Arenti INDOOR1 Smart Indoor Wi-Fi Camera User Guide
- June 13, 2024
- Arenti
Table of Contents
INDOOR1
QUICK GUIDE
SMART INDOOR WI-FI CAMER
COMPATIBLE WITH AMAZON ALEXA & GOOGLE ASSISTANT
Quick start guide
Packing list
Product description
- LED indicator
- Microphone
- Speaker
- SD card slot
- Reset
- DC5V USB port
Notice
To reset the device, press and hold the reset button for 5s.
The camera beeps when the operation is completed.
LED indicator of camera:
Flashing red light (slow) | Wait for network config |
---|---|
Flashing red light (fast) | Connecting the network |
Fixed red light | Network is malfunctional |
Fixed blue light | Camera is working correctly |
Product configuration
Step 1 Turn on your camera.
Step 2 Connect your smartphone to the Wi-Fi network.
Step 3 Download Aren’t app from the App Store or
Google Play depending on your device.
Step 4 Launch the App and sign up for the first use.
Step 5 Follow the on-screen instructions to add your camera.
https://www.arenti.com/blogs/help_center
Notice
- If you have multiple cameras, please follow step 5 again to add devices one by one.
- To change Wi-Fi network, please restore the camera to factory settings and follow step 5 to add the camera.
Specification
Sensor type | 1/3″ CMOS |
---|---|
Min. brightness | Coloring 0.1Lux@F2.0 |
Black and white 0.01 Lux@F2.0
Pixel count| 3MP
Lens| 3.6mm F2.0
Shutter| 1/15-1/10,000s
Infrared| High power LED with ICR
Infrared distance| 10 meters
Video compression| H.264
Bit rate| 32Kbps-2Mbps
Max. resolution| 2304 x 1296
Framerate| 1-25/s
Picture settings| HD/SD switch; Flip video
Local storage| Micro SD card (up to 256GB)
Audio| Two-way audio
Protocols| HTTP, DHCP, DNS, TCP/IP, RTSP
WiFi standard| IEEE802.11b/g/n/ac
Frequency| 2.4GHz & 5GHz
Bandwidth| 20/40MHz
WiFi encryption| WPA-PSK/WPA2-PSK
Security| AES128
Working temperature| -20 °C-50 °C
Power| DC 5V, 1A
Consumption| Up to 2.5W
Size| 60mm x 57mm x 105mm
Model| TPA-67F050100VU01
Input voltage| 100-240Vac
Input frequency| 50-60Hz
Output voltage| +5Vdc
Output current| 1A
Output power| 5W
Efficiency| 73,62%
No-load consumption| <0.1W
Legal notice
Support
www.arenti.com
Symbols
Direct current (DC)
Don’t throw batteries or out of order products with the household waste
(garbage). The dangerous substances that they are likely to include may harm
health or the environment. Make your retailer take back these products or use
the selective collect of garbage proposed by your city.
** Hereby, Aren’t, declares that the radio equipment type ‘INDOOR1’ is in
compliance with the Directive 2014/53/EU
The full test of the EU declaration of conformity is available at the
following Internet address: https://www.arenti.com
For indoor use only FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC RF
Rules. This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other antenna
or transmitter. End-users and installers must be provide with
antenna installation instructions and consider removing the no-collocation
statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution!**
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
© 2022 Aren’t. All rights reserved. All trade names are registered trademarks
of respective companies Apple, the Apple logo, iPhone are trademarks of Apple
Inc. registered in the U.S. and other countries. Google, the Google logo,
Android are trademarks of Google Inc. App Store is a service mark of Apple
Inc.
Google Play is a service mark of Google Inc.
V1.0 202306
Documents / Resources
|
Arenti INDOOR1 Smart Indoor Wi-Fi
Camera
[pdf] User Guide
INDOOR1 Smart Indoor Wi-Fi Camera, INDOOR1, Smart Indoor Wi-Fi Camera, Indoor
Wi-Fi Camera, Wi-Fi Camera, Camera
---|---
References
- Arenti: Best Baby Monitor & Indoor/Outdoor Security Camera
- Arenti: Best Baby Monitor & Indoor/Outdoor Security Camera
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>