Direct Colors DC-CCD-1QT ProClean Degreaser Concrete Cleaner Concentrate User Guide
- June 13, 2024
- Direct Colors
Table of Contents
Direct Colors DC-CCD-1QT ProClean Degreaser Concrete Cleaner Concentrate
PROCLEAN DEGREASER™ HOW TO GUIDE
TOOLS FOR JOB
-
SURFACE PROTECTION
-
PERSONAL PROTECTION
-
APPLICATION TOOLS
-
CLEAN-UP
STEP 1: CALCULATE SOLUTION AMOUNT
- Determine project size in square feet.
- Remember, 1 gallon covers approximately 200 square feet.
STEP 2: SELECT CONCENTRATE SIZE
- ProClean Degreaser™ is available for making 1 or 5 gallons of solution.
STEP 3: MIX SOLUTION
- For 1 gallon: Mix 4 ounces of concentrate with 1 gallon of water.
- For 5 gallons: Mix 1 quart of concentrate with 5 gallons of water.
STEP 4: PREPARE SPRAYER/CONTAINER
- Remove filters if using a sprayer.
- Pour concentrate into sprayer or mixing container.
- Add corresponding water amount.
STEP 5: APPLY PROCLEAN DEGREASER™ SOLUTION
- Spray the entire surface with ProClean Degreaser™.
- Allow the solution to soak for 30 seconds.
STEP 6: CLEAN AND RINSE THE SURFACE
- Clean with a scrub brush, cotton mop, or low-speed buffer with brush attachment.
- Remove residue with a clean mop or wet-dry vacuum.
- Rinse surface thoroughly with water.
Coverage per Gallon: Approximately 200 Sq. Ft
Soak Time: 30 Seconds
Temperature Range: Apply Between 40°F (4°C) and 95°F (35°C)
Tools Clean-Up: ProClean Degrease TM and Warm Water
STEP 7: DRY SURFACE
Allow surface to dry for at least eight hours before applying stain or sealer.
CAUTION: ProClean Degreaser™ may be harmful if swallowed or ingested. Contact with skin can cause mild irritation. Avoid contact with eyes.
Disclaimer: Direct Colors does not warranty or guarantee results (outcomes). Concrete variations or improper application may cause unintended results. Test product on an inconspicuous or small area and allow to fully cure to ensure compatibility and desired result.
CUSTOMERS SUPPORT
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>