2.eu.
Product Usage Instructions
- To turn the MATRIX system ON or OFF, toggle the switch located in position 3.
- Push Dim: Connect the product to a power source of 220-240 V 50/60 Hz using the L (Line) and N (Neutral) terminals on the driver. This mode supports push dimming functionality.
- DALI/Push Dim: Connect the product to a power source of 220-240 V 50/60 Hz using the L (Line) and N (Neutral) terminals on the driver. This mode supports both DALI and push dimming functionality.
- DALI Dim: Connect the product to a power source of 220-240 V 50/60 Hz using the L (Line) and N (Neutral) terminals on the driver. This mode supports DALI dimming functionality.
- Triac Dim: Connect the product to a power source of 220-240 V 50/60 Hz using the L (Line) and N (Neutral) terminals on the driver. This mode supports triac dimming functionality. Make sure to use a phase cut Triac dimmer for this mode. Choose between trailing edge or leading edge dimming based on your requirements.
Note: Before starting the installation process, always remember to turn off the main power to avoid electric shock. The installation should be performed by a technician or a qualified person.
The installation may only be carried out by a technician
This product contains a light source of energy efficiency class F
INSTRUCTION
CAUTION!
Turn off the main power before proceeding with the installation in order to
prevent possible shock. The installation may only be carried out by a
technician or a qualified person. If the lamp has a lampshade/diffuser, handle
it carefully as it is fragile. With an integrated LED light source, only a
technician or a qualified person can make the replacement. The manufacturer is
not responsible for the incorrect use and assembly of its products.
CONNECTION – DIMMABLE VERSION – OPTIONAL
CAUTION!
Turn off the main power before proceeding with the installation in order to
prevent possible shock. The installation may only be carried out by a
technician or a qualified person. If the lamp has a lampshade/diffuser, handle
it carefully as it is fragile. With an integrated LED light source, only a
technician or a qualified person can make the replacement. The manufacturer is
not responsible for the incorrect use and assembly of its products.