CRYSTORAMA ROY-801-BK Royston One Light Pendant Instruction Manual
- June 13, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA ROY-801-BK Royston One Light Pendant
Product Information
- This product is a lighting fixture model #ROY-801-BK manufactured by Crystorama.com. It has a sleek black finish and is designed to provide lighting for indoor spaces. The fixture is damp rated, making it suitable for installation in areas with high humidity.
- The product requires one medium base bulb with a recommended wattage of 40 Watts, with a maximum wattage of 100 Watts. LED bulbs are recommended for extended use.
- It is important to note that all electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes to ensure safety.
- Additionally, this product contains lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information, please visit www.p65warnings.ca.gov.
Product Usage Instructions
- Place the fixture parts on a soft cloth-covered platform before installation.
- Install the bulb (not included) into the socket. Screw the threaded pipe into the bottom of the harp and secure it with the hex nut
- Place the glass shade over the bottom of the threaded pipe and secure it with the plastic washer and finial.
- Determine the preferred hanging height and choose the correct number of rods needed.
- Feed the fixture wires through the rods and canopy. Screw the rods together.
- Screw one end of the rod assembly onto the top of the metal frame and the other end onto the swivel on the canopy.
- Install the mounting plate onto the outlet box and raise the fixture up to the ceiling.
- Complete the wire connection and secure the canopy onto the mounting plate using screws.
Dimension
MODEL # ROY-801-BK
WARNING:
- Electrical Danger
- Turn Power Off
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes
- You will need 1- Medium Base Bulb 40 Watts recommended 100 Watts Max.
- USE LED BULBS FOR EXTENDED USE The fixture is Damp rated.
HOW TO INSTALL
Place the fixture parts on a soft cloth-covered platform before installation of fixture.
- 1. Install the bulb(not included) into the socket.
- Screw the threaded pipe into the bottom of the harp and secure with hex nut.
- Place the glass shade over the bottom of threaded pipe.
- Secure with the plastic washer and finial.
- Decide the preferred hanging height and choose the correct number of rods needed.
- Feed the fixture wires through the rods and canopy.Screws the rods together.
- Screw one end of the rod assembly onto the top of metal frame and the other end onto the swivel on the canopy.
- Install the mounting plate onto the outlet box and raise the fixture up to the ceiling.
- After the wire connection is complete, secure the canopy onto the mounting plate using screws.
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm.For more information go to www.p65warnings.ca.gov
Part Number
- A. (1)-Mounting hardware
- Wire connector x2.
- Mounting plate x1.
- Mounting screw x2.
- B. (2)-Canopy screw
- C. (1)-Swivel
- D. (1)-Canopy(W5 1/8″xH1″) ; with 2 side holes. -XSN801BKCAN5.125IN
- E. (1)-H6″ Rod ; Ø15.8mm-XSN801BKROD6IN
- F. (3)-H12″ Rod ; Ø15.8mm-XSN801BKROD12IN
- G. (1)-Metal frame ; W6 7/8″ x H14″
- H. (1)-Nut
- I. (1)-Threaded pipe ; H3″
- J. (1)-Glass shade ; W6 1/2″ xH13 5/8″ -XSN801SHA13.625IN
- K. (1)-Plastic washer
- L. (1)-Finial-XSN800BKFIN
QR SCAN
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>