Led2 LIGHTING Step IN Q LED Instruction Manual
- June 12, 2024
- Led2 LIGHTING
Table of Contents
Led2 LIGHTING Step IN Q LED
Product Information
- Model: x
- Dimensions: 62 mm x 62 mm x 70 mm
- IP Rating: IP54
- Manufacturer: www.led2.eu
(EN) CAUTION! Turn off the main power before proceeding with the installation in order to prevent possible shock. The installation may only be carried out by a technician or a qualified person. If the lamp has a lampshade/diffuser, handle it carefully as it is fragile. With an integrated LED light source, only a technician or a qualified person can make the replacement. The manufacturer is not responsible for the incorrect use and assembly of its products.
Product Usage Instructions
- Step 1: Ensure the main power is turned off before starting the installation process to prevent any potential electric shock.
- Step 2: The installation should only be performed by a technician or a qualified person.
- Step 3: If the lamp has a lampshade or diffuser, handle it with care due to its fragility.
- Step 4: In case of a replacement, with an integrated LED light source, it should be done by a technician or a qualified person.
Please note that the manufacturer is not liable for any misuse or improper assembly of its products.
- The installation may only be carried out by a technician.
- This product contains a light source of energy efficiency class G.
POWER
OFF
ON
INSTALLATION INSTRUCTIONS
FEATURES
CAUTION!
Turn off the main power before proceeding with the installation in order to
prevent possible shock. The installation may only be carried out by a
technician or a qualified person. If the lamp has a lampshade/diffuser, handle
it carefully as it is fragile. With an integrated LED light source, only a
technician or a qualified person can make the replacement. The manufacturer is
not responsible for the incorrect use and assembly of its products.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>