Led2 MONO 40 B 30W Ceiling Lamp Instructions
- June 12, 2024
- Led2
Table of Contents
Led2 MONO 40 B 30W Ceiling Lamp
Product Information
The product is called MONO/MONO P-Z and it comes in different models: MONO 40,
MONO 60, MONO 80, and MONO 100. It is available in two versions: MONO and MONO
P-Z. The product features a color temperature switch for adjusting the color
temperature between 4,000K and 3,000K. There is also an optional prismatic
diffuser available for some models. The product is designed for indoor use
with an IP rating of 20. The product is powered by a driver that operates on a
voltage of 220-240V AC at a frequency of 50/60Hz. It supports different
dimming options including Push Dim, DALI/Push Dim, DALI Dim, and Triac Dim.
The specific dimming method depends on the model and
type of dimmer used.
For installation, it is important to turn off the main power before proceeding to prevent any possible electric shock. The installation should be carried out by a qualified technician or person. When handling the lampshade/diffuser, it should be done carefully as it is fragile. If the product has an integrated LED light source, only a technician or qualified person should perform the replacement. The manufacturer is not responsible for any incorrect use or assembly of the product. For more information, visit www.led2.eu.
Product Usage Instructions
- Before starting, turn off the main power to prevent electric shock.
- Ensure that the installation is carried out by a qualified technician or person.
- If the product has a lampshade/diffuser, handle it carefully as it is fragile.
- For models with an integrated LED light source, only a technician or qualified person should perform the replacement.
- Refer to the specific model and type of dimmer to determine the appropriate dimming method.
- Connect the product to the power supply using the provided driver. The driver operates on a voltage of 220-240V AC at a frequency of 50/60Hz.
- Follow the instructions for the chosen dimming method (Push Dim, DALI/Push Dim, DALI Dim, or Triac Dim) to control the brightness of the product.
- For adjusting the color temperature, use the color temperature switch. The available options are 4,000K and 3,000K.
- If desired, install the optional prismatic diffuser according to the provided instructions.
- Ensure that the product is used indoors only, as it is designed for indoor use with an IP rating of 20.
Note : It is important to follow all safety precautions and instructions provided in the user manual during installation and usage of the product.
The installation may only be carried out by a technician . This product contains a light source of energy efficiency class G
MONO 40, 60, 80, 100
MONO 40 P-Z MONO 60 P-Z
MONO 80 P-Z MONO 100 P-Z
CONNECTION – DIMMABLE VERSION – OPTIONAL
CAUTION!
Turn off the main power before proceeding with the installation in order to
prevent possible shock. The installation may only be carried out by a
technician or a qualified person. If the lamp has a lampshade/diffuser, handle
it carefully as it is fragile. With an integrated LED light source, only a
technician or a qualified person can make the replacement. The manufacturer is
not responsible for the incorrect use and assembly of its products.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>